Summary
Overview
Work History
Education
Skills
Affiliations
Certification
Timeline
Generic
Justin Harrell

Justin Harrell

Columbus

Summary

Detail-oriented professional with 8 years of experience and a proven knowledge of inspections, safety assessments and repair actions. Aiming to leverage my skills to successfully fill the HVAC/R Technician role at your company.

Overview

11
11
years of professional experience
1
1
Certification

Work History

HVAC-R Service Technician

TRG
02.2023 - Current
  • Assembled air ducts, pipes, discharge valves and flues to central heating and cooling equipment.
  • Increased longevity of HVAC systems by performing preventive maintenance.
  • Discussed heating and cooling system malfunctions with customers to isolate problems and verify corrected malfunctions.
  • Installed bypass dampers, low voltage wiring, smoke detectors, split systems, and package units in commercial or residential buildings.
  • Responded to emergency HVAC service requests promptly, finding swift resolutions.
  • Troubleshot and diagnosed issues with HVAC and refrigeration units.
  • Repaired and replaced faulty motors, blowers, switches and compressor units.

Refrigeration Service Technician

CBRE
03.2022 - 02.2023
  • Manage 8 Chevron Locations day to day for HVAC/R.
  • Assisted Chief Engineer by remotely managing 70 Chevron gas stations through DannFoss remote system.
  • Supervised and instructed assistants.
  • Drilled holes in floors, walls and roof to install equipment, using power saws and drills.
  • Recorded and reported time, materials, faults, deficiencies and other unusual occurrences on work orders.
  • Repaired defective joints and leaks.
  • Measured, cut, threaded, or bent pipe or tubing, using pipe fitter's tools.
  • Complied with all applicable standards, policies and procedures, such as safety procedures and maintenance of clean work area
  • Recommended, developed and performed preventive and general maintenance procedures, such as cleaning, power-washing, and vacuuming equipment, oiling parts and changing filters
  • Tested electrical circuits or components for continuity, using electrical test equipment.
  • Picked up, deliver and installed materials and supplies needed to maintain equipment in good working condition
  • Connected heating and air conditioning equipment to fuel, water and refrigerant source to form complete circuit
  • Layed out and connected electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools
  • Installed expansion and control valves, used acetylene torches and wrenches.
  • Performed mechanical overhauls and refrigerant reclaimed.
  • Installed auxiliary components to heating and cooling equipment, such as expansion and discharge valves, air ducts, pipes, blowers, dampers, flues and stokers
  • Kept records of repairs and replacements made and causes of malfunctions.

Refrigeration Technician

JUSTIN HARRELL, HVAC-RSERVICETECHNICIAN, CBRE
03.2021 - 03.2022
  • Installed, connected, and adjusted thermostats, humidistats and timers.
  • Inspected and tested systems to verify system compliance with plans and specifications and to detect and locate malfunctions
  • Discussed heating and cooling system malfunctions with users to isolate problems and to verify that repairs corrected malfunctions
  • Scheduled work with customers and initiated work orders, house requisitions and orders from stock.
  • Replaced defective equipment, components and wiring.
  • Adjusted system controls to settings recommended by manufacturer to balance system.
  • Tested pipes, lines, components and connections for leaks.
  • Repaired or serviced heating, ventilating and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts and refilling non-toxic refrigerants
  • Created Training Videos on a Go Pro to promote effective work in new employees.
  • Managed a total of 8 Walmart locations.
  • Tested electrical circuits or components for continuity, using electrical test equipment.
  • Inspected and tested systems to verify system compliance with plans and specifications and to detect and locate malfunctions
  • Replaced defective equipment, components and wiring.
  • Repaired defective joints and leaks.
  • Recommended, developed and performed preventive and general maintenance procedures, such as cleaning, power-washing, and vacuuming equipment, oiling parts and changing filters
  • Installed, connected, and adjusted thermostats, humidistats and timers.
  • Studied blueprints, design specifications, or manufacturers' recommendations to ascertain configuration of heating or cooling equipment components and proper installation of components
  • Complied with all applicable standards, policies and procedures, such as safety procedures and maintenance of clean work area
  • Discussed heating and cooling system malfunctions with users to isolate problems and to verify that repairs corrected malfunctions
  • Installed auxiliary components to heating and cooling equipment, such as expansion and discharge valves, air ducts, pipes, blowers, dampers, flues and stokers
  • Drilled holes in floors, walls and roof to install equipment, using power saws and drills.
  • Measured, cut, threaded, or bent pipe or tubing, using pipe fitter's tools.
  • Lifted and aligned components into position, using hoist and block and tackle.
  • Installed expansion and control valves, used acetylene torches and wrenches.
  • Picked up, deliver and installed materials and supplies needed to maintain equipment in good working condition
  • Performed mechanical overhauls and refrigerant reclaimed.
  • Recorded and reported time, materials, faults, deficiencies and other unusual occurrences on work orders.
  • Mounted compressor, condenser and other components in specified locations on frames, using hand tools and acetylene welding equipment
  • Kept records of repairs and replacements made and causes of malfunctions.

