Kevin Carrillo
Diesel Mechanic
Edmond,OK
Summary
Experienced diesel mechanic with a focus on industrial engines, adept at understanding customer applications and needs. Possesses in-depth knowledge of industrial product lines and the horsepower requirements for diverse applications. Proven track record in engaging with customers, diagnosing issues, and defining key questions to provide tailored solutions. Skilled in troubleshooting through insightful questions about the engine's history and application, ensuring a comprehensive understanding of customer requirements for various jobs.
Overview
18
18
years of professional experience
5
5
years of post-secondary education
3
3
Certifications
Work History
Frac Shop Tech II
Warren CAT
03.2023 - Current
- Complete assigned jobs and task to meet flat rate times and re-do metric.
- Perform work in a shop setting.
- Understand and apply CAT reusability guidelines.
- Diagnose and troubleshoot problems, give recommendations for repairs and make all critical repairs and adjustments.
- Work safely and follow all WCAT safety policies and procedures.
- Complete related paperwork and access databases required to complete job (work order, parts order, JSA, DBS, SIMS, SIS web, STW) accurately and timely.
- Follow contamination control and HAZMAT rules and regulations.
- Remove and install parts, disassemble and assemble components, clean and inspect assemblies with minimal supervision on or around frac trailers / industrial equipment.
- Test and verify correct operation of all repairs and adjustments.
- Apply general failure analysis and procedures to determine proper diagnosis.
- Accurate and timely completion of service reports.
- Perform engine and component rebuild with limited supervision.
- Specific CAT product knowledge of gas, diesel, electrical, electronic, mechanical, and components.
- Flexibility to work overtime as needed.
- Proficient use of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes and rigging equipment.
- Ability to provide accurate quotes.
- Work experience and knowledge of diesel/gas engines, electrical, electronic, hydraulic, mechanical, pneumatic systems and components.
- Demonstrate work experience and general knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software, cranes, and rigging equipment.
- Use field experience and knowledge to assist out of shop tech.
- Kept detailed production records and identified hold-ups.
- Monitored machines during operation to detect sounds of malfunction or excessive vibration and adjusted machines to eliminate problems.
- Set up and ran machinery to produce exceptional products for industrial needs.
- Maintained equipment performance by lubricating and cleaning components.
- Calibrated, tested, and adjusted machine settings or controls in preparation for production operations.
- Operated machining equipment safely with team of operators.
- Complied with company and OSHA safety rules and regulations.
- Updated daily production logs and informed management of production incidents or non-conformance issues.
- Assessed equipment after each production run and performed preventive maintenance to keep machines running smoothly.
- Set up and adjusted equipment and properly configured machines for daily operation.
- Followed detailed instructions to operate machines with accuracy and produce quality products.
- Used precision measuring tools, micrometers and calipers to meet required product specifications.
- Replenished materials and supplies as needed to maintain production.
- Assembled products according to changing daily work orders and specific customer needs.
- Adjusted machines to increase productivity for runs.
- Calibrated machines to maintain required productivity levels and adherence to quality standards.
- Performed general equipment maintenance and repair to minimize downtime.
- Examined incoming materials and compared to documentation for accuracy and quality.
- Organized and prepared workstations and materials needed for operations to maximize productivity.
- Prepared reports and technical documentation of day-to-day production processes.
- Investigated processing errors and malfunctions, resolving issues with minor machine repairs.
- Tested products or subassemblies for functionality or quality and troubleshot problems with equipment, devices, or products.
- Maintained organized work area by cleaning and removing hazards.
Contractor/Owner
True North Mechanical Services
02.2022 - 10.2023
- Troubleshoot and diagnose engine, chassis, electrical, hydraulic, brake and body malfunctions
- Communicate with the operator on repairs, cost, and estimated time for repairs
- Purchase parts for repairs
- Remove and replace/repair with parts need to complete the job
- Work in a time-sensitive manner while obeying all OSHA and DOT laws and regulations
- Write a report of repairs completed, parts used and length of time for repairs to be completed in order to ensure proper billing of customers
- Maintain good housekeeping and tracking of all tools and equipment on the service truck
- Ability to speak effectively before customers.
- Utilizes understanding of engines, transmissions and their theories
- Performs PM services
- Follow all safety regulations and standards.
- Implemented changes requested by designers, owners, or inspectors to conform to specifications or updated demands.
- Kept site work safe and in line with budget, schedule, and applicable building codes.
- Consulted with customers to assess needs and propose optimal solutions.
- Optimized websites and mobile applications to achieve maximum performance.
- Researched and identified innovative solutions to acquire resources and meet customer needs.
