JOSEPH SCHWAB

Scotts Booster Phase 7

Inspected the installation of a 3-phase separator, new compressor skid, and the establishment of a new power distribution area.

inspected the install of a new Dehydration (Dehy) Building, overseeing the installation of electrical systems to ensure compliance with industry standards and project specifications.

• Inspected wiring installations for proper grounding, overcurrent protection, continuity of circuits, polarity, size of conductors, insulation resistance values.
• Read and interpreted drawings and assessed construction against plans.
• Maintained up-to-date knowledge of inspection techniques, codes, ordinances and regulations.
• Performed inspections of electrical systems and components to ensure compliance with applicable codes and standards.
• Verified the correct installation and wiring of electrical components, including lighting, control panels, motors, and instrumentation, to ensure functionality and safety.
• Conducted thorough inspections of electrical equipment, ensuring adherence to regulatory requirements and manufacturer specifications.
• Collaborated closely with contractors, project managers, and engineering teams to address any issues or discrepancies identified during inspections, providing technical expertise and guidance.
• Prepared detailed inspection reports documenting findings, observations, and recommendations for corrective actions, ensuring transparency and accountability throughout the inspection process.
• Communicated effectively with stakeholders to provide updates on inspection progress and ensure alignment with project objectives and timelines.

Lonetree Meter Upgrade

Conducted thorough inspections of contractor-performed removal of two existing meter runs and installation of two new upsized meters, ensuring adherence to project specifications and safety standards. Verified the removal of existing wiring and supervised the install of new wire for three meters, ensuring proper installation techniques and compliance with regulatory guidelines.

• performed inspections of electrical systems and components to ensure compliance with applicable codes and standards.
• Inspected wiring installations for proper grounding, overcurrent protection, continuity of circuits, polarity, size of conductors, insulation resistance values.
• Performed inspections of current construction, refurbishment and repair projects.
• Collaborated closely with contractors to address any discrepancies or challenges identified during inspections, providing guidance and solutions to ensure project success.
• Utilized extensive knowledge of electrical codes and standards to evaluate the safety and efficacy of electrical systems and components.
• Prepared detailed inspection reports documenting findings, observations, and recommendations for corrective actions, ensuring transparency and accountability throughout the inspection process.
• Communicated effectively with project stakeholders to provide updates on inspection progress and ensure alignment with project objectives and timelines.
• Worked with Tallgrass Measurement to verify commissioning documents were filled out.
• Assisted with any need during commissioning.

Grayrocks Pump Building

Conducted comprehensive inspections of contractor-installed new buildings over existing pumps, ensuring seamless integration and adherence to project specifications. Verified the installation of various electrical equipment, including lights, gas detectors, fire eyes, and Emergency Shutdown (ESD) buttons, to guarantee functionality and compliance with regulatory requirements.

• Performed inspections of electrical systems and components to ensure compliance with applicable codes and standards.
• Inspected wiring installations for proper grounding, overcurrent protection, continuity of circuits, polarity, size of conductors, insulation resistance values.
• Performed inspections of current construction, refurbishment and repair projects.
• Collaborated closely with contractors to address any discrepancies or challenges identified during inspections, providing guidance and solutions to ensure project success.
• Utilized extensive knowledge of electrical codes and standards to evaluate the safety and efficacy of electrical systems and components.
• Prepared detailed inspection reports documenting findings, observations, and recommendations for corrective actions, ensuring transparency and accountability throughout the inspection process.
• Communicated effectively with project stakeholders to provide updates on inspection progress and ensure alignment with project objectives and timelines.

Meeker Meter Reversal

Worked with contractors to coordinate the removal of existing meter and installation of new piping to reverse the flow of the meter. Assisted in the addition of two new control valves, ensuring seamless integration with existing electrical systems and functionality.

• Conducted thorough inspections of the installation process to verify proper installation techniques and adherence to regulatory guidelines.
• Performed inspections of electrical systems and components to ensure compliance with applicable codes and standards.
• Communicated effectively with project stakeholders to address any challenges or concerns and ensure project objectives were met.
• Prepared detailed inspection reports documenting the installation procedures, findings, and any recommended corrective actions.
• Worked closely with contractors to implement necessary changes and ensure compliance with project timelines and budgetary constraints.
• Inspected wiring installations for proper grounding, overcurrent protection, continuity of circuits, polarity, size of conductors, insulation resistance values.
• Wrote full reports outlining results of inspections.
• Performed inspections of current construction, refurbishment and repair projects.

