Juan Ramon De La Fuente

• Installed plumbing systems in commercial buildings. such as condensation drain system for several condensers using copper propress fittings.
• Operated hand and power tools for pipe fitting and repair tasks.
• Collaborated with team members to complete plumbing installations, enhancing project timelines and teamwork.
• Enhanced piping system integrity by installing valves, hangers, and supports, facilitating effective fluid management.
• Cut openings in walls to access existing plumbing lines for repair or replacement.
• Executed pipe fabrication, installation, and fitting according to specifications, ensuring compliance with industry standards.
• Cut openings in walls and floors to accommodate pipe and pipe fittings.

Supported other experienced plumbers with troubleshooting plumbing issues on-site.

• Followed safety protocols during all plumbing activities to ensure a safe work environment.
• Maintained organized tools and clean workspaces to promote safety and efficiency on job sites.
• Collaborated with team members to complete plumbing installations efficiently.
• Participated in training sessions to enhance plumbing and pipefitting knowledge skills regularly.
• Installed gas piping systems according to local codes.
• Constructed intricate components through soldering and pipe threading with specialized tools.
• Organized jobs from start to finish by delegating daily job duties and assessing completed tasks.
• Trained apprentices on installation methods and safety procedures to ensure compliance and skill development.
• Performed pipe fabrication, installation, and fitting according to proper specifications.
• Collaborated with contractors on large-scale projects to coordinate plumbing installations across multiple trades.
• Tested plumbing systems to locate leaks, malfunctions and repair needs.
• Located and repaired leaks in water supply lines.
• Cut grooved and threaded carbon steel, galvanized and stainless-steel pipe for weld water supply systems. worked alongside 10 other journeyman fitters/plumbers and operators to hang 8"-10"-12" carbon steel pipe on hangers previously installed.
• communication was critical in order to complete the task. organized pre-task plans and explained the procedure for installation. created safety plans primarily focused on getting the job done efficiently and safely.

Created detailed isometric drawings and transferred data to Revit for modeling, coordinating data between AutoCAD, Navisworks, and Revit to identify and resolve clashes between existing and new designs.

• Collaborated with project teams to ensure design accuracy and compliance.
• Updated and maintained BIM software, ensuring optimal performance and reliability for project execution.
• Coordinated with engineers to integrate systems into building models.
• Reviewed design documents to identify potential conflicts and issues.
• Assisted in training junior team members on BIM processes and tools.
• Implemented model standards to enhance project consistency and quality.
• Supported project managers by providing accurate model updates and revisions.
• Created 3D models of piping systems using Revit software.
• Updated existing 3D models based on changes made by other disciplines or due to clashes detected in coordination meetings.
• Created advanced views, schedules, sheets, and annotations from existing model elements.
• Prepared shop drawings from BIM models for fabrication purposes.
• Maintained accurate documentation throughout each phase of a project including change orders and document revisions.
• Developed clash detection reports to identify potential problems during the design process.
• Developed BIM project plans and collaborated with the design team to ensure accuracy in model development.
• Imported point cloud data into Revit for use in creating as-built models.
• Assisted in developing detailed drawings, specifications, and construction documents for projects.
• Coordinated with other trades for proper integration of their designs into the overall model.
• Performed quality control checks on all BIM models prior to submission.
• Participated in weekly coordination meetings with other disciplines to resolve conflicts within the model.
• Conducted regular reviews of model components to ensure accuracy and completeness.
• Provided technical support to designers during the modeling process.
• Resolved any discrepancies between the physical environment and the digital model through site visits or remote collaboration with field personnel.
• Produced precise drawings using CAD software and drafting tools to support construction and installation projects.
• Drafted plans and detailed drawings for piping systems, installations and construction projects.
• Analyzed design specifications and necessary materials to determine project requirements.
• Reviewed drawings, specifications, and engineering data to verify conformance to design concepts.

• Shut off steam or other gases or liquids from pipes to conduct maintenance.
• Welded piping using specialized techniques and computer-assisted fabrication.
• Performed rigging and forklift operations to maneuver parts and machinery.
• Established sequence of installations around obstructions.
• Modified piping systems with task-specific tools to complete preventive maintenance.
• Recommended measures that enhanced maintenance methods and improved equipment performance.
• Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
• Completed walk-throughs of completed systems to verify code adherence.
• Cut openings in walls and floors to accommodate pipe and pipe fittings.
• Studied building plans and other materials to determine work aids required and proper installation sequences.
• Studied blueprints and inspected structures to assess material and equipment needs, pipe installation sequence and installation around possible obstructions.
• Located and repaired leaks in water supply lines.
• Tested plumbing systems to locate leaks, malfunctions and repair needs.
• Installed and extended underground storm, sanitation, and water piping systems to connect fixtures and plumbing.
• Identified and located required tools prior to starting each project.
• Adhered to safety procedures to reduce risk of injury.
• Assisted team by inspecting pipes and piping systems to assess quality and condition.
• Estimated time and materials for projects to ensure efficient resource allocation.
• Troubleshooted plumbing issues using specialized tools including pipe wrenches, saws, drills, test gauges.
• Performed maintenance on water heaters and other equipment such as toilets, sinks, showers, garbage disposals, sump pumps, and septic tanks.
• Documented job progress daily to maintain accurate records and streamline project tracking.
• Ensured compliance with all applicable laws and regulations related to plumbing work.
• Worked closely with contractors on large-scale construction projects involving multiple tradespeople.
• Performed pipe fabrication, installation, and fitting according to proper specifications.
• Assisted in training apprentices in proper installation methods and safety procedures.
• Installed and maintained plumbing systems to meet customer requirements.
• Directed workflow and ensured proper task completion throughout projects.
• Repaired, replaced, and installed pipes, fixtures, and valves in residential and commercial buildings.
• Assembled complex components that require soldering techniques or threading pipes together using special tools.
• Installed gas piping systems according to local codes.
• Installed essential components such as valves, hangars, supports, and flanges to enhance piping system integrity.
• Participated in training sessions to enhance plumbing knowledge and skills regularly.
• Collaborated with team members to complete plumbing installations efficiently.
• Maintained cleanliness and organization of tools and workspaces on job sites.
• Followed safety protocols during all plumbing activities to ensure a safe work environment.
• Supported experienced plumbers with troubleshooting plumbing issues on-site.
• Operated hand and power tools for pipe fitting and repair tasks.

