Juan Navarro

I have the responsability to ground every equipment on location for the Frac.

• Maintained a clean work environment throughout all job sites where bond and grounding systems were installed or maintained.
• Conducted soil resistivity testing to determine the best locations for ground rods or electrodes for grounding systems.
• Provided technical advice regarding the installation of new bond and grounding systems when requested by customers or clients.
• Ensured proper grounding techniques are used when working near high voltage areas.
• Ensured proper operation of grounding systems to protect personnel from electric shock hazards.
• Trained personnel on proper use of tools required for installation of bonding and grounding equipment.
• Checked for proper grounding of all electrical systems.

• Verified system functionality by testing equipment and connections, identifying and correcting problems.
• Applied company safety policies consistently when performing daily tasks.
• Met and exceeded customer demands through responsive and accurate on-site maintenance.
• Used logging tools to collect data from field, supporting engineer analysis.
• Routinely inspected equipment for preventive and emergency maintenance needs.
• Filled out work orders, repair logs and maintenance plans to document work completed.
• Inspected materials and equipment regularly to check for potential hazards and machine defects.
• Followed safety guidelines and wore protective gear when using power drills, circular saws and other power tools.
• Estimated cost of labor and materials for projects and communicated value to clients.

• Diagnosed and repaired vehicles during road call situations.
• Trained and guided employees on correct methods for performing different repairs and maintenance services.
• Conveyed troubleshooting diagnosis to customer and outlined proposed repair plan and associated costs.
• Conferred with customers to obtain descriptions of vehicle problems and discuss work or future repair requirements.
• Removed old oil, replace filters and added correct amount of new oil.
• Conducted test drives before and after repair services.
• Assessed vehicles or machinery to accurately diagnose and repair issues.
• Attended safety and training meetings to learn techniques to avoid injuries and mishaps.
• Performed troubleshooting and diagnostic procedures to locate source of malfunctions.
• Maintained garage safety protocols to meet regulatory and company expectations.
• Connected electrical wiring to control panels and electric motors.
• Completed standard inspections to assess wear and damage to vehicles.
• Performed maintenance inspections, tune-ups, oil changes and other key services.
• Repaired, replaced and adjusted brakes.

• Observed pressure gauge and moved throttles and levers to control speed of rotary tables and regulate pressure of tools at bottoms of boreholes.
• Picked raw materials to prepare for production activities.
• Met or exceeded target for on-time customer shipments.
• Delivered necessary materials, tools and supplies to production workers to streamline workplace efficiency.
• Organized efficient daily work plans based on oral instructions and written directions to meet challenging objectives.
• Oversaw machine operations to check for malfunctions, broken parts and glitches to prevent work interruptions.
• Maintained clean and hazard-free work areas to attain operational safety and regulatory compliance.
• Assisted with setting up and taking down drilling rig and various equipment.
• Compiled and combined necessary materials before adding to machine hoppers.
• Promoted worksite safety by adhering to OSHA requirements and resolving hazards.
• Removed machine attachments and cleaned up residual waste after project completion.
• Organized finished products and materials for storing, shipping and processing.
• Cleaned and organized work areas and maintained tools and equipment.
• Transported, equipment and materials utilized for assembling drilling tool.
• Marked and tagged identifying information on materials meant for specific projects.
• Used cranes and forklifts to lift heavy materials and move items between workplaces.
• Operated machinery and equipment to complete production processes.
• Recorded measurements for weights of filled containers and dimensions of finished products.
• Protected company inventory by maintaining and organizing storage areas.
• Cleaned tools, work surfaces and storage areas to achieve proper sanitary conditions.
• Obtained proper permits and completed job safety analysis (JSA) prior to beginning each new job.
• Followed workplace safety guidelines by wearing protective clothing and correctly operating heavy machinery.

