Justin Quamme
Zumbrota,MN
Summary
Resourceful Project Specialist known for high attention to detail! Specialize in risk assessment, and stakeholder communication. Excel in leadership, time management, and adaptability to meet project goals and deadlines. Bring skills to effectively collaborate with team members and ensure projects are delivered on time and within budget. Highly-motivated employee with desire to take on new challenges. Strong work ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills. Professional with keen attention to detail and design. Recognizes customer service as valuable tool to deliver overall quality and satisfaction. Committed to fulfilling all customer expectations through careful adherence to design plans and requests.
Overview
25
25
years of professional experience
Work History
Millwright, Carpenter, and Draftsman
Marcstone LLC
Wanamingo, MN
08.2021 - Current
- Aligned motors, pumps, gearboxes, conveyors and other mechanical systems.
- Removed old equipment from facilities in an efficient manner.
- Troubleshot problems with hydraulic systems and pneumatics.
- Fabricated spare parts from raw materials such as steel bars or plates.
- Replaced faulty parts such as bearings, gears, and shafts in a timely manner.
- Lubricated moving parts of machinery at regular intervals to prevent breakdowns.
- Repaired broken or worn parts by welding, grinding, machining or fabricating replacement parts as needed.
- Ensured safety regulations were followed while performing tasks.
- Ran tests on newly installed machines to verify their optimal functioning.
- Inspected and tested all machinery components to ensure proper functionality.
- Installed new equipment according to manufacturer specifications.
- Assembled industrial machines using appropriate tools and techniques.
- Repaired or replaced defective parts, using hand tools and power tools.
- Reassembled machines after repair work was completed.
- Performed preventive maintenance on all production machines.
- Monitored the operation of machinery during production runs.
- Disassembled defective machines for further inspection and repairs.
- Performed routine maintenance on equipment to ensure optimal performance.
- Moved heavy machinery and equipment using hoists, dollies, rollers, and trucks.
- Installed stationary industrial machinery and mechanical equipment following layout plans.
- Reviewed equipment and daily job specifications, drawings, and blueprints to properly and safely assemble machinery.
- Laid out flooring patterns according to design templates or customer specifications.
- Repaired or replaced damaged structures or components.
- Reviewed jobsite needs with foreman and coordinated construction.
- Completed routine preventive maintenance on heavy equipment, minimizing machinery downtime.
- Repaired and lubricated machines and equipment and assembled and installed equipment using hand tools and power tools.
- Observed required safety measures when using blowtorches, wrenches and forklifts to maintain high standards.
- Assembled machines and bolted, welded or riveted components to foundation or other structures using hand tools and power tools.
- Read blueprints and sketches to fabricate equipment, make modifications, and establish work procedures.
- Used rigging, hoists and equipment to move heavy machinery between locations and complete installations.
- Performed routine maintenance on carpentry equipment such as saws and drills.
- Built jigs and fixtures to assist in the production of parts.
- Fitted door locksets, deadbolts and other hardware on doors according to manufacturer's instructions.
- Constructed forms for concrete pours in accordance with building codes.
- Maintained a clean job site at all times by disposing of debris properly after each shift.
- Operated power tools safely when performing carpentry tasks such as drilling holes into lumber pieces.
- Read blueprints, schematics and drawings to determine layout requirements.
- Prepared surfaces by sanding or scraping off old finishes prior to refinishing them.
- Measured, cut and shaped wood materials to specifications using hand tools, such as saws and chisels.
- Inspected completed projects for quality assurance purposes before delivering them to customers.
- Studied blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required.
- Shaped or cut materials to proper measurements using hand tools, machines or power saws.
- Repaired or replaced damaged or defective parts using power tools and equipment.
- Used various carpenter's hand tools, portable power tools and standard measuring instruments.
- Cut timber, panels and other wooden materials according to measured dimensions.
- Promoted team safety by keeping work areas free of hazards.
- Used band, circular and compound miter saws.
- Conducted inspections, diagnosed problems, took measurements and made necessary adjustments to complete projects according to specifications.
- Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
- Worked independently on projects and tasks within carpentry team.
- Utilized various tools, equipment, materials and forming systems to complete construction tasks.
- Took accurate measurements to calculate size and amount of materials needed for project completion.
- Consistently constructed square and level projects.
- Studied blueprints or building plans to prepare layout and materials required.
- Verified trueness of construction using plumb and level.
- Adhered to project blueprints and requirements to deliver quality work.
- Measured and marked cut lines on materials using ruler or marking gauge.
- Bore boltholes in wood, masonry or concrete using electric or pneumatic drill.
- Inspected completed projects to ensure accuracy of workmanship according to plan specifications.
- Prepared working drawings for production staff that included details regarding material selection, fabrication methods, assembly procedures.
- Assisted in developing 3D models using computer-aided design software programs.