• Collaborated with construction teams to integrate plumbing systems seamlessly into projects.
• Installed and repaired piping systems for commercial and residential properties.
• Executed preventive maintenance on plumbing systems, minimizing downtime and enhancing reliability.
• Diagnosed plumbing issues and implemented timely solutions to restore functionality quickly.
• Utilized specialized tools for pipe fitting and installation tasks effectively.
• Maintained compliance with local plumbing codes and safety regulations.
• Diagnosed problems with plumbing systems by listening for leaks; inspecting exposed pipes; testing pressure gauges; running diagnostic tests.
• Tested pipe systems for proper functioning after installation or repair.
• Read blueprints to determine layout of plumbing systems; identify required materials; measure distances between cutting points; calculate angles for connections.
• Performed pipe fabrication, installation, and fitting according to proper specifications.
• Installed and extended underground storm, sanitation, and water piping systems to connect fixtures and plumbing.

• Supervised plumbing installation and repair projects across residential and commercial sites.
• Coordinated team schedules to optimize resource allocation and meet project deadlines.
• Conducted safety inspections to uphold compliance with industry standards and ensure crew safety.
• Trained junior plumbers on best practices and proper tool usage for efficiency.
• Managed inventory of plumbing supplies and tools for effective job execution.
• Collaborated with contractors to plan plumbing layouts for new construction projects.
• Ensured compliance with local building codes during the installation process.
• Developed project schedules based on established timelines for completion of tasks.
• Supervised plumbing activities of workers in installation, maintenance, and repair of pipes and fixtures for heating, water, and drainage systems.
• Conducted regular safety meetings with crew members to ensure that all safety protocols are being followed.
• Coordinated emergency repairs when required due to unexpected issues arising during projects.
• Reviewed blueprints before starting each project to determine best approach for successful completion.

installed gas systems for new home construction, ensuring compliance with safety standards.

• reviewed and updated gas iso drawings to align with architectural changes.
• installed underground waste systems, topout systems, drain waste, vents, and domestic water systems using copper and upanor materials.

• Installed fire sprinkler systems in residential and commercial buildings.
• Inspected and maintained fire suppression systems to ensure compliance with safety regulations.
• Operated tools such as pipe cutters and threading machines safely.
• reviewed blueprints to determine system specifications and requirements.
• Conducted pressure tests to ensure system integrity and performance.
• Coordinated inspection schedules and approvals with local fire inspectors to facilitate timely project completion.
• Installed fire sprinkler systems in commercial and residential buildings according to blueprints and specifications.
• Tested newly installed fire sprinkler systems to verify proper operation and adequate water flow.

• Installed air conditioning units in residential and commercial properties, ensuring optimal climate control and comfort.
• Measured, cut, hung, and insulated air ducting to promote efficient airflow and system performance.
• Constructed ductwork for new air conditioning units according to plans and specifications.
• Drilled holes in walls and ceilings for ventilation pipe installation, facilitating effective air distribution.
• Brazed copper tubing to ensure efficient refrigerant flow between room units and roof-mounted condensers.

• Restocked merchandise on sales floor to ensure organized displays and enhance customer shopping experience.
• Operated cash register efficiently and accurately, processed payments by cash, check, credit card, gift card or automatic debit.
• Restocked shelves with merchandise to support inventory levels and product availability.
• Assisted customers in finding specific products, answered questions, and provided product recommendations to improve service quality.

• Installed fire sprinkler systems in hospital buildings.
• coordinated material orders with foreman and installed diesel pumps to maintain head pressure transfer.
• silver-soldered copper piping from 1/2" to 6" to uphold system integrity.

• Installed fire sprinkler systems in residential and commercial buildings.
• Tested newly installed fire sprinkler systems for proper operation and water flow.
• Supported design of fire sprinkler systems to ensure accurate measurements for installation.
• Communicated effectively with colleagues about project progress and any changes needed along the way.

worked with family members, gaining hands-on experience in fire sprinkler systems.

• developed a strong work ethic, reflecting high standards in all tasks.
• learned mutual respect and collaboration, contributing to team success.
• Fostered a collaborative environment by prioritizing teamwork, respect, and effective communication.