Cheyenne Hub Units 5 and 6

Conducted detailed inspections of electrical installations for 2 Cat 3616 compressors and associated aerial compressors.

Verified the correct installation of electrical components, including wiring, controls, and safety devices, in accordance with specifications and regulatory requirements.

• Collaborated closely with contractors and project teams to address any issues or discrepancies identified during inspections.
• Utilized technical expertise and knowledge of industry best practices to ensure the safe and efficient operation of electrical equipment.
• Prepared comprehensive inspection reports documenting findings and recommending corrective actions as needed.
• Communicated effectively with stakeholders to provide updates on inspection progress and ensure project objectives were met.
• Assist in the commissioning of electrical equipment, including testing functionality, verifying connections, and ensuring system integrity.
• Performed inspections of electrical systems and components to ensure compliance with applicable codes and standards.

9 LSPI DRA skids

Inspected the electrical install of 9 DRA skids from Sterling Colorado, to McPhersons Kansas

• Conducted thorough inspections of electrical installations for 9 DRA skids, spanning from Sterling, Colorado, to McPherson, Kansas.
• Verified that electrical systems met specifications, codes, and standards throughout the installation process.
• Collaborated closely with contractors and project teams to address any issues or concerns identified during inspections.
• Utilized industry knowledge and expertise to ensure the safe and efficient operation of electrical equipment.
• Generated detailed inspection reports, documenting findings and recommending corrective actions as necessary.
• Communicated effectively with stakeholders to provide updates on inspection progress and ensure project milestones were met.
• Assisted Tallgrass Automation with commissioning needs.

Buckingham pump station modifications

Worked with electrical contractor to finish the install of 1 4160 pump and new PDC. Collaborated closely with OTS to ensure thorough completion and finalization of commissioning documentation. Provided support to Tallgrass Automation, addressing any requirements or challenges during commissioning activities.

• Conduct inspections of electrical installations, including but not limited to 4160-volt pumps and Power Distribution Centers (PDCs), to ensure compliance with applicable codes, standards, and specifications.
• Inspect the work completed by electrical contractors, focusing on installation accuracy, proper wiring, and adherence to safety protocols.
• Provide guidance and assistance to electrical contractors during the installation process, offering insights to ensure quality workmanship and compliance.
• Assist in the commissioning of electrical equipment, including testing functionality, verifying connections, and ensuring system integrity.
• Document inspection findings, issue reports, and maintain detailed records of inspections conducted and corrective actions taken.

Grayrocks Pump Station

Worked with contractor to watch the install of three 6000hp units fed with 6.6kv power. Also inspected various electrical components, including the installation of a PDC building equipped with three VFDs, main switchgear, and a 480v UPS system. Experienced in overseeing the installation of critical infrastructure such as a re-closer and transformer, managing the transformation of power from 34.5kv to 6.6kv. Collaborated closely with OTS to ensure thorough completion and finalization of commissioning documentation. Provided support to Tallgrass Automation, addressing any requirements or challenges during commissioning activities.

• Coordinated with OTS for timely completion of commissioning documentation.
• Ensured adherence to project timelines and quality standards.
• Assisted Tallgrass Automation with commissioning needs.
• Inspect the work completed by electrical contractors, focusing on installation accuracy, proper wiring, and adherence to safety protocols.
• Provide guidance and assistance to electrical contractors during the installation process, offering insights to ensure quality workmanship and compliance.
• Assist in the commissioning of electrical equipment, including testing functionality, verifying connections, and ensuring system integrity.
• Document inspection findings, issue reports, and maintain detailed records of inspections conducted and corrective actions taken.

