JUAN SALINAS
Beaumont,TX
Overview
1
1
Certification
17
17
years of professional experience
Work History
I/E CSU Supervisor
Rush Resources
Dalton, GA
11.2025 - Current
- Supervise and coordinate electrical crews and subcontractors.
- Plan and assign daily electrical work.
- Oversee high/low voltage installations and equipment.
- Read and interpret electrical drawings, blueprints, and schematics.
- Ensure work follows electrical codes, company procedures and safety requirements.
- L3 Pre-commissioning Pdcs, Generators, Chillers, Rpps, Rops.
- L4 test all electrical equipments, from 1st floor to 4th floor, take readings with pqms and pictures for data records.
- Testing transfer switch from utility line to generators-mcbs-ups-rpps-
- Follow safety policy.
Quality Controls Inspector
Group One Industrial- ENTERPRISE PRODUCTS
Baytown, Texas
06.2025 - 11.2025
- Witness electricians perform continuity, megg cables, to check grounding/ earthing resistance.
- check components to prevent hazards, ensure operational and manage compliance documentation.
- Maintain test reports, inspection log and updates.
- Verify technicians calibrate field instruments, control valves and safety valves
- .Responsible for inspecting, testing and verify that all installations meet strict safety codes as electrical conduit, tubing, cable tray, instruments, switches, panels blue prints and project standards.
Quality Controls Inspector
TF Electrical LLC- Covestro Baytown
Baytown, Texas
01.2025 - 06.2025
- Responsible that all electrical systems, wiring, control panels, and precision instruments meet strict project design plans, safety codes, and performance standards.
- Ensure that E/I installations meet project specifications and quality standards.
- Perform visual & dimensional inspections on material, equipment and construction installation activities, including cable pulling, terminations, conduit runs, lighting systems.
- Issue quality records write non performance reports, maintain checklist and prepare documentation for project hand over.
- Interface with construction teams, engineers and client representatives to resolve quality related issues and ensure project timelines are met.
- Coordinate punchlists walkdown and manage the list of corrective actions to be completed.
Senior I&E Technician/QC Inspector
Rush Resources – Natgasoline
Nederland, Texas
03.2021 - 01.2025
- Performed maintenance, turnaround, and commissioning activities at a methanol production facility
- Supported unit commissioning and recovery following major process events
- Calibrated, repaired, and replaced pressure, level, flow, temperature, and analytical instruments
- Maintained control valves, vibration monitoring systems, gas detectors, analyzers, and transmitters
- Identified control system deviations and implemented corrective actions
- Performed electrical troubleshooting on lighting circuits, panels, motors, and transformers
- Ensured compliance with safety procedures, permits, and housekeeping standards
- Monitored Natgasoline plant equipment and reported operating irregularities.
- Inspected valves, pumps, and lines during natural gas process rounds.
- Replaced defective components or parts as needed.
- 480v motor testing/ ups/ switch gears/ panels.
- Ran tests on newly repaired machinery and equipment to confirm proper functionality.
I&E; Technician – Pre-Turnaround
ISC – Shell Deer Park
05.2019 - 12.2020
- Conducted instrument walkdowns and prepared loop folders for turnaround readiness
- Verified materials, scaffolding, and test equipment availability
- Located instruments, valves, switches, panels, junction boxes, and I/O rooms
- Replaced Rosemount transmitters and repaired valves, solenoids, and regulators
- Calibrated pressure, level, flow, and temperature transmitters
- Performed marshalling cabinet troubleshooting, I/O verification, validation, and simulation for safety shutdown systems
- Coordinated company calendars, meetings, and cross-department schedules.
- Prepared departmental reports, files, and routine correspondence for employer leadership.
- Tracked project tasks, deadlines, and follow-up actions across teams.
- Managed day-to-day operations of the department including scheduling tasks and assigning duties.
I&C; Technician
W-Industries – Steamboat Project
07.2018 - 02.2019
- Performed troubleshooting and regulatory environmental compliance testing
- Executed point-to-point checks, simulation, and PLC functional testing
- Supported startup and commissioning activities
- Performed preventive and corrective maintenance on gas detectors and process instrumentation
- Tested circuits and confirmed safe voltage levels across workplace systems.
- Repaired switches, outlets, breakers, and lighting throughout employer facilities.
- Maintained preventive service logs and inspected electrical assets regularly.
- Read blueprints and wiring diagrams for accurate equipment assembly.
- Installed new electrical wiring and equipment in accordance with local codes and regulations.
