Justin Matthews

• Worked the outage and Assisted training with various people to allow qualifications to be given to certain individuals for mechanical responsibilities.
• Over saw the entire Intake and walked around and looked for hazards pertaining to the work.
• I was in charge of looking for hazards and mitigating
• Overseen filled out JSA and done audits regularly.
• Overseen confined space briefs and done audits to better the program
• I done monthly inspections of harnesses and mandated workers to do it before each use.
• Took back daily progress and activities to the rest of the plant at meetings on trends and the comings and goings .

• Worked on Feedwater pumps and we did a whole exchange including new shaft,impeller and done alignment.
• Replaced Reactor coolant pump seals in two different pumps which insisted on removing two of the motors and replacing all new seals.
• Used hoisting and rigging equipment to move heavy machinery and equipment
• Replaced defective parts of machines and adjusted clearances and alignment of moving parts
• Made repairs and modified equipment by welding, soldering and brazing to avoid production delays
• Inspected and examined all machinery and equipment to detect malfunctions or irregularities
• My job was to oversee and make sure all safety was priority and conducted audits and took measures and proceeded to coordinate with other safety coordinators about trends.

• Worked the outage and Assisted training with various people to allow qualifications to be given to certain individuals for mechanical responsibilities.
• Over saw the entire Intake and walked around and looked for hazards pertaining to the work.
• I was in charge of looking for hazards and mitigating
• Overseen filled out JSA and done audits regularly.
• Overseen confined space briefs and done audits to better the program
• I done monthly inspections of harnesses and mandated workers to do it before each use.
• Took back daily progress and activities to the rest of the plant at meetings on trends and the comings and goings .

• Worked the outage and Assisted training with various people to allow qualifications to be given to certain individuals for mechanical responsibilities.
• Over saw the entire Intake and walked around and looked for hazards pertaining to the work.
• I was in charge of looking for hazards and mitigating
• Overseen filled out JSA and done audits regularly.
• Overseen confined space briefs and done audits to better the program
• I done monthly inspections of harnesses and mandated workers to do it before each use.
• Took back daily progress and activities to the rest of the plant at meetings on trends and the comings and goings .

• Worked the outage and Assisted training with various people to allow qualifications to be given to certain individuals for mechanical responsibilities.
• Over saw the entire Intake and walked around and looked for hazards pertaining to the work.
• I was in charge of looking for hazards and mitigating
• Overseen filled out JSA and done audits regularly.
• Overseen confined space briefs and done audits to better the program
• I done monthly inspections of harnesses and mandated workers to do it before each use.
• Took back daily progress and activities to the rest of the plant at meetings on trends and the comings and goings .
• Assisted with multiple pumps being removed with rigging being inspected.

• We rebuilt the intake screen structure on unit 1 of the intake facility..
• I also rebuilt the ASW pump which supplies the RHR with water. Which is Safety related. Aligned it with Dial indicators on the rim and face and calculated the sag.
• Replaced gland housing and packing on the ASW pump and torqued it down to 750 foot pounds
• All bolts required torquing and never seize on all components.

Rebuilding Cw pump and seals along with doing maintenance and rebuilding certain parts of the intake traveling screens.

Rebuilding the ASW pump as it's one of the most critical pumps of the plant and is safety related.

Rigging up the ICW heat exchanger which cools the water to the CW pump seals. And cleaning the tubes on it along with rebuilding what is necessary.

Make runs up to the plant and perform work in Containment that needs to be done.

We rebuilt the intake screen structure on unit 1 of the intake facility..

I also rebuilt the ASW pump which supplies the RHR with water. Which is Safety related. Aligned it with Dial indicators on the rim and face and calculated the sag.

Replaced gland housing and packing on the ASW pump and torqued it down to 750 foot pounds

All bolts required torquing and never seize on all components.

• Used hoisting and rigging equipment to move heavy machinery and equipment
• Replaced defective parts of machines and adjusted clearances and alignment of moving parts
• Made repairs and modified equipment by welding, soldering and brazing to avoid production delays
• Inspected and examined all machinery and equipment to detect malfunctions or irregularities
• Aligned and leveled machines using precision measuring instruments to avoid unnecessary wear and tear
• Installed stationary industrial machinery and mechanical equipment according to layout plans
• Disassembled machinery parts and categorized properly before moving to storage
• Operated machine tools to fabricate parts during overhaul, maintenance, or setup of machineries

• Rebuilt a Feedwater pump in the unit one Turbine building out at Plant Vogtle Nuclear Plant.
• Removed all internal elements and replaced with new along with bearings and associated piping.
• Aligned pump to turbine using optalign laser.
• Hooked up all piping associated.

• Worked the outage and Assisted training with various people to allow qualifications to be given to certain individuals for mechanical responsibilities.
• Over saw the entire Intake and walked around and looked for hazards pertaining to the work.
• I was in charge of looking for hazards and mitigating
• Overseen hilled out JSA and done audits regularly.
• Overseen confined space briefs and done audits to better the program
• I done monthly inspections of harnesses and mandated workers to do it before each use.
• Took back daily progress and activities to the rest of the plant at meetings on trends and the comings and goings .

• Worked the outage and Assisted training with various people to allow qualifications to be given to certain individuals for mechanical responsibilities.
• Over saw the entire Intake and walked around and looked for hazards pertaining to the work.
• I was in charge of looking for hazards and mitigating
• Overseen hilled out JSA and done audits regularly.
• Overseen confined space briefs and done audits to better the program
• I done monthly inspections of harnesses and mandated workers to do it before each use.
• Took back daily progress and activities to the rest of the plant at meetings on trends and the comings and goings .

I worked 10 outages out at Palo Verde Nuclear Generating Station.

Every outage I rebuild CW Pumps out at the intake part of the plant.

We unbolt the the pump from the flange of the butterfly valve which controls the water going to the condenser. Then we rig it up and fly it out into the stand and we unbolt the wet end from the dry end.

Once that is done we will fly the shaft out and replace with all new parts and then we align the motor to the pump using dial indicators made by Starret.

I've also worked on the Cooling Towers at Palo Verde for years and doing maintenance on all the fans there.

• Used hoisting and rigging equipment to move heavy machinery and equipment
• Replaced defective parts of machines and adjusted clearances and alignment of moving parts
• Made repairs and modified equipment by welding, soldering and brazing to avoid production delays
• Inspected and examined all machinery and equipment to detect malfunctions or irregularities
• Adhered to all workplace safety policies, regulations and compliances
• Aligned and leveled machines using precision measuring instruments to avoid unnecessary wear and tear

Turkey Point Nuclear plant

We rebuild both units Intake structure from old worn out style to a new state of the art style.

We used cutting torches and grinders to demo the old out and we replaced with new chain and sprocket driven intake screens which filter the water heading to the condenser.