- Generated detailed reports to highlight product performance and usage metrics.
- Negotiated fees and contracts to reach mutually beneficial agreements with clients.
- Managed day-to-day business operations.
- Evaluated suppliers to maintain cost controls and improve operations.
Fleet Maintenance Mechanic Supervisor
Scissortail Waste Solutions
04.2021 - 02.2022
- Schedule preventative maintenance services
- Establish relations and networking with vendors for fuel, lubricants, parts and third-party services
- Create shop safety and maintenance procedures guidelines
- Creating record jackets for all vehicles (major/minor repairs, pre-trip reports, annual inspections...etc.)
- Research parts, purchase parts and keep real time inventory of parts on hand along with repair cost and labor hours
- Mobile vehicle repairs, shop repairs including but not limited to computer diagnostics, electronic troubleshooting, hydraulic troubleshooting, brake system repairs and minor engine repairs
- Forecast Quarterly maintenance expense report
- Research, inspect and purchase new vehicles
- On site assessment of vehicle accidents and complete vehicle incident / damage report
- Perform capital improvements for the yard and facility.
- Diagnosed mechanical failures to determine and delegate corrective actions.
- Promoted workplace safety by examining tools and equipment and providing employee safety training to prevent unsafe conditions.
- Requisitioned materials and supplies such as tools, equipment and replacement parts.
- Completed diversified electrical work on automotive equipment such as servicing and installing batteries and terminals, repairing and adjusting lights and repairing generators and starters.
- Determined schedules and assignments of work activities for 12-member team, considering work priority, availability of equipment and skill of personnel.
- Arranged for customer billing by determining charges for services requested and collecting deposits or payments.
- Performed routine and scheduled maintenance services.
- Trained and coached junior employees on procedures for completing various types of repairs and maintenance on cars and light trucks.
- Wrote work orders and updated accounts in workshop computer.
- Maintained cleanliness, safety and efficiency of garage.
- Troubleshot and diagnosed faults with vehicle systems and components using OEM-specific code readers, diagnostic trees, and online knowledge bases.
- Utilized proper tools and materials to adhere to safety guidelines.
- Monitored safety compliance to maintain strict standards and protect team members from harm.
- Evaluated final results to determine quality levels and isolate root causes of any identified faults.
- Scheduled and oversaw maintenance, repair and installation activities.
- Monitored product quality and communicated necessary improvements to site superintendent.
- Optimized supply levels to keep stock within ideal parameters for expected needs.
- Kept watchful eye on equipment inventories, optimizing work readiness and aligning supplies with specifications for each job.
- Efficiently assisted service workers with problematic transactions to maintain customer satisfaction and quickly rectify issues.
- Created and maintained daily and weekly reports for upper management.
- Monitored systems to assure increase in power flow and integrated new system components, fixtures and motors.
- Monitored equipment, tools and system upgrades to compile data into detailed reports for upper management.
- Organized ongoing maintenance schedules to boost system performance.
- Monitored priorities and liaised between maintenance team and management, delegating tasks to complete on time.
Motor Vehicle Mechanic
PCSI - Tinker air force base
07.2019 - 04.2021
- Repairs, rebuilds, or overhauls major assemblies of automobiles, busses, trucks, tractors, refueling vehicles, military vehicles, LSV/OGMVC's, material handling equipment and special purpose equipment
- Inspects vehicles and equipment to determine the repairs required for the vehicle or equipment to meet the established serviceability standards
- Performs incoming inspections, outgoing inspections, Limited Technical Inspections, accident and abuse estimates in accordance with established standards
- Diagnosing the source of trouble and determining the extent of repairs required
- Replacing worn or broken parts such as piston rings, bearings, or other engine parts
- Repairing fuel injection, lighting and ignition systems.
- Prepared vehicles for rigorous treatment by monitoring fluid levels and performing preventive maintenance.
- Diagnosed engine, suspension, brake, transmission and other vehicle issues using extensive training and diagnostic equipment.
- Performed maintenance on vehicle fuel systems for both diesel and unleaded fueled vehicles.
- Worked on starting systems and electrical systems such as wiring harnesses, lights, batteries and communication systems.
- Inspected damaged vehicles to estimate repair labor cost and required parts expense.
- Checked brake systems and determined need of pad replacement, disc turning or other maintenance requirements.
- Investigated customer complaints to identify cause of malfunctions.
- Explained estimates and determined repair timelines to manage customer expectations.
- Serviced air conditioning systems, changed and topped off fluids and completed maintenance inspections.
