Joshua Perez

Storage Tank builder: weld and fit components for Construction of storage tanks.

• Welded in flat, horizontal, vertical, and overhead positions.
• Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
• Demonstrated versatility in various welding methods including MIG, TIG, Stick, and Flux Core Welding techniques.
• Inspected welds and checked critical measurements to meet specifications.
• Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
• Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
• Prepared welding equipment to perform advanced welding work.
• Enhanced welding quality by following precise welding procedures and maintaining proper equipment settings.
• Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
• Utilized blueprints and diagrams to compare finished products against design specifications.
• Reduced workplace accidents through strict compliance with safety regulations and guidelines.
• Delivered high-quality customer service as a reliable and skilled welder, contributing to positive company reputation and repeat business.
• Assisted in blueprint reading and interpretation for accurate alignment of parts during assembly process.
• Completed welding projects using gas
• gas metal arc, flux-cored arc, and shielded metal arc equipment.
• Optimized material usage by accurately measuring and cutting required components prior to welding.
• Collaborated with team members for seamless project execution, improving overall productivity.
• Set up and operated shielded metal arc and gas metal arc welding equipment.
• Chipped off excess weld, slag, and spatter using hand tools.
• Conducted thorough inspections of welds to ensure adherence to industry standards and codes.

Repaired deck of Barge, by removing bad spots with torch. Refitted angle supports with new angle and covered with new plate, welded with fluxcore.

• Fabricated and welded components to assemble structural forms, such as machinery frames, tanks.
• Monitored the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of materials.
• Repaired broken or cracked parts using cutting torches and welding equipment.
• Maintained a clean working environment by removing scrap metal from work areas.
• Set up welding machines based on the job at hand.
• Operated manual or semi-automatic flame-cutting equipment to cut metal for fabrication of products.
• Applied shielded metal arc welding techniques with electrodes in flat, horizontal vertical positions as well as overhead applications.
• Conducted flux core arc welding when applicable.
• Ensured that all welds met code requirements through visual inspection methods such as radiography testing where applicable.
• Cleaned joints before beginning any type of welding process by chipping off slag with a hammer or wire brush.
• Performed preventative maintenance on welding tools and equipment.
• Gathered required materials for each project in order to meet production deadlines.
• Determined appropriate filler metal type based on joint design and material being joined together.
• Adjusted settings on machines such as current level so it matches the specifications outlined in blueprints and drawings.
• Troubleshot problems related to welds including porosity issues caused by improper shielding gas flow rates.
• Set up equipment and welded parts according to welding chart specifications and type.
• Scraped off excess spatter using portable grinders and arc-cutting equipment.
• Operated manual and semi-automatic welding equipment in vertical, horizontal and overhead positions.
• Repaired structures by dismantling, reshaping and reassembling metal components with cutting torches and hand tools.
• Prepared broken parts for welding by properly grooving and scarfing surfaces.
• Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
• Operated manual and semi-automatic welding equipment to fuse metal segments together.
• Completed minor torch ups with MIG welders.
• Adjusted gas flow and pressure to create and maintain desired flames.
• Welded components in flat, vertical or overhead positions.
• Welded fabrication materials, continuously checking for safety and quality.
• Prepared material surfaces for welding by removing scale, rust or other foreign matter.
• Prepared workpiece edges by grinding, cutting, buffing or bending to verify snug fit.
• Adjusted weld machines to correct settings for precision and waste reduction.
• Cut, contoured and beveled metal and structural shapes to achieve accurate dimensions.

