Kenneth Bortzer
Electrician
Madison Heights,Virginia
Summary
I am a skilled Electrician with over Forty years experience in most types of required areas to complete jobs from start to to finish. From slab work off of blueprints for correct stub-ups for switch-gear placement to coordination with other trades to insure that what is called for is actually done. I have worked mostly on Service Entrance and high voltage. Service distribution, power risers,life safety,and emergency back-up power systems, I have years of Lead Man skills to act as a direct connection between my supervisors and other workers on various crews from the running of conduits ,wire pulling,and the successful landing or termination of both primary and secondary voltages. I have an extensive first hand knowledge of the installation and termination of high voltage conductors,switch gear installation,and back-up power, I have helped with the coordination of scheduled and emergency shut downs. I have worked on fire alarm systems and with fire inspectors,and local inspectors at major facilities to bring systems on line without interruption of service. I have held certifications in First aide, CPR, Mine safety, OSHA 10, Scaffold inspection, Arial platforms, Lull lift operation, confined space training,and have always made myself available for any seminars that will further myself and others the skills needed to work safely and productively.
Overview
19
19
years of professional experience
Work History
Electrician/Lead Man
Design Electrical Contractors
Charlottesville, VA
05.2018 - 10.2019
- Collaborated with team members to complete projects within deadlines, enhancing workflow effectiveness.
- Interpreted blueprints and technical diagrams to execute installations accurately.
- Adhered to safety protocols while performing electrical work, minimizing risks on job sites.
- Assisted in training new electricians on best practices and safety standards for electrical work.
- Performed inspections and testing of electrical systems, identifying issues for prompt resolution.
- Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
Electrician/ Lead Man
Design Electrical Contractors
Charlottesville, VA
06.2014 - 01.2016
- Installed electrical systems in commercial and Industrial buildings following industry standards.
- Installed and wired electrical transformers, service panels, and circuit breakers.
- Conducted troubleshooting and repair of electrical issues to ensure optimal system performance.
- Collaborated with team members to complete projects within deadlines and maintain safety standards.
- Interpreted blueprints and technical diagrams for accurate installation and maintenance tasks.
- Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
- Performed routine and complex maintenance and repairs on various electrical equipment.
- Stored and maintained power tools and equipment for each job.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
- Coordinated with other tradespeople seamlessly during large-scale installations or renovations to ensure smooth project progressions.
Electrician/Lead Man
Design Electrical Contractors
Charlottesville, VA
10.2012 - 04.2014
- Installed electrical systems and components in residential and commercial buildings.
- Conducted routine maintenance and troubleshooting on electrical systems to ensure operational efficiency.
- Developed strong relationships with clients by providing excellent customer service during installations and repairs.
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
- Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
- Collaborated with construction teams to ensure seamless integration of electrical systems within new builds.
- Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
- Ensured project success by meticulously planning and executing electrical installations in large-scale construction projects.
- Fostered strong relationships with suppliers to secure best pricing on high-quality electrical components.
- Contributed to safer work environments by strictly following safety protocols and conducting regular risk assessments.
- Troubleshot and repaired malfunctioning systems and components.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
Electrician/Lead Man
Design Electrical Contractors
Charlottesville, VA
10.2007 - 07.2012
- Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
- Improved electrical system safety by conducting thorough inspections and identifying potential hazards.
- Maintained compliance with local codes and regulations by staying up-to-date on industry standards and best practices.
- Mentored apprentice electricians in proper installation techniques, safety protocols, and troubleshooting methods to enhance their skill sets.
- Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
- Enhanced quality control by inspecting condition of equipment and tools.
- Increased productivity by effectively managing multiple projects simultaneously while maintaining high-quality workmanship.
- Achieved significant cost savings for projects, carefully selecting materials and optimizing resource allocation.
- Enhanced team productivity, delegating tasks effectively and providing support where needed to meet tight deadlines.