Diesel mechanic
QES
12.2016 - 07.2019
- Inspect, analyze, test, measure, and repair equipment to company, federal and industrial standards
- Estimates materials, tools, and equipment needed for work assignments and orders
- Maintains records of repairs
- Understand, direct and implement understanding of electrical, hydraulics, PM, DOT inspections
- Test-run repaired equipment to ensure adequacy of repairs
- Performs, diagnoses and repairs a variety of equipment including; diesel engines, drive train components, winches, high pressure pumps, centrifugal pumps, sand conveyor systems, air compressors, microprocessor controls, electro-mechanical equipment, hydraulic systems, pneumatic systems, mobile/ overhead cranes, wellhead attachments and pressure equipment, gearboxes, PTO's, generators, chemical metering systems, 12/24v electrical systems, equipment cabs and controls, chassis and suspension, rims, tires and wheels, forklifts, A/C systems, and a variety of other energy services equipment.
Night mechanic supervisor/ day mechanic
Waste connections
08.2015 - 12.2016
- Diagnoses mechanical problems
- Supervisory skills knowledge including performance management and employee relations
- Performs repairs and maintenance on front-end loader, roll off, and other vehicles, machines or heavy equipment to maximize safe and productive operations
- Trains and assists Mechanics on methods for diagnosing and repairing vehicles and equipment
- Schedules or assigns work to Mechanics, PM Mechanics or other Maintenance Shop personnel
- Coordinates and/or transports vehicles to outside service for repairs, as needed
- Tests vehicles to troubleshoot problems and/or tests repairs to ensure proper and safe completion.
- Diagnosed mechanical failures to determine and delegate corrective actions.
- Promoted workplace safety by examining tools and equipment and providing employee safety training to prevent unsafe conditions.
- Performed routine and scheduled maintenance services.
- Delegated jobs to subordinates and monitored quality of work.
- Wrote work orders and updated accounts in workshop computer.
- Maintained cleanliness, safety and efficiency of garage.
- Evaluated final results to determine quality levels and isolate root causes of any identified faults.
- Scheduled and oversaw maintenance, repair and installation activities.
- Enhanced customer satisfaction ratings by motivating team members to strengthen quality and increase productivity.
- Monitored priorities and liaised between maintenance team and management, delegating tasks to complete on time.
- Shrunk knowledge gaps with ongoing training and close employee mentoring for new and less experienced team members.
- Kept watchful eye on equipment inventories, optimizing work readiness and aligning supplies with specifications for each job.
- Monitored daily progress and work quality to provide guidance and direction to mechanics and installers.
- Completed full vehicle inspections to check for leaks, damage, or other issues of concern.
- Replaced damaged, missing, or defective parts with new and refurbished components.
- Monitored product quality and communicated necessary improvements to site superintendent.
- Ordered repair parts quickly to prevent delays in projects and repair work.
- Inspected and tested equipment to locate worn and damaged parts.
- Kept equipment in good working order by following operating instructions, troubleshooting breakdowns, and maintaining supplies.
- Disassembled defective parts to make proper repairs.
- Implemented tracking systems to monitor parts inventory and transactions to reduce discrepancies.
- Serviced air conditioning systems, changed and topped off fluids and completed maintenance inspections.
- Performed emissions tests according to standard procedures.
Engine Field Tech II
Warren CAT
04.2014 - 08.2015
- Troubleshoot and diagnose DGB (duel gas blend) generators and engines
- Repair, maintain, and update naturally aspirated, gasoline and diesel engines
- Make determinations in the field on warranty repair and guidelines, communicating decisions to customer and dispatcher
- Reads, understands and applies electrical and hydraulic schematics to repair work
- Perform overheads, top jobs, in frame and natural gas conversions
- Maintain inventory of parts ordered for jobs, keep in contact with customers to maintain a good healthy relationship and to have repeat business
- Troubleshoot with customers over the phone, find out specific engine issues to properly diagnose engine faults.
- Operated hand tools and power equipment according to company safety procedures.
- Discussed and recommended service options with customers and explained costs involved.
- Reviewed technical documentation to complete equipment maintenance and repair.
- Followed safety procedures to avoid injuries in field.
- Reviewed aspects of job upon completion to alleviate equipment failure and prevent callbacks.
- Interpreted equipment diagrams and blueprints to fully understand mechanical and electrical systems in need of service.
- Developed and implemented customized service plans to meet customer needs.
- Responded quickly to emergency maintenance requests for timely on-call support.
- Established positive customer relationships by providing punctual, cost-effective solutions.
- Detected and repaired machinery faults using electrical and manual testing methods.
- Followed instructions from supervisor regarding daily job tasks and duties.
- Performed preventive maintenance and repairs on various types of equipment.
- Continuously adhered to strict regulations as well as detailed instructions, guidelines and specifications.