I&C; Technician
Thompson Construction – Fiber Industries
Darlington, South Carolina
07.2017 - 05.2018
- Inspected, repaired, and calibrated electrical and instrumentation systems
- Performed bench testing, loop checks, and calibration
- Completed control valve calibration and tuning
- Inspected electrical and instrument equipment for safe operating condition.
- Troubleshot field faults using drawings, wiring diagrams, and test tools.
I&E; Technician
Fluor Corporation – Chevron Chemical Plant
Baytown, Texas
06.2016 - 05.2017
- Supported new construction, commissioning, and startup activities
- Installed, bench tested, and calibrated pressure, level, flow, and temperature instruments
- Provided technical troubleshooting support during startup
- Worked with engineers and vendors on skid-mounted systems and control panels
- Inspected process equipment at Chevron Chemical Plant for safe operating conditions.
- Performed preventive maintenance on Fluor Corporation plant systems and controls.
- Recorded work orders and repair notes in Fluor maintenance logs.
- Maintained records of repairs, calibrations, and tests performed on equipment.
I&E; Technician
Rabalais Constructors – Marathon Refinery
Corpus Christi, Texas
11.2015 - 04.2016
- Investigated equipment failures and identified root causes
- Repaired switches, pushbuttons, indicator lights, solenoids, and control valves
- Performed point-to-point checks and instrument simulation using HART 475 and Fluke 789
- Maintained records of repairs, calibrations, and tests performed on equipment.
- Followed safety practices to safeguard against injury and damage to property.
- Conducted preventive maintenance procedures according to established schedules.
- Adjusted, connected, or disconnected wiring, piping and tubing to complete repairs and installations.
- Ran tests on newly repaired machinery and equipment to confirm proper functionality.
I&C; Technician
MMR Group – Gas Plant
04.2014 - 11.2015
- Mounted, calibrated, and maintained field instrumentation.
- Supported preventive maintenance schedules.
- Inspected electrical and instrument equipment for safe operating condition.
- Performed troubleshooting and loop checks.
- Troubleshot field faults using drawings, wiring diagrams, and test tools.
- Installed control cables, sensors, and terminal connections across project areas.
- Maintained records of repairs, calibrations, and tests performed on equipment.
Electrician / Foreman
Pyramid Electric
02.2010 - 03.2014
- Advanced from helper to foreman
- Installed conduit, receptacles, lighting, and underground systems
- Performed terminations on panels, junction boxes, motors, and transformers up to 480V
- Assisted with instrument installation, tubing runs, gas detectors, horns, and emergency lighting
- Configured and verified HART-enabled devices and instrument ranges
Education
Associate of Arts - Instrumentation Technology Associate
San Jacinto College
Pasadena, TX08-2016
NCCER Electrical Certification
abc contractors
Osha 30 safety certification
Osha
Nccer Instrumentation Certification
San Jacinto College
Pasadena, TXNFPA 70E
360 Training
Skills
- Preventive and corrective maintenance
- Safety compliance
- Instrument calibration
- PLC testing
- Loop checks
- Preventive maintenance
- Blueprints interpretation
- High voltage systems
- Commissioning testing
- Electrical supervision
Certification
- NCCER Instrumentation Certification
- NCCER Electrical Certification
- OSHA 30
- Basic Plus
- TWIC Card
- Instrumentation Technology Program
Timeline
I/E CSU Supervisor
Rush Resources
11.2025 - Current
Quality Controls Inspector
Group One Industrial- ENTERPRISE PRODUCTS
06.2025 - 11.2025
Quality Controls Inspector
TF Electrical LLC- Covestro Baytown
01.2025 - 06.2025
Senior I&E Technician/QC Inspector
Rush Resources – Natgasoline
03.2021 - 01.2025
I&E; Technician – Pre-Turnaround
ISC – Shell Deer Park
05.2019 - 12.2020
I&C; Technician
W-Industries – Steamboat Project
07.2018 - 02.2019
I&C; Technician
Thompson Construction – Fiber Industries
07.2017 - 05.2018
I&E; Technician
Fluor Corporation – Chevron Chemical Plant
06.2016 - 05.2017
I&E; Technician
Rabalais Constructors – Marathon Refinery
11.2015 - 04.2016
I&C; Technician
MMR Group – Gas Plant
04.2014 - 11.2015
Electrician / Foreman
Pyramid Electric
02.2010 - 03.2014
Associate of Arts - Instrumentation Technology Associate
San Jacinto College
NCCER Electrical Certification
abc contractors
Osha 30 safety certification
Osha
Nccer Instrumentation Certification
San Jacinto College
NFPA 70E
360 Training