- Optimized electrical system designs for new constructions, ensuring scalability and sustainability.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Followed state and local building regulations based on National Electrical Code.
- Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
- Installed 120/208 volt systems and 347/600 volt systems.
- Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
- Interpreted blueprints and technical diagrams to execute installations accurately.
- Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
- Installed and wired electrical transformers, service panels, and circuit breakers.
- Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
- Coordinated with other tradespeople seamlessly during large-scale installations or renovations to ensure smooth project progressions.
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
- Troubleshot and repaired malfunctioning systems and components.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
Electrician
G J Hopkins Inc. Electrical/Mechanical Contractors
714 5th Street N.E. Roanoke, Va, 24025
07.2006 - 05.2007
- Installed, maintained, and repaired electrical systems in residential and commercial settings.
- Conducted thorough inspections to ensure compliance with local and national electrical codes.
- Collaborated with project managers to plan electrical layouts for new constructions and renovations.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Trained junior electricians on safety protocols and best practices in electrical installation techniques.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
- Ensured project success by meticulously planning and executing electrical installations in large-scale construction projects.
Electrician
Systems East Inc. Lynchburg Branch.
30 Basil Sawyer Drive, Hampton, Va,23666.
03.2005 - 06.2006
- Diagnosed and resolved complex electrical issues, enhancing system reliability and performance.
- Facilitated smoother operations in manufacturing facilities by installing and maintaining high-capacity electrical machinery.
- Delivered customized electrical solutions for unique client needs, from smart home automation to backup power systems.
Electrician
Design Electrical Contractors
Charlottesville, VA
04.2001 - 10.2001
- Installed, maintained, and repaired electrical systems in residential and commercial settings.
- Interpreted blueprints and technical diagrams to execute precise electrical installations.
- Conducted routine inspections to ensure compliance with safety standards and regulations.
- Diagnosed electrical issues using testing equipment, improving response time for repairs.
- Inspected worksites and installations to verify compliance with state safety codes.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Examined electrical units for loose connections and broken insulation.
- Studied building schematics to determine location of wiring and equipment.
- Fabricated custom and replacement parts according to specifications, using hand tools.
- Performed routine and complex maintenance and repairs on various electrical equipment.
- Stored and maintained power tools and equipment for each job.
- Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
- Contributed to safer work environments by strictly following safety protocols and conducting regular risk assessments.
- Optimized electrical system designs for new constructions, ensuring scalability and sustainability.
- Followed state and local building regulations based on National Electrical Code.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Installed 120/208 volt systems and 347/600 volt systems.
- Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
- Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
- Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
- Troubleshot and repaired malfunctioning systems and components.
Education
Some College (No Degree) - Electrical Code
Central Virginia Community College
Lynchburg, VA05-1989
High School Diploma -
GED
Buckingham, VA 05.2001 -
Skills
1Safe work history2Blueprint reading understanding 3 High Voltage work experience 4 Lengthy conduit bending skills on larger sized pipe 25 and up with one shot hydraulic benders 5 abundance of experience with wire pulling of large conductors over lengthy spans
Work Availability
monday
tuesday
wednesday
thursday
friday
saturday
sunday
morning
afternoon
evening
swipe to browse
Timeline
Electrician/Lead Man
Design Electrical Contractors
05.2018 - 10.2019
Electrician/ Lead Man
Design Electrical Contractors
06.2014 - 01.2016
Electrician/Lead Man
Design Electrical Contractors
10.2012 - 04.2014
Electrician/Lead Man
Design Electrical Contractors
10.2007 - 07.2012
Electrician
G J Hopkins Inc. Electrical/Mechanical Contractors
07.2006 - 05.2007
Electrician
Systems East Inc. Lynchburg Branch.
03.2005 - 06.2006
High School Diploma -
GED
05.2001 -
Electrician
Design Electrical Contractors
04.2001 - 10.2001
Some College (No Degree) - Electrical Code
Central Virginia Community College