- Maintained records of all drawings produced including revisions and updates.
- Created detailed drawings from sketches, notes and verbal instructions using CAD software.
- Developed multiple drafts of blueprints for engineering projects such as highways, bridges, dams and buildings.
- Utilized drafting techniques to produce accurate technical drawings that met the standards of engineering design requirements.
- Validated accuracy of final product against original specifications before submitting it for approval.
- Updated existing drawings following changes made during the design phase due to client requests or new regulations.
- Analyzed project specifications and determined the most efficient layout for components.
- Evaluated current drafting processes identifying areas where improvements could be made resulting in time savings or cost reductions.
- Implemented revisions as required by engineering, customer or suppliers.
- Developed precise drawings from scratch based on written and verbal specifications supplied by customer, engineering or sales.
- Produced drawings using CAD software, drafting machines or hand tools.
- Signaled crane operator to lower basic assembly units to bedplate and aligned unit to centerline.
- Maintained clean and environmentally safe work area.
- Used and maintained shop equipment to prevent downtime and reduce safety hazards.
Residential Carpenter
Self-employed, Subcontractor
Wanamingo, MN
01.2015 - 08.2021
- Inspected job sites for quality control purposes.
- Conducted regular site visits at various locations throughout the duration of construction projects in order to monitor progress.
- Participated in weekly staff meetings with general contractors to review current project statuses.
- Reviewed bid documents to determine scope of work, timeline requirements, and associated costs for projects.
- Interacted with homeowners to understand the job specifics and expectations.
- Used specialized tools to install ceramic tile and hardwood.
- Inspected work site following each shift and removed debris to keep area clean.
- Conducted quality control inspections to uphold high standards of workmanship.
- Repaired damaged doors, windows frames, floors, roofs, decks, stairs and other carpentry items in homes.
- Fitted skirting boards around the edges of rooms.
- Hung pre-hung doors in frames ensuring they were level and plumbed correctly.
- Cutting timber into various sizes using hand saws or power saws.
- Performed maintenance tasks such as caulking windowsills and doorframes; replacing weather stripping; repairing siding; installing insulation; replacing rotten boards; painting surfaces .
- Provided excellent customer service by addressing any questions or concerns promptly.
- Framed basements with metal or wooden studs while adhering to building codes.
- Installed cabinetry by measuring accurately and using appropriate tools.
- Set up jigs for repetitive jobs like cutting window frames.
- Worked with ladders safely when required to reach heights.
- Planned layout of project based on blueprints or verbal instructions from supervisor.
- Completed detailed finish carpentry work including crown moldings installation.
- Maintained a safe work environment at all times by following safety regulations.
- Constructed interior walls and partitions with studs, headers, and blocking.
- Measured, cut, shaped, assembled, and joined materials to construct structures.
- Inspected existing structures for repair or replacement needs.
- Installed and finished drywall, wood paneling, and trim for residential projects.
- Operated power tools such as drills or routers in order to make precise cuts.
- Studied blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required.
- Shaped or cut materials to proper measurements using hand tools, machines or power saws.
- Repaired or replaced damaged or defective parts using power tools and equipment.
- Cut and installed tile and hardwood flooring for residential and commercial buildings.
- Promoted team safety by keeping work areas free of hazards.
- Led apprentices and trainees in building construction and renovation.
- Anchored and braced forms to complete precise joining.
- Applied design-specific wood and composite trim according to architectural plans and neighborhood regulations.
- Installed cabinets, base cabinets and crown molding.
- Reviewed jobsite needs with foreman and coordinated construction.
- Used various carpenter's hand tools, portable power tools and standard measuring instruments.
- Examined buildings and project specifications to determine measurements.
- Conducted inspections, diagnosed problems, took measurements and made necessary adjustments to complete projects according to specifications.
- Used band, circular and compound miter saws.
- Cut timber, panels and other wooden materials according to measured dimensions.
- Performed various carpentry duties, including both rough and finish carpentry.
- Measured, cut, and installed staircase spindles.
- Positioned and installed floor joists, trusses and rafters.
- Installed building windows, trim and cabinetry alone or with assistants to meet job deadlines.
- Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
- Worked independently on projects and tasks within carpentry team.
- Consistently constructed square and level projects.
- Maintained clean and organized workplace to optimize performance, efficiency and safety.
- Utilized various tools, equipment, materials and forming systems to complete construction tasks.
- Removed damaged or defective parts or sections of structures and repaired or replaced using hand tools.
- Erected scaffolding to assemble above-ground structures.
- Covered subfloors with building paper and lay hardwood or parquet floors by nailing to subfloor or cementing to mastic base.
- Studied blueprints or building plans to prepare layout and materials required.
- Measured and marked cut lines on materials using ruler or marking gauge.