PEGE Pipeline from Guernsey, WY to Buckingham,CO

• Detail-oriented and experienced professional with a background in working with tie-in crews to ensure the seamless integration of pipeline sections.
• Proficient in inspecting underground pipeline coatings and overseeing the lowering-in process of pipe sections for tie-ins. Skilled in ensuring compliance with safety standards and regulations while maintaining project timelines and quality standards.
• Verified coating thickness using ultrasonic gauges and holiday detectors.
• Monitored surface preparation for proper cleaning prior to applying coatings.
• Performed visual inspections of coated surfaces for holidays, pinholes and other imperfections.
• Prepared detailed reports summarizing inspection results and recommended corrective action as needed.
• Utilized a variety of specialized tools such as wet and dry film thickness gages, dewpoint meters, Elcometers., during inspections.

Cheyenne Hub Enhancement

Worked on the Cheyenne compressor station Phase 2 and 3. Installing 4 cat 3616 and areial compressors. Along with cooling fans for each one. Installing of Multiple valve sets for flow control, installing of 10 PCV skids. Installing of 5 filter separators.

• Inspected the install, terminations, and commissioning of all electrical equipment.
• Kept a smartsheet to track all progress fo electrical .
• Filled out tallgrass daily reports.
• Performed inspections of electrical systems and components to ensure compliance with applicable codes and standards.
• Inspected wiring installations for proper grounding, overcurrent protection, continuity of circuits, polarity, size of conductors, insulation resistance values.
• Provided technical guidance during construction activities regarding safety precautions related to electrical work.
• Ensured that all installation work was performed according to approved drawings and specifications.
• Verified that materials used were properly listed or labeled for the intended use before installation began.
• Attended regular meetings with project managers to discuss progress updates on jobsites.
• Wrote full reports outlining results of inspections.

Summit TPC Project

Worked in Hereford Colorado on the summit Trailblazer meter station

• Inspected the install, termination, and commissioning of all electrical equipment.
• Inspected the install of the fence and grounding around fence.
• Filled out tallgrass daily reports.
• Performed inspections of electrical systems and components to ensure compliance with applicable codes and standards.
• Inspected wiring installations for proper grounding, overcurrent protection, continuity of circuits, polarity, size of conductors, insulation resistance values.
• Provided technical guidance during construction activities regarding safety precautions related to electrical work.
• Supervised and monitored backfill operations, ensuring that safety protocols were followed at all times.
• Monitored surface preparation for proper cleaning prior to applying coatings.
• Performed visual inspections of coated surfaces for holidays, pinholes and other imperfections

Hereford Pipeline

Worked on Hereford meter station, Pawnee meter station and the hereford pipeline in Hereford CO

• Inspected the install, terminations, and commissioning of all electrical equipment.
• Filled out tallgrass daily reports.
• Performed inspections of electrical systems and components to ensure compliance with applicable codes and standards.
• Inspected wiring installations for proper grounding, overcurrent protection, continuity of circuits, polarity, size of conductors, insulation resistance values.
• Provided technical guidance during construction activities regarding safety precautions related to electrical work.
• Supervised and monitored backfill operations, ensuring that safety protocols were followed at all times.
• Monitored surface preparation for proper cleaning prior to applying coatings.
• Performed visual inspections of coated surfaces for holidays, pinholes and other imperfections

Glenn Rock Compressor Station

Worked on inspection team on installing a cat 3608 at Glenn Rock compressor station in Glenn Rock WY.

• Inspected the install, terminations, and the commissioning of all electrical equipment.
• Inspected the install of the Cat3608 and the areial compressor.
• Inspected the install of all helical piers and concrete install for filter separator and intake box.
• Filled out tallgrass daily reports.
• Performed inspections of electrical systems and components to ensure compliance with applicable codes and standards.
• Inspected wiring installations for proper grounding, overcurrent protection, continuity of circuits, polarity, size of conductors, insulation resistance values.
• Provided technical guidance during construction activities regarding safety precautions related to electrical work.
• Verified that materials used were properly listed or labeled for the intended use before installation began.
• Performed inspections of electrical systems and components to ensure compliance with applicable codes and standards.
• Inspected wiring installations for proper grounding, overcurrent protection, continuity of circuits, polarity, size of conductors, insulation resistance values.
• Provided technical guidance during construction activities regarding safety precautions related to electrical work.
• Supervised and monitored backfill operations, ensuring that safety protocols were followed at all times.
• Monitored surface preparation for proper cleaning prior to applying coatings.
• Performed visual inspections of coated surfaces for holidays, pinholes and other imperfections

Iron Horse Pipeline

Worked with the inspection team on Iron Horse Pipeline in Douglas WY.