• Fabricated and welded components.
• Monitored the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Repaired broken or cracked parts using cutting torches and welding equipment.
• Maintained a clean working environment by removing scrap metal from work areas.
• Performed preventative maintenance on welding tools and equipment.
• Gathered required materials for each project in order to meet production deadlines.
• Set up welding machines based on the job at hand.
• Operated manual or semi-automatic flame-cutting equipment to cut metal for fabrication of products.
• Utilized oxyacetylene torches for preheating metals prior to welding or bending them into desired shapes.
• Applied shielded metal arc welding techniques with electrodes in flat, horizontal vertical positions as well as overhead applications.
• Conducted flux core arc welding when applicable.
• Trained apprentices in safety procedures and use of tools, equipment used during fabrication, welding operations.
• Ensured that all welds met code requirements through visual inspection methods such as radiography testing where applicable.
• Cleaned joints before beginning any type of welding process by chipping off slag with a hammer or wire brush.
• Determined appropriate filler metal type based on joint design and material being joined together.
• Adjusted settings on machines such as current level so it matches the specifications outlined in blueprints and drawings.
• Troubleshot problems related to welds including porosity issues caused by improper shielding gas flow rates.
• Read blueprints and drawings and took measurements to plan layout and procedures.
• Set up equipment and welded parts according to welding chart specifications and type.
• Used welding skills to help repair and maintain heavy-duty machinery.
• Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
• Laid out, positioned, aligned and secured parts and assemblies with straightedges, squares and calipers.
• Scraped off excess spatter using portable grinders and arc-cutting equipment.
• Operated manual and semi-automatic welding equipment in vertical, horizontal and overhead positions.
• Repaired structures by dismantling, reshaping and reassembling metal components with cutting torches and hand tools.
• Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
• Completed minor torch ups with MIG welders.
• Adjusted gas flow and pressure to create and maintain desired flames.
• Welded components in flat, vertical or overhead positions.
• Welded fabrication materials, continuously checking for safety and quality.
• Prepared material surfaces for welding by removing scale, rust or other foreign matter.
• Prepared workpiece edges by grinding, cutting, buffing or bending to verify snug fit.
• Cut, contoured and beveled metal and structural shapes to achieve accurate dimensions.
• Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
• Aligned and clamped workpieces using rules, squares or hand tools.
• Fabricated and welded components to assemble structural forms, such as machinery frames, tanks, pressure vessels, and furnace shells.
• Constructed templates and jigs for fabrication according to blueprints.
• Inspected completed work for conformance to specifications using various instruments.
• Read blueprints, drawings related to projects in order to determine proper dimensions of components being fabricated, welded together.
• Rigged for heavy lifts according to blueprint requirements.
• Improved lifting efficiency with proper selection of rigging equipment for specific tasks.
• Increased workplace safety by conducting regular rigging inspections and equipment maintenance.
• Worked at heights and in confined spaces without difficulty.
• Rigged cables and pipes in configurations to support loads and maintain crew safety.
• Ensured compliance with OSHA regulations by implementing safe work practices at all times during rigging operations.
• Secured safety equipment and always used gear according to requirements.
• Assisted in the development of lift plans, considering factors such as load weights, rigging capacities, and crane positioning.
• Assisted crane operators in making critical decisions regarding lift strategies while maintaining open lines of communication throughout the process.
• Prepared and erected steel, torque and bolt-up connections.
• Communicated with equipment operators to accomplish smooth and efficient transports.
• Performed load calculations, ensuring the safe and effective execution of lifting operations.
• Enhanced team productivity through clear communication with colleagues regarding job assignments and expectations.
• Determined correct rigging requirements for equipment based on job specifications and environmental conditions.
• Consistently assumed additional responsibilities and worked extended hours to meet project deadlines.
• Collaborated closely with engineering teams to design custom rigging solutions for unique project requirements.
• Prepared steel components for assembled bent sections and connectors.
• Decreased potential hazards by promptly addressing any identified risks or issues related to rigging activities.
• Contributed to a positive work environment by fostering teamwork and consistently demonstrating a strong work ethic.
• Participated in ongoing training sessions to maintain up-to-date knowledge of industry best practices and safety standards.
• Demonstrated leadership abilities in overseeing small teams of junior riggers during complex lifts on major construction projects.