- Verified trueness of construction using plumb and level.
- Roughed in door and window frames or subflooring in structures undergoing construction or repair.
- Bore boltholes in wood, masonry or concrete using electric or pneumatic drill.
Laborer
Marcstone LLC
Wanamingo, MN
01.2013 - 01.2015
- Transported heavy items from one location to another using hand trucks or carts.
- Ensured that all personal protective gear was worn at all times while on the job site.
- Followed all safety procedures when handling hazardous materials in the laboratory setting.
- Cleaned work area after job completion ensuring all debris is properly disposed of.
- Performed regular checks of equipment for proper operation and safety compliance.
- Unloaded freight from containers and organized them for storage in designated areas.
- Inspected finished projects for quality assurance purposes before handing off to customer.
- Assisted with basic maintenance tasks such as sweeping, mopping, painting, and cleaning.
- Lifted objects weighing up to 50 pounds without assistance when necessary.
- Operated various power tools such as drills and saws safely while following manufacturer's instructions.
- Stacked and arranged products on pallets according to size and weight requirements.
- Loaded and unloaded materials onto or from pallets, trucks, or other vehicles using a forklift.
- Worked with team members to ensure efficient workflow throughout the day.
- Organized tools, supplies, and equipment needed for specific jobs according to instructions provided by supervisor.
- Completed variety of physical labor tasks.
- Contributed innovative ideas and solutions to enhance team performance and outcomes.
- Collaborated with team members to complete assigned tasks and meet tight deadlines.
- Operated and maintained a variety of equipment including hand and power tools.
- Sorted and placed materials or items on racks, shelves or in bins to keep warehouse organized.
- Met company and OSHA safety guidelines for work site operations to minimize worker risk.
- Performed regular servicing and preventive maintenance on assigned equipment.
- Mixed, poured, and spread concrete, asphalt gravel, and other materials.
- Loaded and unloaded daily material shipments, keeping products organized and secure to prevent damage and optimize handling.
- Operated pallet jacks and forklifts to load and unload supplies and materials.
- Utilized two-way radios and hand signals to coordinate communication between equipment operators.
- Prepared items for transportation installing bracing, padding and strapping to prevent damage.
- Performed physical activities requiring heavy lifting, walking and standing for long periods of time.
- Lubricated and cleaned machinery and tools.
- Maintained clean, safe working environment by removing debris from job site prior to shift completion.
- Performed demanding physical work over extended periods and modeled positive attitude.
- Loaded materials and tools into vehicles and unloaded upon arrival at jobsites.
- Displayed high standards for quality workmanship and routinely double-checked work.
- Gained independent working skills and guided and mentored less experienced team members.
- Operated equipment with strong focus on safety and ground communication.
- Loaded or unloaded building materials to distribute machinery or tools.
- Tended pumps, compressors or generators to provide power or heat or move materials.
- Learned and mastered skilled trade specialties under guidance of expert mentors.
- Lubricated, cleaned or repaired machinery or equipment.
- Worked productively as lead or helping team member to drive customer satisfaction.
- Operated power tools such as drills, grinders, saws, and trowels.
Apprentice, Carpenter
JKL WOODWORKS
Nerstrand, MN
06.2000 - 01.2013
- Observed experienced professionals performing their duties in order to gain practical knowledge of industry standards.
- Attended meetings with clients to discuss progress on projects.
- Assisted in the preparation of project plans and schedules.
- Provided input during brainstorming sessions related to new ideas for improving work processes.
- Assisted in loading and unloading materials from trucks and other vehicles.
- Operated light construction equipment such as forklifts and bobcats.
- Performed general maintenance of tools, equipment, and machinery.
- Reported any accidents or injuries immediately to supervisors or safety personnel.
- Used hand tools such as hammers, screwdrivers, wrenches, drills to complete tasks.
- Adhered strictly to all safety procedures while performing assigned tasks.
- Moved heavy objects using appropriate lifting techniques.
- Transported materials between locations using company vehicles or personal transportation methods.
- Followed safety guidelines while operating power tools and heavy machinery.
- Inspected completed projects for accuracy and quality assurance purposes.
- Assisted in the installation of building components such as doors, windows, floors.
- Cleaned up work areas to maintain a safe working environment.
- Communicated effectively with coworkers regarding job tasks and project timelines.
- Resolved conflicts between workers in a professional manner when necessary.
- Participated in team meetings with supervisors to discuss current projects and upcoming deadlines.
- Maintained a clean work area throughout the duration of each project.
- Worked closely with supervisors to ensure that job tasks were completed correctly and efficiently.
- Followed instructions from supervisors regarding job duties and responsibilities.
- Coordinated phases of construction projects from inception to completion.
- Gained independent working skills and guided and mentored less experienced team members.
- Performed demanding physical work over extended periods and modeled positive attitude.