- Executed tasks within time and budget constraints.
Seabee Construction Mechanic Second Class
US. NAVY
04.2006 - 04.2014
- Participated as Hazardous Waste Coordinator and acted as liaison between Navy and Army personnel for the pickup and disposal of hazardous waste
- Fabricated paperwork for individual pieces personally, picked equipment for the completion of a 90-day BEEP, ensuring the 32 pieces of CESE were mission ready
- Worked as a Maintenance Material Management Clerk for 32 pieces of naval construction equipment valued at over $4M
- Sanded and spray-painted vehicles for cosmetic purposes and rust removal
- Worked with hazardous materials and properly disposed of generated hazardous waste.
Diesel Mechanic Shop/Field Trainer
Performance Technologies
09.2011 - 03.2014
- Train new field mechanics on proper procedures such as but not limited to; field repairs, parts order, safety regulations, inspections, CAT and Cummins computer diagnostic software and general maintenance operations
- Performs annual vehicle inspections, performs preventative maintenance based on predefined schedules and routinely inspects parts for defects
- Installs specified new or reconditioned parts such as relined brake pads and clutch pads, sprocket, pump cylinders for engines and pumps
- Performs brake jobs including air brake overhauls, measure brake lining thickness, drums, SCams replacements, bushings, slack adjusters, and replacing relay valves and air tanks.
- Performed preventive maintenance on engines, transmissions, tires, and other vehicle systems.
- Troubleshot and diagnosed problems with brakes, steering, and transmissions.
- Documented findings and actions taken.
- Used specialty equipment, standard tools, and gauges to complete assessments and repairs.
- Completed checklist of fluid levels, air filter, tire pressure, and more as part of service orders.
- Inspected vehicle systems to assess function and uncover defects.
- Tested and adjusted engines to foster proper performance.
- Utilized hand tools and power tools to repair and maintain diesel engines according to industry standards.
- Inspected and adjusted brakes, steering systems and wheel bearings to address related issues.
- Installed and adjusted fuel injection systems and turbochargers to enhance vehicle performance.
- Diagnosed and repaired diesel engines to restore functionality in heavy-duty vehicles.
- Assessed equipment for damage, wear, battery life, and fluid levels.
- Diagnosed mechanical problems for repair or replacement.
- Managed parts inventory and tracked status of recent orders to maintain tool and equipment stock.
- Collaborated with other mechanics to inspect diesel engines for signs of damage.
- Provided coaching and mentoring to employees.
- Proven ability to learn quickly and adapt to new situations.
Education
Oklahoma City Community College
Oklahoma City, OK 08.2016 - 06.2017
undefined
Construction Mechanic 'A' School
Port Hueneme, CA 08.2006 - 10.2006
undefined
High school diploma
Cypress, CA 09.2000 - 06.2004
Skills
undefined
Certification
Driver's License
Military Service
United States Navy, E5
Work Authorization
Authorized to work in the US for any employer
Personal Information
Willing To Relocate: Anywhere
Timeline
Frac Shop Tech II
Warren CAT
03.2023 - Current
Contractor/Owner
True North Mechanical Services
02.2022 - 10.2023
Fleet Maintenance Mechanic Supervisor
Scissortail Waste Solutions
04.2021 - 02.2022
Motor Vehicle Mechanic
PCSI - Tinker air force base
07.2019 - 04.2021
Diesel mechanic
QES
12.2016 - 07.2019
Oklahoma City Community College
08.2016 - 06.2017
Night mechanic supervisor/ day mechanic
Waste connections
08.2015 - 12.2016
Engine Field Tech II
Warren CAT
04.2014 - 08.2015
Diesel Mechanic Shop/Field Trainer
Performance Technologies
09.2011 - 03.2014
undefined
Construction Mechanic 'A' School
08.2006 - 10.2006
Seabee Construction Mechanic Second Class
US. NAVY
04.2006 - 04.2014
undefined
High school diploma
09.2000 - 06.2004
Similar Profiles
Judah KucharyskiJudah Kucharyski
Warehouse Associate at Warren CATWarehouse Associate at Warren CAT
Alondra GarciaAlondra Garcia
Adminastrative Assistant at Warren CatAdminastrative Assistant at Warren Cat
Sam BartholomaeSam Bartholomae
Machine Service Manager at Warren CATMachine Service Manager at Warren CAT
Ian PenaIan Pena
Yard Specialist at Warren CATYard Specialist at Warren CAT
JAMES MELLOJAMES MELLO
Executive Commercial Account Manager at ADT Security Services LLCExecutive Commercial Account Manager at ADT Security Services LLC