KATRINA BOGGIO-MEANS
Gillette,WY
Summary
I am a certified Journeyman HVAC tech and certified journeyman gaspipe tech, I have current msha and site specific safety designations including class A. I am fortunate to have to the ability to install,design, tie-in, and maintain HVAC and HVAC-R systems, start to finish. I am always learning and am happy to pursue continuing education and gain more certifications and skillsets. I am a proficient Commercial/Industrial/residential HVAC installer with excellent technical and coordination skills. I have a wide skill set, am highly motivated and believe I would become a valuable asset to your company. I am ready to prove through hard work that you are making the right choice by bringing me on.
Overview
14
14
years of professional experience
Work History
Journeyman HVAC Tech/ Journeyman Gas Pipe Tech
Air-Tech Heating, Air Conditioning & Refigeration
Gillette, WY
03.2023 - 04.2024
- Provided full shop fabrication abilities, hand layout and computer plasma layout. Burned out, broke, bent up, and put together fittings and ductwork including ductmate and double skeined duct for industrial, commercial, and residential applications. Built sleeves, cans, square to rounds, and multiple complex custom fabrication fittings.
- Assisted in complete control wiring systems in multiple locations including all floors of the first national bank building and narm administration building. Installed every component on hvac-r side of multiple locations, from demolition phase, to vav/unit/boiler/chillers/condensers/ line set installation to the electrical tie-ins, communication wires runs, running of thermostats, sensors, smoke detection, fire dampers and finished, fully operational systems. Laid out and completed custom residential applications, new construction and changeouts.
- Installed and tied in mini-splits in both commercial and residential applications.
- Installed commercial grade coolers and evaporators and maintained preventive maintenance.
- I own all my own power and hand tools and equipment needed to get things done.
- Completed minor electrical, plumbing and HVAC maintenance for building occupants.
- Changed HVAC filters and cleaned condensation drains to perform preventive maintenance on HVAC systems.
- Installed insulation materials around HVAC systems.
- Performed maintenance on existing HVAC systems.
- Installed, adjusted, repaired and maintained HVAC systems.
- Ordered parts and materials needed for HVAC systems.
- Installed new HVAC systems according to manufacturer specifications.
- Developed plans for HVAC system installations and repairs.
- Troubleshot electrical wiring issues related to HVAC systems.
- Maintained and serviced HVAC systems and refrigeration equipment.
- Assembled new HVAC units according to manufacturers' instructions.
- Replaced damaged components of HVAC systems when necessary.
- Communicated effectively with clients about their HVAC needs.
- Assisted in installing, repairing and maintaining HVAC systems.
- Installed flashings, louvers and dampers to complete HVAC systems.
- Installed new HVAC systems in residential and commercial buildings.
- Provided technical advice regarding HVAC related issues to customers.
- Performed preventative maintenance on HVAC systems, pumps, and motors.
- Diagnosed problems with HVAC systems using specialized testing equipment.
- Performed routine preventive care and repairs to HVAC systems.
- Drafted shop drawings for fabrication of HVAC systems components..
- Installed commercial and residential HVAC systems, including ductwork and piping.
- Ensured compliance with all applicable codes related to HVAC systems.
- Connected HVAC systems to existing gas lines or fuel tanks.
- Performed calculations for design of HVAC systems and equipment sizing.
- Assisted in performing complex installations of commercial-grade HVAC equipment.
- Installed and tested HVAC-R systems according to manufacturer's specifications.
- I will be happy to tell the rest of the invaluable skills I’ve learned and performed while working for this company.
IMAGER/DATA RESEARCH
DKS LAND SERVICES\PACER ENERGY
Gillette, WY
04.2018 - 09.2020
- I imaged land records and researched public records including, but not limited to, deeds, taxes, easements, liens, judgements, name changes, rights of survivorship, surveys, etc
- I researched and completed abstracts for the purpose of running title on mineral and gas right ownership, to facilitate acquisitions of drilling and mining permits
- I traveled in the north-western wyoming area and got land records from multiple courthouses and county assessor offices, and acquired BLM records and associated permits, etc online and in person
- I was able to do a lot of my research from home also, spending many nights falling asleep with my pc on my lap working to finish deadlined projects
- I also answered and talked to individuals and companies on DKS behalf and finding the information they needed
- I collaborated remotely for another landman contracted out of Colorado named Matt Story also, and completed imaging and research info that he needed to facilitate work from his home office also
- I loved the research side of this job immensely, and had it not been for lack of work in the mineral industry I would probably have continued contracting for Lindsey.
HVAC Installer
Joe's Heating and Plumbing
Gillette, WY
06.2013 - 09.2013
- I installed HVAC systems in mostly new construction homes, some light commercial, and existing remodels
- I spent time in the shop fabricating, as it's always been one of my strong suits
- I was also able to learn how to do a lot of service work
- How to hookup and wire residential sized units both heat and condensing units, I installed mini-splits, ran line sets, piped and installed fireplaces and water heaters
- Joe Suchor is great, I had to leave him because I was pregnant with my last and youngest child and I had some issues with the pregnancy and needed to take it easy under direction from my Doctor
- I had 2 children, one on the way with only one in school at the time, so we made the decision for me to stay at home with the kiddos for a bit again, which explains the gaps in my employment also.
