Juan M. Lachino
San Juan,TX
Summary
To be an active part of the industry where I will use my abilities to develop an excellent and useful background in solving, identifying, and implementing successful solutions to any problems. At the same time, I will be increasing my abilities and skills while interacting with individuals from different backgrounds and expertise. These positions have provided me with the opportunity to improve my leadership abilities, organization abilities, and to obtain a higher position as well as expanding my knowledge in the I/E field.
Overview
7
7
years of professional experience
1
1
Certification
Work History
I/E Commissioning
Kentech
Port Arthur , TX
2024.01 - Current
- Install electrical wiring and instrumentation, cabling according to design specification.
- Set up and install instrumentation devices, such as pressure, temperature, flow, and level sensors.
- Calibrate instrumentation equipment to ensure accurate readings and proper operation
- Ensured compliance with required performance measures through comprehensive testing and validation of electrical and instrumentation systems.
- Maintain detailed records of installations, tests, calibrations, and any issues encountered and resolved.
I/E Techician
Space X
Boca Chica , TX
2023.08 - 2024.01
- calibrate devices such as temeperture, pressure,flow and level
- work on control valves, making sure theyre calibrated according to desire procees
- Assembly of instrumentation and piping systems according to engineering instructions, offload tanking trailers to tank farm walk down systems to identify future work related to upcoming systems.
- Work with different crafts to maintain launch pad clear for ship takeoff.
Supervisor
McDermott Westlake
Westlake , LA
2023.02 - 2023.09
- Plan work for the day, verify systems, delegate work to crew members, check inventory on material needed for site, communicate with supervisor, coach crew members on the instrumentation side, tray, tubing, routes, and lead workers to a productive date, etc.
- Inspect instruments for any damaged components prior being stalled.
- Put power on instruments and help out with any calibration needed prior being sent to the field
Instrument Fitter Journeyman
ISC Constructors LLC
Baytown , TX
2022.07 - 2023.03
- Plan work for the day, delegate work to crew members, install tray and tubing, fabrication of supports, plan routes for tray and tubing installation, install radius tray different sizes of radius, steam tracing, install tubing and instruments according to instrument details, walk down systems to identify future work related to upcoming systems.
Instrument Fitter Journeyman
McDermott
La Porte , TX
2021.06 - 2022.07
- Plan work for the day, delegate work to others, communicate with crew, assist other as needed
- Installation of fire and gas suppression systems, installation of galvanize pipe, installation of smoke detector alarms, horns, and strobe lights
- Installation of air pipe systems from half inch pipe to four-inch pipe, work with P&ID’S, instrument index, instrument details, air users, work with isometrics, bend tubing, installation of radius tray (various angles)
- Sale off instrument according to details and P&ID’S - IO7 (PT’S, PDT, FT, PG, LG)
- Sale off instruments (check electrical installations and terminations - IO5)
- Sale off valves according to details and P&ID’S
- Sale of pressure tests, instruments/ tubing and verify for leaks
- Pressure test instruments, verifying tube installation is according to details and specification assuring tube has no leaks or damages.
Instrument Fitter Journeyman
TIC
Portland , TX
2020.11 - 2021.06
- Plan work for the day, delegate work to others, communicate with crew, assist other as needed
- Installation of junction boxes, JB boxes, C- Channel stands, Installation of air pipe systems from half inch pipe to four-inch pipe, work with P&ID’S, instrument index, instrument details, air users, work with isometrics, bend tubing, installation of radius tray (various angles)
- Bend tubing, tray, install instruments, fabricate supports, fabricate tubing tray
- Pressure test instruments, verifying tube installation is according to details and specification assuring tube has no leaks or damages.
