JOSEPH MARTY
Covington,WA
Summary
OSHS 10 First aid/CPR/Defibrillator Extensive safety training Used technical knowledge, understanding of process flow, and networking skills to ensure issues are addressed and resolved by responsible support organization. Conducted assessments of processes and practices for comparison to applicable standards and criteria. Analyzed and interprets data. Provided feedback on assessment results. Assisted organizations in identifying reoccurring and high impact issues. Supported root cause analysis and corrective action plan to address reoccurring and high impact issues. Facilitated ongoing coordination and tracking of open items. Provided guidance and coaching to less experienced teammates experience in an aerospace, fabrication or manufacturing environment. Experience using LEAN Manufacturing and/or continuous Improvement practices and tools in the workplace. Experience in root cause analysis and corrective action. Experience in AS9100. Experience in a role that required excellent communication, collaboration, networking, and interpersonal skills experience in a role that required strong problem solving and analytical skills Developed, implemented and monitored occupational health and safety programs, processes, and standard operating procedures. Developed and provided training and instructions. Evaluated the impact of emerging issues, regulations and legislation to company operations. Developed corrective action plans to respond to internal/external audits and inspections. Planned and conducted health and safety audits for multiple locations.
Overview
14
14
years of professional experience
1
1
Certification
Work History
FLIGHT CONTROL MECHANIC
THE BOEING COMPANY
08.2018 - Current
- Performed and served as a flight control mechanic supporting Boeing wide body airplanes that required to install pulley and rig cables for major flight controls and worked on flaps, brakes, rudder, index plate, ailerons, transducers, auto throttle, pedals, dorsal fin, landing gear and tail fin
- Obtained job assignments from the supervisors, team leaders and used installation plans to organize and plan daily tasks per schedule demands
- Used various drilling tools to drill, ream, countersink full size holes in parts and assemblies to install cable control pulleys per drawings and specifications
- Installed and rigged control cables using Tension meter to set the cable tension and adjusted the engine throttle control system and ensured the actuator motors for full travel of flight control systems were met per Boeing’s specifications
- Checked for defects, removed/replaced parts and assemblies as required per pick-ups and rejection tags and ensured all foreign object debris has been removed
- Verified to ensure all job operations were complete and coordinated with inspection to perform an in-process checks
- Performed many tasks in confined spaces, and while using various lifts from heights while donning a harness.
- Maintained orderly and safe work environment by enforcing tool control and FOD awareness, prevention and safety at all times.
- Operated power tools, gauges and testing equipment to adjust, repair and replace faulty components in aircrafts.
DRIVER/MACHINE OPERATOR/FACILITY MANAGER
ASSOCIATED MACHINE AND FABRICATION
01.2014 - 01.2018
- Performed daily tasks for the shipping/receiving department and safely used the company vehicle to pick up parts
- Maintained the company vehicle in all aspects
- Operated the CNC and manual Mills, Lathes, saws, and ensured parts were within the required tolerances using precision measurement tools
- Identified materials before being used in production
- Helped the weld shop with projects
- Used various tools to grind, cut, bend, file, deburr, drill, counter sink, chase, thread, sand, chemical clean, ect
- Familiar with operating small cranes, boom lifts, various sizes of fork lifts, ect
- Developed and organized tool rooms and tool check out systems as the Facility Manager, oversaw the maintenance of all machines, company vehicles, company accounts, maintained and organized the facility and was responsible for safety throughout the facilities
- Worked directly with customers, venders, contractors, ect.
- Complied with company and OSHA safety rules and regulations.
- Monitored machines during operation to detect sounds of malfunction or excessive vibration and adjusted machines to eliminate problems.
- Operated machining equipment safely with team of operators.
- Set up and ran machinery to produce exceptional products for industrial needs.
- Assessed equipment after each production run and performed preventive maintenance to keep machines running smoothly.
- Maintained equipment performance by lubricating and cleaning components.
- Kept detailed production records and identified hold-ups.
- Updated daily production logs and informed management of production incidents or non-conformance issues.
- Identified malfunctions or failures by routinely monitoring and analyzing equipment operations.
- Tended operating machinery to identify equipment malfunctions and locate sources of product defects.
- Set up and operated various machine tools and jigs to produce precision parts.
- Set appropriate stops and guides to specified lengths as indicated by scale, rule or template.
- Dismantled machinery to access, remove and replace worn components and keep production within optimal tolerances.
- Read and interpreted blueprints and schematics for production runs.
- Manually set up machinery, lathes and grinders.
- Followed tooling instructions and product specifications to determine and implement operational sequences.
- Cross-trained existing employees to maximize team agility and performance.