HVAC Installer
Precision Mechanical
Rapid City, SD
04.2012 - 04.2013
- I installed and fabricated ductwork, exhaust systems, heating and cooling units in mainly commercial/industrial applications, some residential
- Jobs included: Billion Kia, Rapid City, SD, Complete new construction
- Supervised up to 10 person crew under superintendent, coordinated and laid out the construction and installation of 5 commercial rooftop units, and AQC underground blue duct state of the art exhaust system
- Absolutely zero items on our punch-list
- East Middle School, Rapid City, SD Complete New Construction From rough in to complete trim out; Tech Towers, Rapid City, SD Complete new construction, 36 individual apartment units, all exposed spiral ducted.; Mammoth Homes, Box Elder, SD
- Supervised, laid out and installed 12 residential units, ducted, and trimmed out.; Long construction, supervised, laid out, and installed side by side luxury townhome unit.; Rapid City Regional Hospital and Medical Office Building, Rapid City, SD, Demolition/Remodel.: Sandstone Ridge Pool Room, Rapid City, SD Completely custom Aluminum Fabrication and install of Supply and Return.
HVAC Installer
Action Mechanical
Rapid City, SD
08.2010 - 08.2012
- I installed and fabricated ductwork, exhaust systems, heating and cooling units in mainly commercial/industrial applications, some residential/commercial (apartments)
- Jobs include: Pankratz Lodge, Keystone, SD Complete new construction Installation of 6 commercial units,4 unit heaters, multiple exhaust systems, 2 boilers, geo-thermal heat system,custom aluminum kitchen and pool room ducting, complete custom grille fabrication and welding
- Most of our custom work on this home was done on-site, with the exception of our straight galvanized duct
- This was the job we received our master craftsmanship award for.: Black Hills Ammunition, Complete Remodel of the old Gillette dairy in Rapid City, converted to a testing and ammunitions manufacturing plant.I interpreted, under my superintendent Craig Chmelka, the entire Layout and take-off of the new construction phase of this building, drew up, turned in and then installed the systems in this building.; Long John Silvers/KFC Rapid City, SD, Drew up and Installed full system on this building, including custom stainless steel work, the only thing I did not do on this job was weld my own grease duct.; Buffalo Wings and Rings, Rapid City, SD, Full new construction of this building.; Homestead Garden Apartments Rapid City, SD full new construction, rough-in to trim out.; The Heart Doctors Rapid City, SD complete commercial new construction; Pine Ridge Hospital Pine Ridge, SD complete new addition, some tie-in to existing system.; Air Force Financial services center Ellsworth Air Force Base, SD new addition, some remodel of existing systems.; Maintenance building Ellsworth Air Force Base, SD Complete Ridge Apartments, Rapid City, SD, Full new construction of 8 apartment buildings.; Black Hills Forest Service Hill City Facility, Install of system and exhaust from a converted shop to sleeping quarters for personnel, all new construction.; Prairie Berry Winery, Hill City, SD, tied into existing system to rework original layout and installation of new exhaust systems.; Stony Creek Apartments, Rapid City, SD, Full new construction of Ten Apartment buildings
- There were also many more small jobs that I have not included, but will provide more detailed information on any of my jobsites upon request
- I was also so fortunate to have worked for a well rounded company that kept me working, even in slow times
- I was able to learn plumbing skills and some service work also including, some basic electrical work on lower level install jobs.
Sheet metal/HVAC
PHCC Apprenticeship Program
Gillette, WY
04.2018 - 09.2020
- Finished all homework assignments, tests, and required on the job hours.
BARTENDER
The Montgomery Bar
Gillette, WY
04.2021 - 09.2022
- I bartended in the physical bar and was also able to go on some special events catering off-site
- I also maintained daily cleaning and other tasks.
Education
High School Diploma -
Central High School
01.1999
PH
Skills
- Proficient with hand tools
- Wide knowledge of shop equipment and fabrication
- Ability to run plasma cutters, oxy/acet torches, many different varieties of lift equipment, and other tools of the trade
- An asset to any job site due to my coordination skills with other trades
- Proficient in running crews of up to 10
- Experienced at reading blue prints and able to do full building takeoffs with relative ease
- Hard working and I take pride in my work
- Also proficient in demolition/remodeling
Accomplishments
- Attended and completed a 4 year apprenticeship program through plumbing, heating, cooling contractors.
- Recipient of a CIC master craftsmanship award of excellence for my work on Pankratz Lodge in Keystone, SD in 2009.
- Completed AQC Industries training on the installation of Blue Duct and supervised/participated in the installation.
- Attended safety seminars including hospital/medical facility installation and Jacobs Engineering practices for secure military facilities.
Journeyman Level
True
Phone
(605)858-8421, (605)858-8421
Timeline
Journeyman HVAC Tech/ Journeyman Gas Pipe Tech
Air-Tech Heating, Air Conditioning & Refigeration
03.2023 - 04.2024
BARTENDER
The Montgomery Bar
04.2021 - 09.2022
IMAGER/DATA RESEARCH
DKS LAND SERVICES\PACER ENERGY
04.2018 - 09.2020
Sheet metal/HVAC
PHCC Apprenticeship Program
04.2018 - 09.2020
HVAC Installer
Joe's Heating and Plumbing
06.2013 - 09.2013
HVAC Installer
Precision Mechanical
04.2012 - 04.2013
HVAC Installer
Action Mechanical
08.2010 - 08.2012
High School Diploma -
Central High School
PH