Jose Hernandez
Mont Belvieu
Summary
Dynamic Instrumentation and Electrical professional with extensive experience at Kent PLC, excelling in system commissioning and electrical troubleshooting. Proven track record in team leadership and problem-solving, ensuring safety system testing and instrument calibration meet rigorous standards. Committed to delivering results and enhancing operational efficiency in complex environments.
Overview
12
12
years of professional experience
Work History
I&C Commissiong Lead
Kent PLC
Port Arthur
11.2022 - Current
- Thoroughly review and close completed check sheets on Smart Completions.
- Sort through project punch list tracker and identify remedies for said punch items to cloud out I/O tasks.
- Delicate work front for technicians by filtering through system/subsystem tracker and assign teams tasks accordingly by priority areas.
- Create work permits using versify software based on available scope.
- Work with clients to create detailed punch items on assets and focus to remedy all existing issues regarding instrumentation.
- Assess damaged or non-working instruments and make very detailed descriptions of issues to log into our punch-list system.
- Perform loop test on functioning instruments such as level, temperature, pressure, and flow transmitters with varying field test equipment such as Emerson TREX hart communicators, high- and low-pressure hand pumps, and various Fluke multi-meters to ensure devices function properly.
- Coordinate with site SIS control room operators to test multiple fire and gas instruments such as flame detectors, Open path gas detectors, and single point gas detectors using test equipment such as IR/UV lamps, 50% LEL test gas mixtures, and various test films to trigger open path detectors.
I&E Turbine Specialist
ETEC
Auburndale
03.2022 - 06.2022
- Conduct all instrumentation and electrical duties of a major upgrade on a Siemens natural gas Turbine during plant outage.
- Demo all existing instrumentation on turbines and log and store all essential devices that are to be used with upgraded unit.
- Install all new instrumentation on new turbine shaft and bearings.
- Set gaps for all axial/radial vibrations and key phasers then then test Prox switches back to DCS.
- Install new thermocouples on turbine and test loops back to DCS.
- Assist plant with any instrumentation duties until startup.
Instrument Supervisor
Turn2 specialist
Wynnewood
01.2022 - 02.2022
- Organize and coordinate turnaround loops for shift I&E techs.
- Oversee techs and verify all work is being performed safely and up to plant code.
- Organize a 72-hour look-ahead work scope to keep production at a steady and safe rate.
- Conduct shift changeover with Night Shift foreman and discuss completed tasks and tasks that are expected to be completed according to plant schedule.
- Log and record all Delta-V I/O's that are being tested back to DCS to keep up with plant schedule.
- Assist I&E techs when troubleshooting Allen Bradley PLCs.
Commissioning I&E
NGF FIELD CONSTRUCTION
Scranton
11.2021 - 12.2021
- Troubleshoot electrical and instrumentation devices that have been damaged due to weather.
- Assist plant operators in bringing up new systems.
- Commission air compressors with vendors using various test equipment.
- Commission thermal oxidizer skids and trouble shoot wiring issues with the electrical team.
- Run SIS C&E with plant operators to verify safety system interlocks.
- Point to point and trouble shoot I/Os in Allen Bradley PLC cabinets.
Commissioning I&E Tech
SNC-Lavalin
Portland
09.2020 - 11.2021
- Commission plant systems/subsystems by completing all associated instrument loops.
- Complete all utilities systems C&E testing and logic method statements to bring it to a "ready for live process" status.
- Complete all commissioning, C&E, and method statements on Inst. Air compressors.
- Worked closely with Air products vendor to bring Air drier system up and running.
- Worked with a small team to bring up Boiler feed water system and test all Bentley Nevada vibrations back to DCS for BFW pumps and turbines.
- Simulated speed sensors along with axial and radial vibration probes with wobulators and frequency generators.
- Troubleshoot and diagnose faulty instruments using various test equipment.
- Commission all Allen Bradley compressor loop checks.
- Commission PLC and do serial interface checks back to DCS verifying correct addressing.
- Bring up H2 PSA skid and run method statement tests on all sequences of the skid.