- Accomplished multiple tasks within established timeframes.
- Maximized performance by monitoring daily activities and mentoring team members.
- Evaluated employees' strengths and assigned tasks based upon experience and training.
- Developed and maintained relationships with customers and suppliers through account development.
- Conducted monthly inventories of raw materials and components on work floor.
- Led warehouse improvement initiatives to advance operational efficiencies and increase revenue.
MACHINE OPERATOR/SAFETY AUDITOR
LONGVIEW FIBRE AND PACKAGING/KAPSTONE
01.2008 - 01.2013
- Operated the Martin 2300 Folder Flexor Gluer machine and changed the tools from the machines and problem solved issues as needed
- Oversaw the safety programs, provided orientations for external contractors, employees and new hires, regarding safety policies and developed safe processes and procedures for all jobs in the plant
- Led two or more safety meetings per week and assigned specific tasks to the safety captains and other employees within the plant
- Traveled to other plants and executed safety audits and analyzed data to research the root cause of safety hazards and conducted accident investigations
- Conducted accidents investigations and created monthly safety bonus programs to reward employees for remaining accident free and analyzed trends in order to develop processes and procedures to avoid accidents in all departments.
- Operated machining equipment safely with team of operators.
- Complied with company and OSHA safety rules and regulations.
- Set up and ran machinery to produce exceptional products for industrial needs.
- Monitored machines during operation to detect sounds of malfunction or excessive vibration and adjusted machines to eliminate problems.
- Calibrated, tested, and adjusted machine settings or controls in preparation for production operations.
- Assessed equipment after each production run and performed preventive maintenance to keep machines running smoothly.
- Kept detailed production records and identified hold-ups.
- Maintained equipment performance by lubricating and cleaning components.
- Updated daily production logs and informed management of production incidents or non-conformance issues.
- Identified malfunctions or failures by routinely monitoring and analyzing equipment operations.
- Followed tooling instructions and product specifications to determine and implement operational sequences.
- Inspected worksites, practices and gear for compliance with established safety standards.
- Inspected facilities for adherence to fire, hazard and safety guidelines.
- Responded to any emergencies as instructed and with utmost efficiency.
- Recognized, documented and advised on removal of hazards.
- Gathered information, prepared reports, and drafted correspondence related to cases.
- Conducted safety audits and investigated plant quality issues.
- Checked written JSAs and permits for adherence to regulations.
- Provided assistance in managing health and safety programs aligned with industry standards.
- Developed safety training procedures and authored manuals for distribution to staff members.
- Designed programs, policies, and procedures that were implemented to reduce or eliminate workplace injuries and hazards.
- Verified monthly practice of fire drills for every work shift.
- Provided instructions to staffers during fire drills and emergency evacuations.
- Streamlined and directed occupational safety trend and current hazards analyses.
- Identified and eliminated potential safety code deficits and addressed adequacy of fire exits, stairways, aisle spaces and sprinkler systems through annual inspections.
- Performed as safety consultant to deliver expertise in safety criteria, technical directives and operational methods.
- Reduced safety incidents by training and teaching risk management techniques, hazard identification, quality checks and documentation.
- Performed as safety consultant to deliver expertise in safety criteria, technical directives and operational methods.
- Demonstrated respect, friendliness and willingness to help wherever needed.
- Carried out day-day-day duties accurately and efficiently.
- Quickly learned new skills and applied them to daily tasks, improving efficiency and productivity.
- Developed and maintained courteous and effective working relationships.
- Identified issues, analyzed information and provided solutions to problems.
- Resolved problems, improved operations and provided exceptional service.
- Participated in team-building activities to enhance working relationships.
- Participated in continuous improvement by generating suggestions, engaging in problem-solving activities to support teamwork.
- Emphasized safe working and classroom conditions and practices.
- Increased student participation by facilitating interesting and relevant events.
- Used learning assessments to regularly monitor employee understanding of class concepts and materials.
- Observed other instructors and lecturers, gathering valuable techniques to be implemented into future lectures and courses.
Education
Kentwood High School
No Degree - Sociology, Finger Printing, Leadership.
