Korey Moye
Broken Arrow,Oklahoma
Summary
Precise Aircraft Cleaner with experience efficiently cleaning and organizing interior of aircraft. Skilled at carrying out tasks such as spraying cleaning solution, wiping surfaces, restocking restroom supplies and removing trash. Self-sufficient and independent with talent for working with minimal supervision. Committed job seeker with a history of meeting company needs with consistent and organized practices. Skilled in working under pressure and adapting to new situations and challenges to best enhance the organizational brand. Meticulous AMT in training, learning to execute aircraft repair and maintenance on various models. Currently Finishing school to acquire my FAA Airframe and Powerplant licensed, by doing so, demonstrates success in completing repair and installation work with efficiency and accuracy.
Overview
1
1
year of professional experience
Work History
Aircraft Cleaner
American Airlines
Tulsa , OK
01.2023 - Current
- I current work at American Airlines as an aircraft cleaner.
- Used specialized cleaners to remove dirt buildup on windows and plastic surfaces inside the plane's cabin area.
- Performed interior and exterior cleaning of aircrafts, including windows, walls, carpets, seats and lavatories.
- Maintained safety regulations for the protection of passengers and crew members during the cleaning process.
- Applied protective coatings to preserve the appearance of painted surfaces on airplanes .
- Dusted all interior parts such as bulkheads, sidewalls, ceiling panels, tray tables.
- Cleaned airplane exteriors including wings, tail sections and fuselage using water hoses or pressure washers .
- Reported any damages or repairs needed to supervisor immediately.
- Ensured that all cleaning supplies were properly stored after use.
- Inspected cabin facilities daily to ensure they met quality standards.
- Maintained a log of all services performed during each shift.
- Adhered to safety protocols while working around hazardous materials like bleach or ammonia-based products.
- I am currently in school for A&P license
- Assisted in troubleshooting malfunctions in engines and other mechanical systems.
- Installed fuel tanks, landing gear assemblies, exhaust systems, and other components.
- Performed routine maintenance tasks on aircraft, such as cleaning, lubricating, and replacing parts.
- Conducted pre-flight inspections to determine if aircraft was ready for flight operations.
- Applied corrosion preventive treatments during regular maintenance checks.
- Replaced worn out engine components with new ones according to manufacturer's specifications.
- Determined the cause of system failures using diagnostic equipment such as oscilloscopes and multimeters.
- Diagnosed problems related to avionics systems such as autopilot control units and navigation computers.
- Checked serviceability of brakes, tires, and other landing gear components prior to takeoff.
- I have worked for Walmart for 10 years.In that time I have gained experience in shipping and receiving inventory. While I worked for Walmart I gained years of experience using heavy power equipment such as an walkie stacker, electric Jack, scissor lift and forklift. Performed regular audits of warehouse materials to identify discrepancies between physical stock and digital records.
- Maintained records of all maintenance activities for compliance with FAA regulations.
- Cleaned up hazardous materials from work areas following safety guidelines.
- Tested electrical systems, hydraulic systems, and other aircraft components for proper functioning.
- Adjusted engine controls to ensure optimal performance of the aircraft.
- Inspected aircraft components to detect any signs of wear or malfunctioning.
- Ensured that all necessary tools were available before starting any repair job.
- Used specialized tools such as torque wrenches and micrometers for precise measurements.
- Followed detailed instructions while conducting complex repairs on the aircraft.
- Repaired damaged airframes and wing assemblies using hand tools and power tools.
- Removed aircraft parts such as engines, pumps and landing gear.
- Performed troubleshooting procedures to find root causes of faults.
- Completed scheduled and unscheduled safety and performance assessments.
- Assembled and installed mechanical, hydraulic and structural components and accessories using appropriate tools.
- Performed maintenance services such as lubricating components.
- Recommended replacement, repair or modification of aircraft equipment based on inspection.
- Managed repair logs, documenting preventive and corrective aircraft maintenance activities.
- Inspected completed work to certify that maintenance adhered to standards and procedures.
- Researched, read and interpreted technical manuals and guidelines before inspections, installations and repairs.
- Serviced and maintained aircraft systems, flushing crankcases, cleaning screens and greasing moving parts.
- Disassembled and inspected engines and components for wear, breaks or other deficiencies.
- Requested aviation parts and supplies before scheduled repairs to meet inventory needs.
