Joshua Stalder
Victoria,TX
Overview
13
13
years of professional experience
1
1
Certification
Work History
Tower Technician
Hampton LLC
01.2020 - Current
- Ascended towers utilizing safety gear like full-body harnesses.
- Generated comprehensive reports on project status and progress using software.
- Perform maintenance or repair work on existing tower equipment, using hand or power tools.
- Lift equipment into position, using cranes and rigging tools or equipment, such as gin poles.
- Executed installation of coaxial, power, and ground cables.
- Decommissioned antennas/booms.
- Conducted routine inspections and maintenance on communication towers to ensure operational efficiency.
- Installed, repaired, and upgraded various telecommunications equipment and systems on-site.
- Managed inventory of tools and materials, ensuring availability for scheduled maintenance tasks.
- Assisted in rigging operations for safe hoisting of heavy equipment on towers during installation projects.
- Bolted equipment into place using hand and power tools.
- Installed microwave dishes and antennas.
Electrical Apprentice
Mata electric LLC
10.2019 - 01.2020
- Measure, cut, and bend wire and conduit, using measuring instruments and hand tools.
- Measure materials or objects for installation or assembly.Cut metal components for installation.
- Trace out short circuits in wiring, using test meter.
- Test electrical equipment or systems to ensure proper functioning.
- Strip insulation from wire ends, using wire stripping pliers, and attach wires to terminals for subsequent soldering.
- Install electrical components, equipment, or systems.
- Examine electrical units for loose connections and broken insulation and tighten connections, using hand tools.
- Inspect electrical or electronic systems for defects.
- Construct controllers and panels, using power drills, drill presses, taps, saws and punches.
- Clean work sites.
- Maintain construction tools or equipment.
- Move construction or extraction materials to locations where they are needed.
- Thread conduit ends, connect couplings, and fabricate and secure conduit support brackets, using hand tools.
- Install electrical components, equipment, or systems.
- Repair electrical equipment.
- Solder electrical connections, using soldering iron.
- Install electrical components, equipment, or systems.
- Dig trenches or holes for installation of conduit or supports.
Railroad Laborer
Christensen bridge and rail
04.2019 - 10.2019
- Replace, remove and repair tracks as well as related components
- Align and slide track tie plates and cut rails to specified lengths
- Handle drilling activities for insertion of bolts or joints
- Align and gauge deviations in track surfaces in order to ensure train safety
- Install, repair and replace signs on railroad crossings
- Remove brush and other vegetation from between rails
- Perform lubrication activities on joints, angle bars, and switches
- Perform authorized repairs and document outcomes of all repair activities
- Lay and fix foundations for tracks and replace worn out or rough rail ends
- Rebuild road beds and lay new rail sections
- Operate picks, shovels, bulldozers, and spike driving machines to perform maintenance and repair work on rails
- Repair or replace specific components of the rail track
- Replaced bridge supports and cross braces
Welder/Fabricator
Caterpillar
01.2019 - 04.2019
- Read blueprints and drawings and take or read measurements to plan layout and procedures
- Determine the appropriate welding equipment or method based on requirements
- Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements)
- Operate angle grinders to prepare the parts that must be welded
- Align components using calipers, rulers etc. and clamp pieces
- Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)
- Repair machinery and other components by welding pieces and filling gaps
- Test and inspect welded surfaces and structure to discover flaws
- Maintain equipment in a condition that does not compromise safety
Marine Construction foreman
See level construction
02.2018 - 12.2018
- Dig trenches and backfill holes and compact earth to prepare for new construction.
- Complete tear down of existing structures to prepare for new construction.
- Safely operate heavy machinery such as excavators and backhoes.
- Performed heavy labor such as ditch digging, jetting holes, setting pilings and drilling back systems.
- Dredged trenches and laid drainage pipes.
- Loaded and Unloaded building materials used for construction.
- Provided accurate measurements to support project planning.
- Constructed and repaired bulkheads and docks from start to finish.
- Cut materials to specified sizes for installation using power saws, cut saws, jig saws, and chain saws.
Wind Turbine Climber / Reterm team
Blattner Energy, Inc.