Green River Community College
Auburn, WASkills
- Hazardous Materials
- Hand Saw
- Mechanical Fabrication
- Active Listening
- Safety Practices
- Mechanical Specifications
- Reading Comprehension
- Waste Elimination
- Parts Management
- Mechanical Troubleshooting
- Safety Understanding
- Hand Tool Use
- Mechanical Systems
- Personnel Records
- Socket Wrenches
- Building Materials
- Product Assembly
- Visual Inspection
- Clearing Debris
- Safety Regulation Adherence
- Quality Assurance
- Hand Trucks
- Item Transport
- Training Junior Team Members
- Blueprint Reading
- Schematics Reading
- Lockout and Tagout Processes
- Carbon Monoxide Detectors
- Environmental Contamination Prevention
- Dial Indicators
- Equipment Operation
- Project Development
- Work Assignments
- Employee Performance
- Deburring Skills
- Hand and Machine Tools
- Scissor Lifts
- Pneumatic Tool Use
- Environmental Compliance
- Data Collections
- Building Codes
- Machine Change-Overs
- Check Tolerances
- Smooth Finishes
- Repair Damages
- Locate Parts
- Manufacturing
- Customer Service
- Information Confidentiality
- Cost Management
- Staff Management
- Control of Expenses
- Greet Guests
- Fire Safety Regulations
- Quality Standards
- Customer Relationship Management
- Health and Safety Regulations
- Order Supplies
- Train Employees
- Verbal and Written Communication
- Employment Law
- Project Management
- Manage Inventory
- Risk Management
- Precious Metals
- Job Assignments
- Manufacturing Processes
- Coaching and Mentoring
- Stage Shows
- Assist Customers
- Negotiation
Accomplishments
- Equipment Maintenance
- Technical Expertise
- Performance Evaluations
- Hydraulic Equipment Installation
- Technical Documentation
- Safety Compliance
- HAZMAT Programs
- Strong work ethic
- Reliability
- The ability to work with a team
- Discipline
- Managment
- Leadership
Additional Information
- Experience coaching and developing others. Performed as an instructor in specialized safety and job training. Facilitated learning events and knowledge transfer by teaching and team coaching, observing and tracking student performance, and adding key insights. Conducted training utilizing a variety of delivery methods and techniques, and customize learning programs, courses, presentations and guides. Emphasized safety precautions to be taken in all training provided. Maintained a positive and productive learning environment, and address any problem behaviors in the classroom promptly in accordance with policies. Performed individual and group assessments, and recommended process and performance improvements. Served as a Subject Matter Expert (SME) to provide training consultation services. Provided extensive technical assistance in both formal classroom and hands-on training in a manufacturing environment. Conducted testing and evaluation per procedures. Evaluated technical skills and training needed. Developed post evaluation recommendations to determine appropriate training content and objectives. Identified and validated training by observing, measuring, testing, reviewing, and analyzing training to ensure that learning objectives are met effectively. Understands regulations and standards, ensures delivery of courseware complies with commercial, government, regulatory and organizational standards and specifications. Supported projects designed to produce educational deliverables. (Quality and safety “rodeos”) Performed ongoing monitoring of stakeholders operating environment and key business measures and objectives. Identified potential issues that impacted performance. Identified root cause of issues through analysis. Implemented corrective action plan/solutions. Coached and developed less experienced auditors/employees. Offer a variety of proven safety and ergonomic solutions through interactive displays, and electronic content Partner with research groups, innovation cells, engineering groups, employee involvement teams and individual employees to develop, share, and replicate solutions Bring cross functional teams to develop safety and ergonomic solutions for complex manufacturing issues Provide crew safety meetings, employee involvement meetings, safety solution development meetings, and special safety events.
Certification
Pneumatic Pressure Test, Q.A.
Electrical bonding Type VII - Inspection for BAC5117-1 thru BAC5117-14 (6C64267)
Seal: Inspection per BAC5000, BAC5030, BAC5108, BAC5504, BAC5505, BAC5516, and BAC5117
Electrical Inspection - Shield Terminations (6C64647)
Inspection of Terminals and Splices (6C64648)
Bond and Ground Resistance Measurement Type I (6C64814)
Aircraft Confined Space Entry Safety
Tool Certification
Occupational Health Exam - Respirator User
Electrical bonding, Type VII – Inspection for BAC5117-15 thru BAC5117-20 (TR002821)
Shot Peen Self-Contained Inspector
Cadmium Hazard Awareness
Hazardous Waste Generators Training
CSCHA LMSafeLink Radio User
Airplane Hazardous Energy
Hazard Communication
Silicone Sealant Inspection for Aircraft
Personal Protective Equipment
Pneumatic Pressure Test, Q.A.
Timeline
FLIGHT CONTROL MECHANIC
THE BOEING COMPANY
08.2018 - Current
DRIVER/MACHINE OPERATOR/FACILITY MANAGER
ASSOCIATED MACHINE AND FABRICATION
01.2014 - 01.2018
MACHINE OPERATOR/SAFETY AUDITOR
LONGVIEW FIBRE AND PACKAGING/KAPSTONE
01.2008 - 01.2013
Kentwood High School
No Degree - Sociology, Finger Printing, Leadership.
Green River Community College