Commissioning Inst. Tech Lead
S&B
Sweeny
04.2020 - 08.2020
- Work closely with ECT and MHI compressor vendors to commission and start up all site compressors.
- Work on verifying all compressor loops go through vendor HMI, then to DCS successfully.
- Troubleshoot vibration probe signals through Bentley-Nevada system.
- Troubleshoot Faulty Allen-Bradley I/Os.
- Pre-loop and function test compressor motors/pumps and associated HOAs including Lube oil pumps/heaters and seal gas boosters.
- Set, gap, and simulate all compressor radial and axial vibrations with shaker tables and wobulators while compressors in "mid-float".
- Work closely with vendor to commission and tune critical anti-surge and hot-bypass valves on compressor.
- Commission and simulate all instrument field devices by pumping up or driving signals to DCS to sell off to client.
- Commission compressor loops with vendors to start-up.
- Verify all VFDs working properly and test each loop to DCS.
- QC Instrumentation and make sure items are ready to be sold off.
- Trouble shoot transmitters and valves when not functioning properly with DCS.
Instrument tech
TASC
Pasadena
03.2020 - 03.2020
- Assist with loop checks of reinstalled instruments during plant turnaround.
- Perform function test on several instruments including electronic remote sensor levels (ERS), DP Flow transmitters, thermocouples, and a number of valves.
- Perform SIS checks on system critical equipment during plant shutdown.
- Work together as a team to fulfill clients' demands and get the job done correctly and safely.
Commissioning instrument tech
GATE ENERGY
Israel, Leviathan offshore platform
11.2019 - 12.2019
- Assist platform with commissioning and start up duties.
- Install new devices such as DP flow, pressures, levels, and temperature transmitters.
- Verify the loop in the field using 4-20 with DCS operators.
- Install and calibrate O2 analyzers using specific solutions and proper oxygen level.
- Troubleshoot valves and transmitters when necessary.
- Perform cause and effect procedures with DCS operators to verify interlocks.
- Troubleshoot Allen Bradley PLCs.
- Install AI/AO and DI/DO cards with proper fuses.
- Work closely with vendors for heat medium packages to assist in skid startups.
- Perform Black Out Grey Out tests with all exterior lighting in case of emergencies.
- Clear all punch list items.
Instrument tech
TASC
Pasadena
10.2019 - 11.2019
- Perform maintenance/preventative maintenance during plant turnaround.
- Disconnect and replace old faulty transmitters.
- Shoot 4-20MA to verify the new loop or simulate with hand pumps.
- Troubleshoot faulty and sticking valves.
- Perform interlock procedures using test equipment such as hand pumps, 789, 725, and 475s.
- Calibrate instruments by verifying MA output with 789 connected in series.
Commissioning Instrument Tech
SNC LAVALIN/KENTZ
Point Comfort
06.2019 - 09.2019
- Loop check instruments using a variety of test equipment such as low/high pressure pump and crystal, FLUKE 725, FLUKE 789, HART 475, Pie-Cal, TREX, and Wobulator.
- Troubleshoot devices and valves when necessary.
- Perform quality inspection on instruments. Ex. Checking tubing on transmitters was connected properly at taps, verifying flow elements were facing in proper direction, verifying manifolds and valves were installed correctly.
- Walk down instruments and perform 5-point checks to verify devices were ready for service.
- Simulate 4-20mA back to DCS with 475 to prove loops.
- Inspect integrity of existing loops via loop drawings and PIDs.
- Provide support for instrumentation in order to assist in facility start-up.
Commissioning Instrument Tech
EXCEL
Lake Charles
07.2018 - 05.2019
- Assist plant with commissioning and start up duties.
- Perform interlock test procedures with DCS support by simulating multiple devices and verifying the cause and effects in the field.
- Perform SIS loop checks back to DCS and time the open, close, and trip commands for SIS valves.
- Install and set gaps on vibration probes on compressors and steam turbines.
- Function test vibration probes with wobulator.