• Demonstrated best safety practices working at heights and lifting various objects.
• Removed damaged materials and prepared surfaces for optimal installations.
• Connected sections of drill pipe using hand tools and powered wrenches and tongs.
• Maintained open communication with crane and other equipment operators to smoothly transport loads.
• Lubricated, cleaned or repaired machinery or equipment.
• Used bolts and clamps to attach pulleys and fix beams, ceilings and gin pole booms.
• Completed building repairs and maintenance to walkways, sidewalks and landscaping.
• Transported supplies to work sites, removed from trucks and organized for crew use.
• Loaded or unloaded building materials to distribute machinery or tools.
• Trained and evaluated employees to ensure work performance met company standards.
• Read plans, instructions or specifications to determine work activities.
• Operated equipment with strong focus on safety and ground communication.
• Maintained, diagnosed and troubleshoot trucking issues that arose while in field.
• Supervised employees to ensure that cargo shipments were transported accurately to and from specified locations while adhering to safety standards.
• Removed core samples during drilling to determine nature of strata being drilled.
• Controlled traffic passing near, in or around work zones.
• Organized and cleaned work area and tools.
• Operated hand tools, saws, routers and sanding equipment to prepare materials and finish project surfaces.
• Safely and efficiently rigged steel members for connectors and pre-assembled bent sections.
• Cleaned and prepared construction sites by removing debris and possible hazards.
• Assisted with diverse construction challenges to help team and customer.

• Calibrated machines to adhere to quality standards and maintain required productivity levels.
• Troubleshot and diagnosed equipment malfunctions to minimize downtime.
• Rotated among various workstations, performing work necessary to meet production needs.
• Produced quality products by palletizing, packaging and assembling finished items.
• Followed daily preventive maintenance schedule for cleaning and lubricating machinery.
• Measured and weighed items to meet quality standards and prevent waste.
• Used hand trucks and forklifts to unload, load and transport items.
• Taught new employees machine operation techniques and important business procedures.
• Reduced health and safety risks with strict adherence to safety protocols and PPE requirements.
• Assessed and corrected jams in equipment.
• Checked control panel and gauges during equipment operation.
• Prepared for work to be completed by studying assembly instructions, blueprint specifications and part lists.
• Attached identification labels to finished packaged items or stamped lot number and shipping destination information on containers.
• Hand-assembled needed parts with bolts and screws.
• Measured and graded batches of raw materials to feed into production machinery.
• Observed and troubleshot equipment and machines to detect malfunctions and notify appropriate personnel of needed repairs.
• Reported failures, malfunctions or wear issues on equipment to supervisor.
• Looked through work orders to determine type and quantity of materials needed for each production batch.
• Complied with environmental regulations when using, dispensing of, or handling hazardous and non-hazardous materials and waste.
• Retained safe and clean work area in accordance with Good Manufacturing Practices (GMPs).
• Handled various mechanical and technical machinery during manufacturing process.

• Used electronic detectors to locate and repair leaks.
• Worked on job sites and assigned locations, installing and repairing pipes, valves and pumps.
• Observed manufacturer safety instructions when using machinery and work tools.
• Handled various manual operating and maintenance tasks as directed by company's policies and standards.
• Inspected equipment before and after use to increase longevity and maximize safety.
• Dismantled equipment to and cleaned or performed regular maintenance.
• Safely operated forklift and aerial lift to move machinery around floor.
• Cleaned and inspected rig and drilling equipment and implemented practices to prevent equipment rust or corrosion.
• Participated in company safety meetings to learn different ways to alleviate accidents.
• Provided emergency assistance during spills, fires or other accidents.
• Collaborated with others to discuss new opportunities.
• Filled out job or shift report forms for supervisors.
• Maintained schedule of class assignments to meet deadlines.
• Provided excellent service and attention to customers when face-to-face or through phone conversations.
• Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
• Approached customers and engaged in conversation through use of effective interpersonal and people skills.
• Presented clean and sanitized vehicle to customers for utmost satisfaction.