• Inspected Right a way clearing and trenching.
• Inspected Pipe bending crew bend pipe
• Filled out tallgrass daily reports.
• Performed inspections of electrical systems and components to ensure compliance with applicable codes and standards.
• Inspected wiring installations for proper grounding, overcurrent protection, continuity of circuits, polarity, size of conductors, insulation resistance values.
• Provided technical guidance during construction activities regarding safety precautions related to electrical work.
• Supervised and monitored backfill operations, ensuring that safety protocols were followed at all times.
• Monitored surface preparation for proper cleaning prior to applying coatings.
• Performed visual inspections of coated surfaces for holidays, pinholes and other imperfections.

Segment 55 Depth of cover

Worked on Depth of cover for segment 55 in Wheatland WY

• Inspected contractor southeast boring bore 3 total bores over 1000ft
• Inspected RMLS perform multiple hydro test
• Inspected the install of ARO pipe and inspected coating on piping.
• Inspected the install of all MLV and the install of all the electrical
• Inspected paint at all MLVs
• Filled out tallgrass daily reports.
• Performed inspections of electrical systems and components to ensure compliance with applicable codes and standards.
• Inspected wiring installations for proper grounding, overcurrent protection, continuity of circuits, polarity, size of conductors, insulation resistance values.
• Provided technical guidance during construction activities regarding safety precautions related to electrical work.
• Maintained records of inspection results including photos taken at job sites when necessary.

Natoma Pump Station

Worked on inspection team for the install of 4 truck bays and a booster pump at natoma pump station in natoma KS.

• Inspected pipe coating and paint
• Inspected the install of all electrical equipment , high pot 4160 cabling, meager testing on all 480v circuits.
• Went through commissioning of all equipment with tallgrass.
• Inspected the install of a 750hp can pump.
• Filled out tallgrass daily reports.
• Inspected all electrical components for damage or wear and tear.
• Performed inspections of electrical systems and components to ensure compliance with applicable codes and standards.
• Ensured that all installation work was performed according to approved drawings and specifications.
• Inspected wiring installations for proper grounding, overcurrent protection, continuity of circuits, polarity, size of conductors, insulation resistance values.

Rex Zone 3 Capacity Enhancement

• Worked on REX Zone 3 Capacity Enhancement, which consisted of 3 grass root Solar turbine stations.
• 1-3 unit station added to existing station, and gas cooling added to another.
• 6 months at Hamilton, in Ohio supervising installation of cooler fans.
• Saint Paul, in Indiana worked with Tallgrasses IEC group verifying wire labeling and completion of wire pulls and device termination.
• Verified punch list items were being completed.
• Washington Court House, in Ohio worked with Tallgrasses IEC group verifying wire labeling and completion of wire pulls and device termination.
• Verified punch list items were being completed.
• Columbus, in Ohio worked with Tallgrasses IEC group verifying wire labeling and completion of wire pulls and device termination.
• Verified punch list items were being completed.
• Chandlersville, in Ohio worked with Tallgrasses IEC group verifying wire labeling and completion of wire pulls and device termination.
• Verified punch list items were being completed.
• Also worked 2 months supervising exhaust insulation install.

• Worked at Fire Detection Systems as a programmer for fire systems.
• Did trouble shooting.
• Worked with Excel spreadsheets doing reports.
• Worked with customers and computers daily.
• Also worked as service tech.

• Worked summers at C & S Specialty Systems installing fire alarm systems, access control systems, tv systems, phone systems, and rescue assistance.
• Worked with prints.
• Read prints.
• Worked with general contractors and other trades.
• Work at C & S Specialty Systems as a foreman.
• Did troubleshooting for all systems.
• Worked with prints and read lined.
• Supervised a crew of 4.
• Worked with general contractors and other trades.