- Function test temperature elements by simulating high and low alarms with FLUKE 725 or Pie-Cal.
- Work closely with vendors to ensure skids are 100% and ready for startup.
- Complete walk down checklist and ensure all transmitters and elements are installed and ready for service using P&IDs and location drawings.
- Install DVC on valves and source 4-20mA to DCS to verify valves stroke.
- Troubleshoot devices and valves when necessary.
- Work closely with clients and perform whatever tasks necessary to assist in completing each unit.
- Uninstall, reinstall, and loop check valves or devices that were deemed faulty and needed replacement.
- Install/Replace transmitters when necessary.
- Loop check instruments using a variety of test equipment such as low/high pressure pump and crystal, FLUKE 725, FLUKE 789, HART 475, Pie-Cal, TREX, and Wobulator.
Instrumentation/Electrical
MMR Pro-Com
Crystal River
05.2018 - 07.2018
- Inspect electrical wiring in junction boxes were up site standards.
- Perform quality inspection on instruments. Ex. Checking tubing on transmitters was connected properly at taps, verifying flow elements were facing in proper direction, verifying manifolds and valves were installed correctly.
- Walk down instruments and perform 5-point checks to verify devices were ready for service.
- Simulate 4-20mA back to DCS with 475 to prove loops.
Electrical/Instrumentation
MMR Pro-Com
Pasadena
05.2018 - 05.2018
- Troubleshoot level transmitters using multiple test equipment (HART 475, FLUKE 789 etc.).
- Install MOVs and run cable/cable tray from motors to MCC.
- Install J-boxes and terminate MOV communication cables.
- Work closely with coworkers to clean up unattended punch list items.
Instrument tech
MMR Constructors
Pecos
03.2018 - 04.2018
- Provide support for instrumentation in order to assist in facility start-up.
- Installation of radar guided level transmitters on top of battery tanks.
- Calibration and Simulation of level transmitters using HART 475 and FLUKE 789.
- Inspect integrity of existing loops via loop drawings and PIDs.
Instrumentation/Inspection
MMR Pro-Com
Jacksonville
02.2018 - 02.2018
- Perform facility PM closely with facility staff and management.
- Assist client with Motor meg's 480/4160v motor.
- Inspect instrument loops to verify integrity of equipment via loop drawings and PIDs.
- Record amp drawing on pumps and motors to ensure proper functionality of equipment.
- Inspect landing points of all motors in MCCs.
- QC and document all electrical equipment including transformers, Transfer switches, AC panels, breaker boxes, conduit seals, and all related electrical equipment.
Instrumentation Technician
MMR Pro-Com
Baytown
06.2017 - 12.2017
- Testing, calibration, and troubleshooting of all types of instrumentation and devices used in the plant with various test equipment. (Fluke 789, HART 475, Pie-Cal 820, low/high pressure pumps, etc.)
- Worked on various Instruments and Smart valves such as Rosemount, Yokogawa, Endress Hausser, Fisher valves, Flowserve, Rotor while using HART and Foundation Fieldbus Protocol.
- Calibrated and stroke valves used 475 communicators on smart valves if needed, making sure that air supply, solenoids and indicators on valves all worked properly and matched position of valve.
- Calibrate and simulate level transmitters by measuring distances between taps and adjusting the upper and lower range values accordingly.
- Verify loop drawings on devices from the field to I/O Room (PLC), to control stations using test equipment and communication between control board operators.
- Verify loops on control valves and adjust limit switches or fix loop wires accordingly.
- Pressure test stainless tubing using pumps and manifolds to ensure no faults within the lines.
- Inspect each device for mechanical and electrical completeness and take actions to ensure so if needed.
- Verify and sign off on all completed loops and paperwork that pertained to each device.
- Work closely with team members and ensure all safety procedures are being conducted before each task.
Electrician
MMR Construction
LewisPort
05.2017 - 06.2017
- Work within a team daily to ensure the completion of jobs scheduled.
- Performed AC/DC electrical terminations accordingly to loop drawings and one-lines.
- Interpreted electrical and mechanical schematics, blueprints and diagrams.
