Summary
Overview
Work History
Education
Skills
Certification
Personal Information
References
Timeline
Generic

Kris Hareide

Temple Terrace,FL

Summary

Experienced Level II NDT professional proficient in gathering, reviewing and reporting on inspection information. Successful at completing both visual and physical inspections to evaluate compliance. Ready to apply 6 years of experience and take on new long-term position. Currently Studying to take the ASNT Level III Exams in Basic, VT, PT and MT, Interested in learning new NDT Methods as well as gaining any new understanding of the current methods I am currently actively certified in.

I also bring 12 plus years of experience working in the ship repair industry. Trained in outside machining, engine, and CPP repair. As Q.A. Inspector with a level II certificate for M.T., P.T. and V.T. during that time I assumed the roles of Leadman, Foreman and superintendent, Seeking employment to utilize and build upon these areas of my expertise. I am a TWIC Cardholder.

Overview

20
20
years of professional experience
1
1
Certification

Work History

Quality Inspector III

CIRCOR
Temple Terrace, FL
08.2020 - Current
  • Reviewed and inspected products for conformance to established standards, specifications and customer requirements.
  • Conducted dimensional checks with various measuring instruments including micrometers, calipers and gauges.
  • Checked product accuracy against blueprints and drawings.
  • Reported any nonconforming parts to Quality Manager or Production Supervisor.
  • Monitored production process to ensure quality control standards are met at all times.
  • Maintained accurate records of inspection results and corrective actions taken when necessary.
  • Investigated complaints regarding product quality and recommended changes in process or design to prevent recurrence.
  • Assisted in the development of new processes or procedures related to quality assurance activities.
  • Collaborated with other departments on improvement projects related to quality assurance initiatives.
  • Provided technical support to production staff regarding quality issues.
  • Verified incoming material was properly labeled, identified and stored according to specified requirements.
  • Inspected packaging for completeness, correctness and damage prior to shipping out orders.
  • Developed training programs for new employees on proper inspection techniques.
  • Identified root causes of defective parts through analysis of data from internal audits, inspections, tests.
  • Attended regular meetings with management team members to discuss current status of quality control efforts.
  • Participated in continuous improvement projects aimed at improving overall product quality.
  • Created detailed work instructions for inspectors on how to perform their tasks correctly.
  • Identified and resolved quality issues, escalating critical problems to supervisors.
  • Documented, filed and maintained proper inspection records and quality assurance documents.
  • Assessed finished items for defects and ordered reworks to eliminate irregularities.
  • Completed evaluations by properly using various gauges, tools and equipment.
  • Inspected, tested and measured materials, products and installations against specifications.
  • Inspected and repaired products to meet project expectations.
  • Recommended corrective actions to minimize rate of product defects.
  • Trained Inspectors to perform and document quality inspections and audits.
  • Trained newly hired employees by explaining company procedures, job duties and performance expectations.
  • Completed non-destructive tests and conducted continuous inspections.
  • Performed Casting Inspections on incoming parts as well as after machining.
  • Performed VT, PT and MT of various parts and assemblies of welded and non-welded components.
  • Performed NDT inspections of welds using liquid penetrant and magnetic particle testing techniques.
  • Conducted visual examinations of assemblies, subassemblies and components.
  • Provided technical support to other personnel on NDT methods and procedures.
  • Assisted in the development of new NDT methods or techniques when required.
  • Trained other employees on proper use of NDT equipment and techniques.
  • Collaborated with engineering staff on proposed design changes prior to implementation.
  • Provided necessary guidance, training and supervision to NDT trainees and Level I certified personnel.
  • Trained personnel to use NDT equipment and devices and wrote documentation to support training.
  • Reviewed and analyzed work scope for each job prior to beginning testing to verify familiarity and resultant proper testing.
  • Inspected equipment and quickly identified issues, contacting appropriate personnel to schedule repairs.
  • Reviewed testing procedures on regular basis to verify compliance of each step with safety standards and regulations.
  • Maintained effective communication, both in writing and verbally, with all project stakeholders to promote open collaboration and enhance goal attainment.

Outside Machinist Lead

Gulf Marine Repair
Tampa, FL
05.2020 - 08.2020
  • Installed shafts, bearings, seals, gears and other parts to specifications.
  • Dismantled machinery and equipment in order to perform maintenance activities.
  • Used precision measuring instruments such as height gages, depth gages, calipers and various types of micrometers.
  • Rebuild Controllable Pitch Propellers

  • Inspected and tested all machinery components to ensure proper functionality.
  • Replaced faulty parts such as bearings, gears, and shafts in a timely manner.
  • Aligned motors, pumps, gearboxes, conveyors and other mechanical systems.
  • Troubleshot problems with hydraulic systems and pneumatics.
  • Reassembled machines after repair work was completed.
  • Ran tests on newly installed machines to verify their optimal functioning.