• Monitored the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Fabricated and welded components to assemble structural forms, such as machinery frames, tanks, pressure vessels, and furnace shells.
• Inspected completed work for conformance to specifications using various instruments.
• Repaired broken or cracked parts using cutting torches and welding equipment.
• Maintained a clean working environment by removing scrap metal from work areas.
• Performed preventative maintenance on welding tools and equipment.
• Gathered required materials for each project in order to meet production deadlines.
• Set up welding machines based on the job at hand.
• Operated manual or semi-automatic flame-cutting equipment to cut metal for fabrication of products.
• Utilized oxyacetylene torches for preheating metals prior to welding or bending them into desired shapes.
• Applied shielded metal arc welding techniques with electrodes in flat, horizontal vertical positions as well as overhead applications.
• Conducted flux core arc welding when applicable.
• Ensured that all welds met code requirements through visual inspection methods such as radiography testing where applicable.
• Cleaned joints before beginning any type of welding process by chipping off slag with a hammer or wire brush.
• Determined appropriate filler metal type based on joint design and material being joined together.
• Adjusted settings on machines such as current level so it matches the specifications outlined in blueprints and drawings.
• Troubleshot problems related to welds including porosity issues caused by improper shielding gas flow rates.
• Set up equipment and welded parts according to welding chart specifications and type.
• Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
• Scraped off excess spatter using portable grinders and arc-cutting equipment.
• Repaired structures by dismantling, reshaping and reassembling metal components with cutting torches and hand tools.
• Prepared broken parts for welding by properly grooving and scarfing surfaces.
• Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
• Operated manual and semi-automatic welding equipment to fuse metal segments together.
• Completed minor torch ups with MIG welders.
• Adjusted gas flow and pressure to create and maintain desired flames.
• Welded components in flat, vertical or overhead positions.
• Welded fabrication materials, continuously checking for safety and quality.
• Improved lifting efficiency with proper selection of rigging equipment for specific tasks.
• Increased workplace safety by conducting regular rigging inspections and equipment maintenance.
• Worked at heights and in confined spaces without difficulty.
• Rigged cables and pipes in configurations to support loads and maintain crew safety.
• Ensured compliance with OSHA regulations by implementing safe work practices at all times during rigging operations.
• Secured safety equipment and always used gear according to requirements.
• Assisted crane operators in making critical decisions regarding lift strategies while maintaining open lines of communication throughout the process.
• Assisted in the development of lift plans, considering factors such as load weights, rigging capacities, and crane positioning.
• Communicated with equipment operators to accomplish smooth and efficient transports.
• Determined correct rigging requirements for equipment based on job specifications and environmental conditions.
• Performed load calculations, ensuring the safe and effective execution of lifting operations.
• Consistently assumed additional responsibilities and worked extended hours to meet project deadlines.
• Decreased potential hazards by promptly addressing any identified risks or issues related to rigging activities.
• Contributed to a positive work environment by fostering teamwork and consistently demonstrating a strong work ethic.
• Participated in ongoing training sessions to maintain up-to-date knowledge of industry best practices and safety standards.

• Fabricated and welded components to assemble structural forms, such as machinery frames, tanks, pressure vessels, and furnace shells.
• Monitored the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Inspected completed work for conformance to specifications using various instruments.
• Repaired broken or cracked parts using cutting torches and welding equipment.
• Maintained a clean working environment by removing scrap metal from work areas.
• Performed preventative maintenance on welding tools and equipment.
• Gathered required materials for each project in order to meet production deadlines.
• Set up welding machines based on the job at hand.
• Operated manual or semi-automatic flame-cutting equipment to cut metal for fabrication of products.
• Utilized oxyacetylene torches for preheating metals prior to welding or bending them into desired shapes.
• Applied shielded metal arc welding techniques with electrodes in flat, horizontal vertical positions as well as overhead applications.
• Conducted flux core arc welding when applicable.
• Trained apprentices in safety procedures and use of tools, equipment used during fabrication, welding operations.
• Cleaned joints before beginning any type of welding process by chipping off slag with a hammer or wire brush.
• Determined appropriate filler metal type based on joint design and material being joined together.
• Adjusted settings on machines such as current level so it matches the specifications outlined in blueprints and drawings.
• Troubleshot problems related to welds including porosity issues caused by improper shielding gas flow rates.
• Read blueprints and drawings and took measurements to plan layout and procedures.
• Set up equipment and welded parts according to welding chart specifications and type.
• Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
• Scraped off excess spatter using portable grinders and arc-cutting equipment.
• Operated manual and semi-automatic welding equipment in vertical, horizontal and overhead positions.
• Repaired structures by dismantling, reshaping and reassembling metal components with cutting torches and hand tools.
• Prepared broken parts for welding by properly grooving and scarfing surfaces.
• Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
• Completed minor torch ups with MIG welders.
• Operated manual and semi-automatic welding equipment to fuse metal segments together.
• Adjusted gas flow and pressure to create and maintain desired flames.
• Heated and dissolved metal parts to obtain molten substance used in welding or extrusion.

• Welded in flat, horizontal, vertical, and overhead positions.
• Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
• Demonstrated versatility in various welding methods including MIG, , Stick, and Flux Core Welding techniques.
• Fabricated shop parts directly from blueprints.