- Loaded materials and tools into vehicles and unloaded upon arrival at jobsites.
- Understood how to operate and maintain job site equipment safely and for maximum productivity.
- Operated equipment with strong focus on safety and ground communication.
- Inspected sites before and after construction projects.
- Displayed high standards for quality workmanship and routinely double-checked work.
- Loaded or unloaded building materials to distribute machinery or tools.
- Cleaned or prepared construction sites to eliminate hazards.
- Controlled traffic passing near, in or around work zones.
- Demonstrated best safety practices working at heights and lifting various objects.
- Tended pumps, compressors or generators to provide power or heat or move materials.
- Worked productively as lead or helping team member to drive customer satisfaction.
- Learned and mastered skilled trade specialties under guidance of expert mentors.
- Lubricated, cleaned or repaired machinery or equipment.
- Signaled equipment operators to facilitate alignment, movement or adjustment of machinery.
- Dug ditches or trenches, backfilled excavations or compacted and leveled earth to grade specifications.
- Measured, marked or recorded openings or distances to construction layout areas.
- Assisted with diverse construction challenges to help team and customer.
- Attached moldings along walls and ceilings using nails or glue guns.
- Cut materials with power saws or routers following measurements and templates.
- Installed trusses, rafters and joists according to blueprints.
- Inspected completed work for accuracy before it was delivered to customers.
- Assisted experienced carpenters in the construction of wooden frames for buildings.
- Built stairs according to specifications.
- Replaced broken windowpanes and glazed windows according to safety standards.
- Assisted in installing interior doors, windows, cabinets and other fixtures.
- Worked with a variety of materials such as lumber, plywood, MDF board .
- Measured distances accurately using measuring tapes, squares and levels.
- Repaired damaged structures by replacing broken pieces of wood or adding new components.
- Followed instructions from senior carpenters when performing tasks.
- Installed drywall sheets and finished them with joint compound.
- Maintained a safe working environment at all times by adhering to safety regulations.
- Assisted in laying out flooring systems including subflooring, hardwood floors, carpeting, tile .
- Helped measure and cut wood to required sizes using hand tools such as saws, planes and chisels.
- Performed general maintenance tasks such as sanding surfaces or painting woodwork.
- Ensured that all tools were stored properly after use.
- Operated power tools safely while completing carpentry projects.
- Cleaned job site after work completion and disposed of debris in proper containers.
- Cut materials on job site to prepare for installation.
- Uncovered product defects and addressed with job foreman.
- Encouraged feedback from foreman and trade workers on site to incorporate suggestions into later work.
- Assisted master carpenters with installations for residential and commercial customers.
- Installed, assembled and repaired woodwork, millwork, cabinetry and trim under supervision of master carpenter.
- Helped with movement of materials and equipment to different job sites.
- Read and interpreted specifications and construction drawings to determine best techniques to complete each job.
- Installed drywall, ceilings and trim and fabricated replacement trim and moldings.
- Assisted journeyman carpenters in installing fixtures and fittings.
- Utilized various tools, equipment, materials and forming systems to complete construction tasks.
- Consistently constructed square and level projects.
- Maintained clean and organized workplace to optimize performance, efficiency and safety.
- Worked independently on projects and tasks within carpentry team.
- Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
- Removed damaged or defective parts or sections of structures and repaired or replaced using hand tools.
- Erected scaffolding to assemble above-ground structures.
- Covered subfloors with building paper and lay hardwood or parquet floors by nailing to subfloor or cementing to mastic base.
- Bore boltholes in wood, masonry or concrete using electric or pneumatic drill.
- Installed windows, flooring, or trim using hand or power tools.
- Roughed in door and window frames or subflooring in structures undergoing construction or repair.
- Verified trueness of construction using plumb and level.
- Measured and marked cut lines on materials using ruler or marking gauge.
- Anchored and braced forms and other structures in place using nails, bolts, anchor rods, steel cables, planks, wedges and timbers.
- Inspected tiles, wall coverings or woodwork for breakage or damage.
Education
Kenyon-Wanamingo High School
Kenyon, MN01-2005
Skills
- Quality control
- Construction site inspection
- Safety compliance
- Team collaboration
- Equipment operation
- Process improvement
- Problem-solving abilities
- Blueprint reading
- Equipment maintenance
- Material handling
- Finish carpentry
- Residential construction
- Hand tools mastery
- Remodeling projects
References
References available upon request.
Timeline
Millwright, Carpenter, and Draftsman
Marcstone LLC
08.2021 - Current
Residential Carpenter
Self-employed, Subcontractor
01.2015 - 08.2021
Laborer
Marcstone LLC
01.2013 - 01.2015
Apprentice, Carpenter
JKL WOODWORKS
06.2000 - 01.2013
Kenyon-Wanamingo High School