- Reported issues, malfunctions, unusual wear, or damage to appropriate personnel.
- Utilized drawings and schematics to install, remove and modify aircraft structures, systems and components.
- Interpreted logs to understand issue history and nature, troubleshoot faults and identify next steps.
- Performed troubleshooting and diagnostic procedures to locate source of malfunctions.
- Maintained aircraft environmental systems, oxygen systems, fire extinguishing systems and utility systems.
- Updated maintenance and repair logs according to services performed and submitted reports to supervisors for review.
- Inspected and verified dimensions and clearances of parts to verify conformance to factory specifications.
- Adjusted and repaired systems to meet manufacturers' performance specifications.
- Planned work procedures using charts, technical manuals and experience.
- Utilized hand and power tools to detect and repair aircraft malfunctions and damages.
- Reviewed work orders and discussed with supervisors.
- Used diagnostics and troubleshooting tools to identify failures and equipment issues.
- Disassembled units and inspected parts for wear with micrometers, calipers and gauges.
- Completed standard inspections to assess wear and damage to vehicles.
- Repaired and serviced air conditioning, heating and electrical systems.
- Disassembled and overhauled internal combustion engines, pumps and generators.
- Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
- Inspected aircraft systems for routine maintenance and repairs.
- Performed scheduled and unscheduled aircraft maintenance tasks.
- Diagnosed and repaired aircraft mechanical issues efficiently.
- Conducted thorough pre-flight and post-flight inspections.
- Maintained accurate records of completed maintenance work.
- Replaced damaged or worn parts in aircraft systems.
- Ensured compliance with FAA regulations and safety guidelines.
- Operated ground support equipment during aircraft servicing.
- Collaborated with team members to troubleshoot complex problems.
- Utilized precision tools for accurate measurements and adjustments.
- Installed, tested, and calibrated avionic components in aircrafts.
- Analyzed test results to identify repair needs quickly.
- Interpreted technical manuals to perform proper procedures.
- Executed corrosion control measures on various components.
- Adjusted flight control surfaces ensuring optimal performance.
- Rigged cables, linkages and hydraulic components.
Education
Electrician Engineering -
Penn Foster
05.2024
Bachelors of Science and Technology - Networking/logistics
University Of Phoenix
01.2020
Program CCNA and CCNP in Networking -
Tulsa Technology
05.2013
A&P - Avionics Maintenance Technology
Tulsa Technology Center Riverside Campus
Jenks, OKSkills
- Detail oriented
- Logistic
- Well-versed in warehouse work and procedures
- Excellent written and oral communication skills
- Develops positive workplace relationships
- Critical thinking and Problem solving skills
- Computer literacy
- Microsoft office suites
- Familiarity with plane exterior
- Safety Procedures
- Cleaning equipment operations
- Technical document reading
- Understanding of FAA requirements
- Chemical Handling
- Problem-solving abilities
- Organizational abilities
Timeline
Aircraft Cleaner
American Airlines
01.2023 - Current
Electrician Engineering -
Penn Foster
Bachelors of Science and Technology - Networking/logistics
University Of Phoenix
Program CCNA and CCNP in Networking -
Tulsa Technology
A&P - Avionics Maintenance Technology
Tulsa Technology Center Riverside Campus
Similar Profiles
Crystal Michelle BarayCrystal Michelle Baray
MSR Bank Secrecy Act - Compliance at American Airlines, American Airlines HDQMSR Bank Secrecy Act - Compliance at American Airlines, American Airlines HDQ
Sue RobinsonSue Robinson
Sr Specialist, HRIS Business Process at American Airlines, American Airlines HDQSr Specialist, HRIS Business Process at American Airlines, American Airlines HDQ
Jilleian K. Sessions-StackhouseJilleian K. Sessions-Stackhouse
Human Resources Sr. Specialist, Policy at American Airlines, American Airlines HDQHuman Resources Sr. Specialist, Policy at American Airlines, American Airlines HDQ
CRYSTAL FENNELCRYSTAL FENNEL
Airline-customer-service-agent/ Airline-Ramp Agent at US Airways American Airlines Piedmont AirlinesAirline-customer-service-agent/ Airline-Ramp Agent at US Airways American Airlines Piedmont Airlines
David FullerDavid Fuller
Construction Manager at JTR Construction & Maintenance, LLCConstruction Manager at JTR Construction & Maintenance, LLC