• Achieved consistent weld quality through careful preparation of materials and attention to detail during execution.
• Advanced skills in various welding techniques including MIG, TIG, stick welding, and plasma cutting.
• Improved welding quality by performing precise cuts, bevels, and welds on various metals.
• Maintained superior craftsmanship standards while working under tight deadlines in a fast-paced environment.
• Reduced material waste by accurately measuring and cutting materials for each project.
• Completed complex fabrication projects with precision, ensuring the final product met client specifications.
• Read and followed blueprints and weld diagrams.
• Enhanced workplace safety by adhering to strict safety guidelines and wearing appropriate protective gear.
• Ensured optimal performance from all tools and equipment through routine inspection, cleaning, and maintenance.
• Supported team members by sharing expert knowledge of welding techniques and best practices.
• Resolved weld-related problems by researching and using appropriate repair practices.
• Rigged for heavy lifts according to blueprint requirements.
• Improved lifting efficiency with proper selection of rigging equipment for specific tasks.
• Increased workplace safety by conducting regular rigging inspections and equipment maintenance.
• Worked at heights and in confined spaces without difficulty.
• Rigged cables and pipes in configurations to support loads and maintain crew safety.
• Ensured compliance with OSHA regulations by implementing safe work practices at all times during rigging operations.
• Secured safety equipment and always used gear according to requirements.
• Assisted in the development of lift plans, considering factors such as load weights, rigging capacities, and crane positioning.
• Assisted crane operators in making critical decisions regarding lift strategies while maintaining open lines of communication throughout the process.
• Prepared and erected steel, torque and bolt-up connections.
• Communicated with equipment operators to accomplish smooth and efficient transports.
• Performed load calculations, ensuring the safe and effective execution of lifting operations.
• Enhanced team productivity through clear communication with colleagues regarding job assignments and expectations.
• Determined correct rigging requirements for equipment based on job specifications and environmental conditions.
• Consistently assumed additional responsibilities and worked extended hours to meet project deadlines.
• Decreased potential hazards by promptly addressing any identified risks or issues related to rigging activities.
• Contributed to a positive work environment by fostering teamwork and consistently demonstrating a strong work ethic.

• Welded in flat, horizontal, vertical, and overhead positions.
• Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
• Demonstrated versatility in various welding methods including MIG, TIG, Stick, and Flux Core Welding techniques.
• Fabricated shop parts directly from blueprints.
• Inspected welds and checked critical measurements to meet specifications.
• Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
• Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
• Prepared welding equipment to perform advanced welding work.
• Enhanced welding quality by following precise welding procedures and maintaining proper equipment settings.
• Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
• Utilized blueprints and diagrams to compare finished products against design specifications.
• Reduced workplace accidents through strict compliance with safety regulations and guidelines.
• Increased production efficiency with expert time management skills and adherence to project deadlines.
• Delivered high-quality customer service as a reliable and skilled welder, contributing to positive company reputation and repeat business.
• Assisted in blueprint reading and interpretation for accurate alignment of parts during assembly process.
• Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
• Optimized material usage by accurately measuring and cutting required components prior to welding.
• Collaborated with team members for seamless project execution, improving overall productivity.
• Set up and operated shielded metal arc and gas metal arc welding equipment.
• Chipped off excess weld, slag, and spatter using hand tools.
• Conducted thorough inspections of welds to ensure adherence to industry standards and codes.
• Salvaged and rebuilt parts to achieve cost savings and reduce waste.
• Troubleshot technical issues during the welding process, minimizing downtime on projects.