Instrument Fitter Journeyman
SMITH ANALYTICAL
Dickinson , TX
2020.06 - 2020.10
- Assemble panels for instruments, work on skits, work on analyzer houses
- Work with P&ID’S, instrument details, bend tubing from 1/16in, 1/8in, ¼in, 3/8in, 1/2in, installation of radius tray (various angles)
- Bend tray, install instruments, fabricate supports, fabricate tubing tray
- Fabricate analyzer cabinets at shop from start to completion
- Transport finalized cabinets and install them in perspective job sight.
Instrument Fitter Journeyman
S&B ENGINEERS
Sweeny , TX
2019.08 - 2020.06
- Layout pipe and tubing runs, install slants and instruments, fabricate supports, fabricate tubing tray, install ¼, 3/8, ½ tubing, test air pipe systems and tubing
- Installation of air pipe systems from half inch pipe to four-inch pipe, work with P&ID’S, instrument index, instrument details, air users, work with isometrics, bend tubing, installation of radius tray (various angles)
- Bend tubing, tray, install instruments, fabricate supports, fabricate tubing tray
- Pressure test instruments, verifying tube installation is according to details and specification assuring tube has no leaks or damages.
Instrument Fitter Journeyman
ZACHRY INDUSTRIAL
Freeport , TX
2018.09 - 2019.07
- Layout pipe and tubing runs, install slants and instruments, fabricate supports, fabricate tubing tray, install ¼, 3/8, ½ tubing, test air pipe systems and tubing.
Instrument Fitter
TRIAD ELECTRIC
2018.08 - 2018.09
- Fabricate stands and C channels, install junction boxes, run tubing of 3/8 and ½, install and run dekoron, mount instruments, replace for old instruments.
Instrument Fitter Journeyman
MMR GROUP
2018.06 - 2018.08
- Layout tubing runs, get measurements for hydraulic lines, run tubing tray, fabricate supports, install instruments.
Electrician
US TRADES
2018.02 - 2018.06
- Gather material for task, install and fabricate cable tray, fabricate and install support and stands, install circuit 3/4” and ½”.
Instrument Fitter
35 SERVICES
2017.12 - 2018.02
- Layout tubing system install tray for tubing ¼”,3/8”, and ½”, fabricate supports and stands, mount instruments.
Electrician
MAVERICK TECHNOLOGIES
2017.09 - 2017.12
- Replace Junction boxes, install conduit, pull wire, count instruments on field, terminate panels, remove old wires from control rooms.
Education
Psja North Early College High School
Pharr, TX2014-07
Skills
- Over 8 years of experience in refineries, power plants, LNG facilities, and similar industrial environments.
- Skilled to work with P&ID's, installation drawings, location and wiring diagrams. Able to work with different levels of management and crafts throughout the job site.
- Being bilingual has enhanced my work relationships, improved the work environment and strengthened my communication skills
- Experienced to work with 789 process meter, 475 communicator, PieCal 820, Emerson Trex,and hand pumps.
- Competent to troubleshoot and repair instrumentation and systems; Temperature, pressure, level, and Flow, control valve Actuators, positioners and regulators.
- Able to perform 5 point loop calibrations, sourcing 4 to 20 mA. Can check different types of voltage, perform a continuity check and testing 24 VDC
- Able to meg wires and other equipment.
- Proficient in laying out and installing pipe and tubing runs according to specifications
,detailed drawings and needs for systems. I had the opportunity to work with different sizes of stainless steel tubing ranging from 1/8" to 1" tubing
- Air pipe systems/ Fire Systems. Skilled in installing galvanized and stainless steel piping ranging from 1/2" to 4" pipe. Ensuring optimal performance and reliability. Installed fire and gas suppression systems on MCC including smoke detector alarms, horns, and strobe lights
- Competent to work with different sizes of tray and materials. I have fabricated 2x2 trays(galvanized, stainless steel and aluminum) for instrumentation systems as well as cable trays for electrical systems.