01.2017 - 12.2017
- Re-Powered (maintenance) On wind turbines by installing new components/sensors/instruments and wiring.
- Reconnected wiring in electrical boxes and using point to point diagrams or blueprints .
- Pulled wire, secured, tested and re terminated fiber optic cables.
- Spliced wires by stripping insulation from terminal leads, twisted wires together, and applied tape, butt connectors and ferrules for reterm.
- Installed control and distribution apparatus such as switches, relays, and circuit-breaker panels.
- Connected power cables to equipment, such as electric range or motor, and installs grounding leads.
- Tested continuity of circuit to ensure electrical compatibility and safety of components with testing instruments such as ohmmeter.
- Ran and tested new fiber optic cables.
Marine Technician
Y.E.S. (Yacht Equipment Services)
05.2016 - 12.2016
- Installed, repaired and adjusted electrical and mechanical equipment of inboard or inboard-outboard boat engines.
- Start motors and monitor performance for signs of malfunctioning, such as smoke, excessive vibration, or misfiring.
- Checked all fluid levels and changed if needed.
Instrument Fitter
S&B Engineering and Contractors
01.2016 - 04.2016
- Assembled and installed precise instruments that measure, indicate, transmit, record and control.
- Fitted and assembled instrument parts, checking instruments for accuracy and calibrating to specifications, installing industrial instruments and equipment, dismantled and re-assembled delicate mechanisms or electronic circuits.
- Overhauled instrument systems, checked performance using testing and measuring instruments.
- Assisted fitter with mounting and tubing up various instruments.
Concrete Finisher
JM Davidson
08.2015 - 12.2015
- Cleaned and prepared construction sites by removing debris and possible hazards
- Loaded or unloaded building materials to be used in construction
- Built or took apart bracing, barricades, forms (molds that determine the shape of concrete), scaffolding, and temporary structures
- Dug trenches, backfill holes, or compact earth to prepare for construction
- Operated equipment and machines used in construction, such as concrete mixers
- Helped other craftworkers with their duties
- Followed construction plans and instructions from the people they are working for.
Civil/Structural
KBR
03.2015 - 07.2015
- Cleaned and prepared construction sites by removing debris and possible hazards
- Loaded or unloaded building materials to be used in construction
- Built or took apart bracing, barricades, forms (molds that determine the shape of concrete), scaffolding, and temporary structures
- Dug trenches, backfill holes, or compact earth to prepare for construction
- Operated equipment and machines used in construction, such as concrete mixers
- Helped other craftworkers with their duties
- Followed construction plans and instructions from the people they are working for
- Preserve tools, vehicles, and utensils and keep parts and supplies in order.
- Participated in wire and cable pulls.
Data Entry/Collections
MTR maintenance and turnaround resources
10.2014 - 03.2015
- Travelled to various well sites and substations in North Dakota (bakken) to gather data (model, serial numbers, etc.) from all instruments and major pieces of equipment on well site.
- Assisted P&ID's (pipe & instrument drawings) draftsman with making alterations on P&ID's such as re-numbering instruments and re-drawing pipe in accordance to that specific well site.
- Used the data collected and our reconfigured P&ID's from each site to build an asset register for the client (HESS) using Excel.
Instrument Fitter
Ardent Services
08.2013 - 01.2014
- Assembled and installed precise instruments that measure, indicate, transmit, record and control.
- Fitted and assembled instrument parts, checking instruments for accuracy and calibrating to specifications, installing industrial instruments and equipment, dismantled and re-assembled delicate mechanisms or electronic circuits.
- Overhauled instrument systems, checked performance using testing and measuring instruments.
- Assisted fitter with mounting and tubing up various instruments.
Security Installer
Sandollar Security & Sound
11.2012 - 08.2013
- Installed, maintain, or repair security systems, alarm devices, or related equipment, following blueprints of electrical layouts and building plans.
- Install electrical components, equipment, or systems.
- Mounted and fastened control panels, door and window contacts, sensors, or video cameras and attach electrical and telephone wiring to connect components.
- Install electrical components, equipment, or systems.
- Position equipment using hand tools, power tools, or heavy equipment.