• Welded in flat, horizontal, vertical, and overhead positions.
• Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
• Demonstrated versatility in various welding methods including MIG, TIG, Stick, and Flux Core Welding techniques.
• Fabricated shop parts directly from blueprints.
• Inspected welds and checked critical measurements to meet specifications.
• Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
• Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
• Prepared welding equipment to perform advanced welding work.
• Enhanced welding quality by following precise welding procedures and maintaining proper equipment settings.
• Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
• Utilized blueprints and diagrams to compare finished products against design specifications.
• Reduced workplace accidents through strict compliance with safety regulations and guidelines.
• Increased production efficiency with expert time management skills and adherence to project deadlines.
• Delivered high-quality customer service as a reliable and skilled welder, contributing to positive company reputation and repeat business.
• Assisted in blueprint reading and interpretation for accurate alignment of parts during assembly process.
• Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
• Optimized material usage by accurately measuring and cutting required components prior to welding.
• Collaborated with team members for seamless project execution, improving overall productivity.
• Set up and operated shielded metal arc and gas metal arc welding equipment.
• Chipped off excess weld, slag, and spatter using hand tools.
• Conducted thorough inspections of welds to ensure adherence to industry standards and codes.
• Developed customized welding techniques for unique materials, optimizing fabrication processes.
• Salvaged and rebuilt parts to achieve cost savings and reduce waste.
• Troubleshot technical issues during the welding process, minimizing downtime on projects.
• Strengthened client relationships by delivering consistent, high-quality workmanship on all projects.
• Mentored junior welders, sharing knowledge to enhance their skill sets and career development.
• Proactively addressed potential hazards or equipment malfunctions before they escalated into serious problems.
• Participated in continuous professional development training sessions to stay current on industry trends and best practices in the field of welding.
• Streamlined work processes through effective communication with supervisors and team members about project requirements and progress updates.
• Managed inventory levels of consumable supplies efficiently ensuring timely replenishment while reducing excess stock.
• Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
• Welded metal components in vertical, overhead and flat positions.
• Maintained safety by wearing protective equipment, staying alert and following procedures.
• Welded various connections with high-quality final results.
• Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.
• Bolted, clamped and tack-welded parts to secure components prior to welding.
• Inspected welds for accuracy and conformance to specifications.
• Avoided warping, shrinkage, and distortion by carefully controlling welding processes.
• Inspected pieces for defects, measured, and checked with straightedges or templates for compliance with specifications.
• Selected and operated shielded metal arc and gas metal arc welding equipment.
• Completed projects safely by closely monitoring conditions when lighting torches and using tools.

Fitting Production pipe ,takeaways for flanges, read Iso's

Welded 6010: 1104 process

Welded 7018: 31.3b process

Filled and capped Flux core,

6G and 6GR process Tig root/hotpass.

6G chill ring

• Welded in flat, horizontal, vertical, and overhead positions.
• Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
• Demonstrated versatility in various welding methods including Stick, and Flux Core Welding.

• Measured and cut metal pieces to correct length and angle to attain proper fit and alignment of pieces.
• Maintained high-quality workmanship through consistent attention to detail and adherence to specifications.
• Maintained clean and organized work area to prevent workplace accidents.
• Read and followed blueprints and weld diagrams.

Welded Structeral components with .045 flux core. Cargo Boxes and and padeyes for cargo to go offshore

Fitted Armored Vehicles to jig specifications, welded with .035 mig wire to Cadillac Gauge specifications.

• Transported inventory items to appropriate locations.
• Maintained a safe work environment by following proper safety protocols and conducting regular inspections.
• Kept storage areas organized, clean, and secure to fully protect company assets.
• Operated Forklifts, Hoists, Mule truck, and Hydraulic Cherry Picker, 15 ton and below.
• 
  

General Marine Construction: rigged piles to drive, buoy chains, docks and Dolphin build and repair.

Using Torch to cut materials, welded with stick and Fluxcore.

• Developed strong teamwork skills by actively collaborating with fellow crew members in various tasks and emergency situations.
• Handled lines during mooring operations efficiently, securing the vessel safely at designated locations.
• Inspected and maintained deck equipment and supplies.
• Performed maintenance tasks such as painting, chipping rust, and greasing equipment to extend the lifespan of onboard assets.

• Met daily production quotas by working effectively within a fast-paced assembly line environment.
• Collaborated with team members to maximize productivity and ensure seamless workflow on the assembly line.
• Stocked and replenished parts used on assembly line to maintain consistent supply and inventory.
• Contributed to a positive work atmosphere, fostering strong relationships with colleagues while maintaining professionalism and focus on tasks at hand.

• Optimized vehicle efficiency with regular preventive maintenance, contributing to mission success.
• Reduced risk of injury or property damage through diligent adherence to proper loading and unloading procedures for heavy vehicles.
• Collaborated with fellow crewmen to develop effective strategies for overcoming obstacles and completing missions efficiently.
• Developed strong communication skills while coordinating with other crew members during high-stress situations.

• Supervised children''s play areas, ensuring a safe space for young guests to enjoy their time at the event.
• Assisted in the setup and teardown of carnival attractions, ensuring timely event start and end times.
• Implemented crowd control measures as needed to maintain orderliness within the grounds during peak hours.
• Managed ticket booths, accurately collecting payments and distributing ride tickets to guests.
• Worked making Cotton Candy, Candy Apples, and popcorn.

Inspected and assembled toys leaving

A blow mold.