Kevin Adrian

• 7 years (5 years of Apprenticeship included) I have gone from apprentice (green hand) to foreman
• I have installed Residential, Commercial, Industrial, Fire Alarm, Motor Control, Clean Room exp., Service, Maintenance, Trouble Shoot, Tool Hook Up, and problem solve

• Job foreman and Job inspector
• 4 months

• Service truck
• This service truck was unique due to the special services they offered
• We did automation service and repair
• We serviced all of Krispy Kreme donuts in Austin and surrounding areas
• Grounding, Panel infer red/ x-rays
• Controls, All types of Electrical
• 1½ years

• As the Supervisor over all of the electrical installation in Samsung my crew and I would inspect all installation of gear before anything was powered up
• We would inspect everything to assure it was code and installed in with quality
• We would also do continuity and or Meg test on all wires
• I inspected all electrical for tool hook up an all tools we installed
• This would include all bus ducts as well

• Tool Hook Up
• I was Final Inspector for all of “Tool Hook Up” at Samsung Austin

• Main Distribution
• I did the main distribution in several builds
• Some of the distribution included generator back upsHere are a few I supervised- Samsung, Applied Materials, and Flextronics
• Controls
• I ran several control jobs
• There are several types of control jobs, not just lighting
• I was a Superintendent at Samsung fresh water purification plant
• I ran the controls for the Samsung Acid storage facility
• I ran the security, camera, and fire alarm teams at the high security facility HID
• I was Superintendent for the lighting controls at the Dell Medical school
• Fire Alarm
• I ran several jobs as supervisor on multiple occasions
• Cost Engineer
• I performed this job at Samsung
• This title included counting every item that was installed on manufacturing tools
• Then walk the tools with Samsung Engineers

• As Area Foreman I was in charge of the Podium and all of the electrical systems
• The Podium on this project was1st-7th floors
• Lighting and lighting control
• This included installation of lighting zones, energy efficiency controls, all interior and exterior lighting
• Security
• This included all exterior and interior door controls
• Such as badge access and cameras
• Fire Alarm
• We installed conduit for race ways, pulled in fire alarm wires, and mount boxes for devices
• Branch Circuits
• This consists of all wiring that is not main primary
• Kitchen Appliances
• This includes all appliances and power in all kitchen areas
• Such as ovens, mixers, refrigerators, freezers, and ansul systems
• Elevators
• We would pull the power for Elevator shaft lighting, fire alarms, and power to pumps
• I was moved into the office to start assisting with the drawings that had been lacking specific details I was trained to operate Revit, Navis Works, and Pro Cor
• I had previously Auto Cad and Bluebeam experience
• Fairmont Hotel/4 monthsBERG Electric- Area Foreman (Fairmont Hotel/ 4 months)
• As Area Foreman I was in charge of the Podium and all of the electrical systems. The Podium on this project was 1st-7th floors.
• • Lighting and lighting control. This included installation of lighting zones, energy efficiency controls, all interior and exterior lighting.
• • Security. This included all exterior and interior door controls. Such as badge access and cameras
• • Fire Alarm. We installed conduit for race ways, pulled in fire alarm wires, and mount boxes for devices.
• • Branch Circuits. This consists of all wiring that is not main primary.
• • Kitchen Appliances. This includes all appliances and power in all kitchen areas. Such as ovens, mixers, refrigerators, freezers, and ansul systems.
• • Elevators. We would pull the power for Elevator shaft lighting, fire alarms, and power to pumps.
• I was moved into the office to start assisting with the drawings that had been lacking specific details I was trained to operate Revit, Navis Works, and Pro Cor. While having experience in Bluebeam and Auto Cad, this enhanced my skills.

Detailer/Designer- In this position I quickly became the lead designer with my background in electrical and construction skills.

• Fairmont- Assisted in power layout of rooms.

• Tyndall Residents- Assisted with power lay out and started working with 3D coordination.

• US Border and Customs at Columbus New Mexico (border crossing). I started running the distribution power and communications around the site. Then started the electrical design of buildings and all coordination involved.

• UTMB Medical Center. We started the remodel of the hospital. I modeled several floors and coordinated these levels.

• While running My own projects I assisted on several others. I was an advisor to these detailers due to my extensive electrical background.

• Travis County Court House. I assisted Detailers with layout and coordination.

• Garza Ranch(Apartments) I assisted Detailers with layout and coordination.

• Kalahari Convention Center. I was the lead detailer and coordinator

• Autograph Hotel Collection(Otis Hotel) I was the lead detailer and coordinator

• Hyatt Hotel Austin, 5th and Brazos (Tommie and Thompson Hotels (32 stories). I was lead detailer and coordinator

• Developed electrical design plans for enhancing system efficiency and reliability.
• Improved project outcomes by collaborating with cross-functional teams on electrical designs.
• Created detailed schematics to ensure accurate implementation of electrical systems.
• Coordinated with architects and engineers to optimize electrical layouts for construction projects.
• Increased design accuracy with thorough review of electrical specifications and drawings.
• Developed innovative solutions for complex electrical design challenges.
• Enhanced client satisfaction by delivering high-quality electrical designs on time.
• Conducted site assessments to inform electrical design decisions and improve project outcomes.
• Streamlined design processes by utilizing CAD software for electrical drafting as well as 3D modeling.
• Improved project timelines by efficiently managing multiple design projects simultaneously.
• Collaborated closely with contractors to ensure alignment on electrical design specifications using Navisworks.
• Reduced design errors by conducting thorough quality checks on all electrical plans.
• Engaged in continuous learning to stay updated on industry trends and enhance design skills.
• Incorporated updates to drawings based on changes to designs.
• Streamlined the design process for electrical systems, resulting in reduced overall project time.
• Improved project efficiency by designing electrical systems and managing technical documentation for various construction projects.
• Optimized communication between team members by maintaining organized records of design changes and updates throughout the course of each project.
• Delivered high-quality designs that met client specifications through meticulous attention to detail during drafting stages.
• Assisted in the development of standard operating procedures for the Electrical Design department, promoting consistency and quality across all projects.
• Ensured accuracy of electrical drawings by performing detailed calculations and adhering to established codes and guidelines.
• Successfully managed multiple concurrent projects, prioritizing tasks based on deadlines and resource availability.
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
• Followed state and local building regulations based on National Electrical Code.

• Electrical work from residential to comercial
• I instal data cables, networking, cameras for security.
• I would install Electrical for custom home builders
• Electrical maintenance for customers
• I perform electrical maintenance for several dental offices from San Antonio to Waco
• I would work with other electrical contractors as an independent contractor when they needed my experience
• I would help contractors as a consultant on jobs
• I am a consultant for remodel jobs at dental offices i do maintenance in.
• I would do Electrical Service work
• Equipment operator
• I ran all my own equipment when needed
• Custom fabrication (welding)
• I would build Electric and automatic gates for commercial/ residential
• I do general construction repairs when needed such as sheetrock repair, painting, cabinet repair, and basic plumbing.

• Custom design and fabrication of all vehicles
• I design and build hunting vehicles of all types
• I also build hunting stands, hog traps, and custom welding. Such as hand rails, wine racks, burglar bars, and gates.
• We offer maintenance on vehicles
• We instal lighting, radios, and speakers
• We build and perform maintenance on top drive vehicles. A top drive vehicle is where you drive from a seat mounted above the cab of a vehicle. They steer from a shaft going down to the steering wheel or by hydraulic assist.