- Pressure testing; Conducting pressure test on instruments and tubing with nitrogen or air. Pressures ranging from 50 psi to 2000 psi. Ensuring leak free installations have been made prior to sell off to clients
- Q/C on LT, FT, PT, PDT, Switches, etc. devices and electrical installations according to specs and data sheets from the site
Certification
- ITT Forward learning
- Lee College/BDI DATALINK
- Industrial Technical Training; Learned how to calibrate instruments for all 4 process variables such as temperature, level, flow, and pressure. Also learned how to stroke valves.
- -Learned how to use equipment such as Fluke 789 to check and source power or check for resistance.
- -Used of PIECAL 820 to simulate and source temperature for TC and RTD devices.
- -Used smart communications such as 475/ Emerson AMS Trex for calibration, trimming and any adjustments that instruments might need.
- -Use of hand pumps to provide/simulate pressure and use of fittings to properly calibrate devices.
- -Learned how to diagnose and verify problems such as damaged instrument elements, incorrect readings, wire damages, and replace and repair transmitters using block and bleed systems.
- Instrument Technician NCCER #20982295
- Instrument Fitter plus #20982295
- Fiber optic technician #20813100
- Fiber optic speacialist/testing #20813100
- Fiber optic specialist/splicing #20813100
- Electrical Apprentice License
- TWIC card
- Basic Plus
Timeline
I/E Commissioning
Kentech
2024.01 - Current
I/E Techician
Space X
2023.08 - 2024.01
Supervisor
McDermott Westlake
2023.02 - 2023.09
Instrument Fitter Journeyman
ISC Constructors LLC
2022.07 - 2023.03
Instrument Fitter Journeyman
McDermott
2021.06 - 2022.07
Instrument Fitter Journeyman
TIC
2020.11 - 2021.06
Instrument Fitter Journeyman
SMITH ANALYTICAL
2020.06 - 2020.10
Instrument Fitter Journeyman
S&B ENGINEERS
2019.08 - 2020.06
Instrument Fitter Journeyman
ZACHRY INDUSTRIAL
2018.09 - 2019.07
Instrument Fitter
TRIAD ELECTRIC
2018.08 - 2018.09
Instrument Fitter Journeyman
MMR GROUP
2018.06 - 2018.08
Electrician
US TRADES
2018.02 - 2018.06
Instrument Fitter
35 SERVICES
2017.12 - 2018.02
Electrician
MAVERICK TECHNOLOGIES
2017.09 - 2017.12
Psja North Early College High School
- ITT Forward learning
- Lee College/BDI DATALINK
- Industrial Technical Training; Learned how to calibrate instruments for all 4 process variables such as temperature, level, flow, and pressure. Also learned how to stroke valves.
- -Learned how to use equipment such as Fluke 789 to check and source power or check for resistance.
- -Used of PIECAL 820 to simulate and source temperature for TC and RTD devices.
- -Used smart communications such as 475/ Emerson AMS Trex for calibration, trimming and any adjustments that instruments might need.
- -Use of hand pumps to provide/simulate pressure and use of fittings to properly calibrate devices.
- -Learned how to diagnose and verify problems such as damaged instrument elements, incorrect readings, wire damages, and replace and repair transmitters using block and bleed systems.
- Instrument Technician NCCER #20982295
- Instrument Fitter plus #20982295
- Fiber optic technician #20813100
- Fiber optic speacialist/testing #20813100
- Fiber optic specialist/splicing #20813100
- Electrical Apprentice License
- TWIC card
- Basic Plus
Similar Profiles
ASHATM MOHAMMEDASHATM MOHAMMED
INSTRUMENT AND CINTROL TECHNICIAN at KENTECH GUYANAINSTRUMENT AND CINTROL TECHNICIAN at KENTECH GUYANA
JANAH DURANTEJANAH DURANTE
Customer Service Representative at Kentech ConsultingCustomer Service Representative at Kentech Consulting
Esdras RiveraEsdras Rivera
Quality Control Inspector at R&d PersonnelQuality Control Inspector at R&d Personnel