- Assembled and installed wiring, electrical and electronic components.
- Meg and Terminated heavy gauge wire in MCC substations.
- Assist client with Motor meg's 480/4160v motor.
Electrical Solar Journeyman
Helix Electric
08.2016 - 01.2017
- Performed medium voltage DC terminations inside inverters and combiners.
- Interpreted electrical and mechanical schematics, blueprints and diagrams.
- Assembled and installed wiring, electrical and electronic components.
- Performed installation, repairs and maintenance of Inverters, AC/DC Disconnects and Performance meters.
- Installed and terminate wiring for solar communication systems.
- Installed solar array from the mechanics to the electrical and the aesthetics.
- Supervised 10-man crew with exceptional production outcome.
Solar Electrician
Mortenson Construction
06.2015 - 08.2016
- Work within a team daily to ensure the completion of jobs scheduled.
- Performed heavy labor, pulling large gauge wire, and smaller gauge wire to wire units to inverters.
- Install and terminate wiring for solar communication systems.
- Assembled and installed wiring, electrical and electronic components.
- Digging trenches for conduit, pulling wire through conduit to land to solar panel.
- Connect and crimp MC4 connections to terminate to combiner boxes, controller tracker boxes, and junction boxes.
Electrician
Hart Morris
03.2015 - 06.2015
- Run conduit and bend pipe according to wire diagrams and schematics.
- Run and install electrical wiring for large warehouses including breaker boxes, interior/exterior lighting, and electrical outlets.
- Set up temporary power using generators and inverters.
Instrumentation
JVC Oil Field Construction
02.2014 - 03.2015
- Build oil field production facilities. Perform maintenance on compressors, heater treaters, fire tubes, and pig receivers.
- Run electrical for control panels and bend stainless tubing for gas lines.
Education
Robotics & Mechatronics engineering - Corpus Christi, TX
Dell-Mar College
Corpus Christi, TX01.2023
Diploma - Floresville, TX
Floresville High School
Floresville, TX01.2010
NCCER Instrument Tech -
TWIC -
OSHA 10 -
Skills
- Instrument calibration
- Safety system testing
- Electrical troubleshooting
- System commissioning
- Team leadership
- Problem solving
References
References available upon request.
Timeline
I&C Commissiong Lead
Kent PLC
11.2022 - Current
I&E Turbine Specialist
ETEC
03.2022 - 06.2022
Instrument Supervisor
Turn2 specialist
01.2022 - 02.2022
Commissioning I&E
NGF FIELD CONSTRUCTION
11.2021 - 12.2021
Commissioning I&E Tech
SNC-Lavalin
09.2020 - 11.2021
Commissioning Inst. Tech Lead
S&B
04.2020 - 08.2020
Instrument tech
TASC
03.2020 - 03.2020
Commissioning instrument tech
GATE ENERGY
11.2019 - 12.2019
Instrument tech
TASC
10.2019 - 11.2019
Commissioning Instrument Tech
SNC LAVALIN/KENTZ
06.2019 - 09.2019
Commissioning Instrument Tech
EXCEL
07.2018 - 05.2019
Instrumentation/Electrical
MMR Pro-Com
05.2018 - 07.2018
Electrical/Instrumentation
MMR Pro-Com
05.2018 - 05.2018
Instrument tech
MMR Constructors
03.2018 - 04.2018
Instrumentation/Inspection
MMR Pro-Com
02.2018 - 02.2018
Instrumentation Technician
MMR Pro-Com
06.2017 - 12.2017
Electrician
MMR Construction
05.2017 - 06.2017
Electrical Solar Journeyman
Helix Electric
08.2016 - 01.2017
Solar Electrician
Mortenson Construction
06.2015 - 08.2016
Electrician
Hart Morris
03.2015 - 06.2015
Instrumentation
JVC Oil Field Construction
02.2014 - 03.2015
Robotics & Mechatronics engineering - Corpus Christi, TX
Dell-Mar College
Diploma - Floresville, TX
Floresville High School