Joshua Courtney

• Installing instruments per detail
• Installing steam tracing on pipes according too drawings
• Pulling dekron

• Bending and installing tubing tray for rack tubing and dekron
• Bending 1/4,3/8,1/2 tubing for pneumatic and analyzer systems
• Installing instruments per detail
• Testing fitting and tubing

• Walking down systems too identify what scope of work there is
• Bending and installing small bore pipe for gas units
• Fitting several different material for the welder
• Installing instruments per detail

• Bend and installed 1/4”, 1/2” flared tubing on panels
• Hanging iron for skids
• Rigging pipe
• Bolting up flanges and torqueing too the required specs
• Bent and installed 3/4” and 1” flared tubing on skids

• Assemble and instaled instruments according too specifications
• Bent and installed 1/4”,3/8”,1/2”,3/4”,1” tubing for air, process/steam, jacket oil
• Bent and installed tubing tray
• Walking down systems too verify what the task needed at hand

• Installed instruments and instrument stand for fire and gas systems
• Bent and istalled tubing tray
• Bent and stalled 1/2” tubing for air supply on control valves
• Installed tubing bundle and tray from instrument too the taps
• Walked down systems to verify taps associated with instrument according too the P&Id’s

• Demolition of existing tubing from the paper mill
• Bent and installed 3/8”, 1/2”,5/8”,1” tubing for air, process, and lube oil
• Fixed different parts for start up
• Installed control panels for pneumatic air systems

• Routed and installed steam trace on piping
• Bent and installed tray for tubing bundle
• Mounted instruments

• Demolition of tube bundle and panels
• De terming old instruments and taking out of use
• Installing old instrument into new panels
• Walking down high pressure steam lines for tubing bundle too be pulled

• Mounted instrument stands
• Installed instruments
• Bent and installed 1/4” , 1/2”, 1”, tubing for air and different process systems
• Installed 1/2”, 3/4”, 1” screw pipe
• Pneumatic testing on tubing lines

• Installed instrument and instrument stands according too drawings and specs
• Bent and installed 1”, 3/4”, 1/2”, 3/8”, 1/4” tubing for instrument air and different process
• Installed instrument air headers
• Performing precise measurements everyday for the task at hand
• Installing instrument tray and supports
• Walking down systems with P&ID’s, location drawings and details.

• Cut, threaded, and installed instrument air and water screw pipe for control valves and pumps
• Bent and installed 1”, 3/4”, 1/2”, 3/8” tubing for instrument air, lube oil, hydraulic systems
• Installed sveral different types of instruments according to specs and details
• Fixed leaks and spills for the start-up of the paper machine

• Installed industrial instruments and equipment.
• Bent and installed instrument tray for tubing bundle
• Tied in high pressure steam tubing bundle for instuments and taps
• Hooked up air supply too control valves

installed instruments according too specs

installed instrument stands according to location

bent and installed aluminum tubing tray

ran 1", 3/4", 1/2", 3/8", 1/4" tubing for process tubing, oil, sample, and air supply

worked with commission too open and close valves

• installed dekoron tubing bundles
• fabbed and installed aluminum tray for dekoron and tubing
• fabbed and installed supports for tray
• ran 1", 3/4", 1/2", 3/8", 1/4" process tubing, oil, and air supply.
• installed instuments according too specs
• installed instrument stands according location specs
• able to read too read p&ids, location drawings, isometrics, and blueprints for any scope work

• Fabricated and installed aluminum tubing tray for process tubing and air supply.
• Performed taking measurements and bending 1/2” tubing for process supply to instruments.
• Bending and installing 3/8” tubing for air supply to control valves.
• Mounted instrument stands and instruments.
• Worked for start up and commissioning group.
• Performed daily inspections on operating equipment and used testing devices on this equipment.

• Fabricated and installed aluminum tubing tray for process tubing and air supply.
• Installation of multiple tubing racks to supply process instruments on the heater decks.
• (1/2” tubing).
• Fabricated and mounted instrument stands.
• Also, mounted the instruments per detail and specs.
• Bending and installing tubing for air supply to control valves.

• Fabricated and installed electrical cable tray.
• Installed electrical conduit for: instruments, j-boxes, panels, lighting and heat trace.
• Terminated j-boxes for heat trace.
• Also, terminated power boxes, splice kits, and end light connections for heat trace.
• Pulling wire and dekoron.
• Working with QC and commissioning to sell off heat trace items.
• Megging heat trace cables and troubleshooting to find the problem.
• Worked on punch list crew.
• Fixing different items like; grounding, cable tags, terminations, conduit, and phoning out wires.

• Pulling wire in cable tray and duct banks.
• Feeding wire up into the MCC's.
• Excavating and trenching for duct banks.
• Installing grounding for structures and cable tray.