Refrigeration Service Manager

CALWEST Refrigeration
03.2020 - 03.2021

Refrigeration Lead Service Technician

PMC Southwest
02.2016 - 03.2020
  • Adjusted system controls to settings recommended by manufacturer to balance system.
  • Connected heating and air conditioning equipment to fuel, water and refrigerant source to form complete circuit
  • Layed out and connected electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools
  • Scheduled work with customers and initiated work orders, house requisitions and orders from stock.
  • Repaired or serviced heating, ventilating and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts and refilling non-toxic refrigerants
  • Tested pipes, lines, components and connections for leaks.
  • Worked hands on with DannFoss Controllers to create refrigeration data bases throughout commissaries.
  • Oversaw hiring and training procedures for new personnel to confirm smooth onboarding.
  • Supervised daily office operations and addressed any workplace inconsistencies or issues.
  • Provided and attended workplace training on improving customer service practices.
  • Implemented corrective plans to improve customer service experience.
  • Upheld established policies and procedures for maximum workplace efficiency.
  • Evaluated employee performance.
  • Communicated with customers in person and by phone to promote issue resolution and good customer service
  • Created and disseminated employee schedules to keep shifts properly staffed.
  • Delegated tasks to employees to effectively complete projects.
  • Monitored progress of ongoing projects and determined necessary steps.
  • Represented business in marketplace and developed relationships with key accounts to promote and market business
  • Implemented and developed operational standards and procedures.
  • Conducted bi-weekly team meetings to create business plans to drive for success .
  • Maintained frequent interaction with senior management to measure goal achievement and determine areas of improvement
  • Addressed and resolved client or customer inquiries to foster superior standards of service.
  • Led and directed team members on effective methods, operations and procedures
  • Developed training modules and documentation to train staff.
  • Created weekly schedules based on predicted staffing needs, budgets and employee requests.
  • Oversaw personnel to maintain adequate staffing and minimize overtime.
  • Supervised and instructed a team of 12 technicians within 118 varies supermarket locations.
  • Repaired defective joints and leaks.
  • Connected heating and air conditioning equipment to fuel, water and refrigerant source to form complete circuit.

Assistant Manager

O'Reilly Auto Parts
11.2012 - 02.2016
  • Adjusted system controls to settings recommended by manufacturer to balance system.
  • Drilled holes in floors, walls and roof to install equipment, using power saws and drills.
  • Kept records of repairs and replacements made and causes of malfunctions.
  • Measured, cut, threaded, or bent pipe or tubing, using pipe fitter's tools.
  • Recorded and reported time, materials, faults, deficiencies and other unusual occurrences on work orders.
  • Installed expansion and control valves, used acetylene torches and wrenches.
  • Complied with all applicable standards, policies and procedures, such as safety procedures and maintenance of clean work area
  • Studied blueprints, design specifications, or manufacturers' recommendations to ascertain configuration of heating or cooling equipment components and proper installation of components
  • Lifted and aligned components into position, using hoist and block and tackle.
  • Mounted compressor, condenser and other components in specified locations on frames, using hand tools and acetylene welding equipment
  • Layed out and connected electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools
  • Picked up, deliver and installed materials and supplies needed to maintain equipment in good working condition
  • Replaced defective equipment, components and wiring.
  • Tested electrical circuits or components for continuity, using electrical test equipment.
  • Performed mechanical overhauls and refrigerant reclaimed.
  • Discussed heating and cooling system malfunctions with users to isolate problems and to verify that repairs corrected malfunctions
  • Installed, connected, and adjusted thermostats, humidistats and timers.
  • Inspected and tested systems to verify system compliance with plans and specifications and to detect and locate malfunctions
  • Installed auxiliary components to heating and cooling equipment, such as expansion and discharge valves, air ducts, pipes, blowers, dampers, flues and stokers
  • Recommended, developed and performed preventive and general maintenance procedures, such as cleaning, power-washing, and vacuuming equipment, oiling parts and changing filters
  • Scheduled work with customers and initiated work orders, house requisitions and orders from stock.
  • Installed dehumidifiers and related equipment for spaces that required cool, dry air to operate efficiently, such as computer rooms
  • Repaired or serviced heating, ventilating and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts and refilling non-toxic refrigerants
  • Tested pipes, lines, components and connections for leaks.
  • Maintained hands-on knowledge of job roles and regularly stepped in to perform business duties.
  • Coordinated employee schedules according to staff availability and processed time-off requests.
  • Tracked store inventories and replenished products according to demand.
  • Liaised between managers and employees, communicating concerns and expectations to appropriate parties
  • Resolved customer complaints and handled refunds and returns to promote satisfaction.
  • Scheduled equipment cleanings, maintenance and repairs and ordered new equipment and tools.
  • Communicated with clients to address questions, concerns and needs and provide quality customer service.
  • Oversaw personnel to maintain adequate staffing and minimize overtime.

Education

High School Diploma -

Arlington High School

Skills

  • Refrigeration/HVAC controls (Danfoss, CPC, Novar)
  • Self Contained Coolers and Freezers
  • Electrical System Replacement
  • Safety Awareness
  • Variable Frequency Drives (VFDs)
  • Repair Procedures
  • HVAC and Refrigeration Systems
  • Predictive and Preventive Maintenance
  • Equipment Knowledge
  • Refrigeration Maintenance
  • Piping and Brazing
  • Microsoft Knowledge

Affiliations

Universal EPA #1088389033810 API #WS-914194F4

Certification

  • Licensed Universal EPA

Timeline

HVAC-R Service Technician

TRG
02.2023 - Current

Refrigeration Service Technician

CBRE
03.2022 - 02.2023

Refrigeration Technician

JUSTIN HARRELL, HVAC-RSERVICETECHNICIAN, CBRE
03.2021 - 03.2022

Refrigeration Service Manager

CALWEST Refrigeration
03.2020 - 03.2021

Refrigeration Lead Service Technician

PMC Southwest
02.2016 - 03.2020

Assistant Manager

O'Reilly Auto Parts
11.2012 - 02.2016

High School Diploma -

Arlington High School

Similar Profiles

CREATE PROFILE
Justin Harrell