- Demonstrated systems for customers and explain details, such as the causes and consequences of false alarms.
- Explain use of products or services.
- Tested and repair circuits and sensors, following wiring and system specifications.
- Test electrical circuits or components for proper functioning.
- Repair electrical circuits or wiring.
- Fed cables through access holes, roof spaces, or cavity walls to reach fixture outlets, positioning and terminating cables, wires, or strapping.
- Lay cables to connect equipment.
- Examined systems to locate problems, such as loose connections or broken insulation.
- Inspect equipment to locate or identify electrical problems.
- Tested backup batteries, keypad programming, sirens, or other security features to ensure proper functioning or to diagnose malfunctions.
- Inspect safety equipment to ensure proper functioning.
- Drilled holes for wiring in wall studs, joists, ceilings, or floors.
- Determined types of equipment, tools, or materials needed for jobs.
- Mounted raceways and conduits and fasten wires to wood framing, using staplers.
- Run wiring to connect equipment.
- Adjusted sensitivity of units, based on room structures and manufacturers' recommendations, using programming keypads.
Education
Diploma - undefined
Rockport Fulton High School
Rockport, TX01.2010
Skills
- Carpentry
- Outdoor work
- Electrical wiring
- Security System Experience
- Microsoft Excel (1 year)
- Plumbing
- Maintenance
- Forklift Operator (1 year)
- English
- Microsoft Outlook
- Telecommunication
- Electrical experience
- Construction
- Climbing
- Microsoft Office
- Welding
- Hand tools
- Customer service
- Cabling
- Warehouse experience
- Forklift
- Industrial maintenance
- Rigging
- Oil & gas
- Power tools
- Assembly
- Communication skills
- Micrometer
- Commercial construction
- Microsoft Excel
- MIG
- Computer literacy
- Electrical Experience
- Blueprint reading
- OSHA
- Blueprint Reading
- Mechanical Knowledge
- Mechanical knowledge
- Concrete Finishing
- Low voltage
- Plastics extrusion
- Driving
- Leadership
- Sensors
- DSL
- Manufacturing
- Schematics
- Operating systems
- Truck/Trailer (8 years)
Certification
- TWIC
- STCW
- CPR
- OSHA 10
- Driver's License
- Blood borne pathogens
- Competent rigging
- Competent Climber
Timeline
Tower Technician
Hampton LLC
01.2020 - Current
Electrical Apprentice
Mata electric LLC
10.2019 - 01.2020
Railroad Laborer
Christensen bridge and rail
04.2019 - 10.2019
Welder/Fabricator
Caterpillar
01.2019 - 04.2019
Marine Construction foreman
See level construction
02.2018 - 12.2018
Wind Turbine Climber / Reterm team
Blattner Energy, Inc.
01.2017 - 12.2017
Marine Technician
Y.E.S. (Yacht Equipment Services)
05.2016 - 12.2016
Instrument Fitter
S&B Engineering and Contractors
01.2016 - 04.2016
Concrete Finisher
JM Davidson
08.2015 - 12.2015
Civil/Structural
KBR
03.2015 - 07.2015
Data Entry/Collections
MTR maintenance and turnaround resources
10.2014 - 03.2015
Instrument Fitter
Ardent Services
08.2013 - 01.2014
Security Installer
Sandollar Security & Sound
11.2012 - 08.2013
Diploma - undefined
Rockport Fulton High School
Similar Profiles
Gabriella OlindaGabriella Olinda
Scheduler at Hampton Roads Safety Professionals LLCScheduler at Hampton Roads Safety Professionals LLC
Antonio Brown Jr.Antonio Brown Jr.
Truck Driver at J Hampton Trucking LLCTruck Driver at J Hampton Trucking LLC
Deidre HanbachDeidre Hanbach
Adult Nurse Practitioner at Hampton Medical Care, LLCAdult Nurse Practitioner at Hampton Medical Care, LLC
Alejandra LugoAlejandra Lugo
Deli Person at H-E-BDeli Person at H-E-B
Justin SmithJustin Smith
Service and Parts Manager at Southern Field Maintenance 8 YrsService and Parts Manager at Southern Field Maintenance 8 Yrs