Quality Assurance Inspector

International Ship Repair
Tampa, FL
01.2017 - 04.2020
  • Certified Welding Inspector, Certified in Visual Testing(V.T.), Dye Penetrate Testing(P.T.) and Magnetic Particle Testing(M.T.)
  • Preformed Fit Up, Back gouge, and Final Weld Inspections on steel to make sure it was within tolerance to industry standards.
  • Load test Cranes, Wenches, davits, Pad eyes and various other lifting devices.
  • Pressure test Tanks, Pipes, Valves, Pressure/vacuum valves, Pressure relief Valves and various other systems or pressure vessels.

Outside Machinist/leadman

International Ship Repair
Tampa, FL
12.2009 - 01.2017
  • Disassembly and reassembled of Control Pitch Propellers.
  • Rebuild and repair Bow Thrusters.
  • Remove and reinstall rudders.
  • Removal of hydraulic propeller, couplings and rudders.
  • Remove, disassemble, clean, inspection and rebuild valves.
  • Take and record clearance of rudders and tail shafts.
  • Check and correct alignment of various pumps, motors, gearbox's any other machinery.
  • Removal of anchor chain record readings replace shots below tolerance.
  • Removal and Installation of various types of tail shafts and rudder bearings.
  • Removal and reinstall ICon pins.
  • Repair Z-drive
  • Adjusted alignment of drills, cutters, dies, guides, and holding devices.
  • Assisted machine operators with finished pieces.
  • Collated components for assembly.
  • Maintained necessary level of communications between shifts.
  • Fabricated large and small parts per drawing and assembled parts as required.
  • Responsible for achieving production requirements.
  • Ensured that all health and safety guidelines were followed.
  • Monitored product standards and quality-control programs.
  • Prepared and maintained production reports and personnel records.
  • Set and monitored product standards, examining samples of raw products and processing tests, to ensure the quality of all finished products.
  • Supervised and motivated staff and management.
  • Tested products or subassemblies for functionality or quality.
  • Made and revised set ups on test strands previously calibrated by other staff.
  • Disassembled, reassembled and corrected changeover.
  • Repainted and precisely touched-up components and assemblies.
  • Built containers and pack parts in accordance with detailed packing specifications.
  • Recognized and reported defective material and equipment to shift supervisor.
  • Aligned motor, air end and coupling using calipers, dial indicators and straight edges.
  • Installed protective devices such as bracing, padding, or strapping to prevent shifting or damage during shipping.
  • Correctly and safely used a variety of hand tools, saws and cutting equipment to carry out job duties.
  • Worked directly from blueprints, patterns, sketches and specifications.
  • Operated heavy duty lathes, boring machines and mills, planers, shapers, and grinders.
  • Overhauled heavy machinery such as pumps, fans, governors, and gear reducers.
  • Operated forklifts, hoists and other material handling equipment.
  • Adhered to all safety protocols and safe work practices to reduce likelihood of injury.
  • Studied blueprints, work instruction, sketches, drawings, and manuals to determine dimensions, and tolerances.
  • Detected and reported malfunctions and out-of-tolerance machining.
  • Interpreted drawings and planed work in proper operational sequence on multi-cut jobs.
  • Removed burrs on all machined parts.
  • Lubricated parts and performed minor maintenance to improve machine function.
  • Accurately read, understood, and carried out written instructions.
  • Employed wide variety of hand and power tools including hoists, drills, precision measuring instruments and electronic testing devices.
  • Inspected machine parts for conformance to product specifications.
  • Followed company procedures to maintain work environment in a neat and orderly condition.
  • Used hand tools to change worn cutting tools.
  • Used hoists and cranes to lift work pieces to machine.
  • Used precision measuring instruments, templates, and fixtures to measure dimensions of finished work pieces.
  • Used schematic diagrams to plan work.
  • Installed, aligned, and balanced new equipment.
  • Followed standards and procedures to maintain safe work environment.
  • Informed supervisors when machines needed major service.

Diesel Tech

Chris Marine U.S.A
Jacksonville, FL
01.2006 - 08.2008
  • Adjusted alignment of drills, cutters, dies, guides, and holding devices.
  • Assisted machine operators with finished pieces.
  • Tested products or subassemblies for functionality or quality.
  • Disassemble heads, clean parts, test, machine parts, reassemble heads, prepare for shipment.
  • On site repair on ship engines.

Installer

Britta construction
Jacksonville, FL
05.2004 - 12.2005
  • Installation of weatherproofing on houses

Education

Skills

  • Hard working
  • Good team worker
  • Skilled/Well Trained
  • Excellent attention to detail
  • Trained to take and record Micrometer readings
  • Highly regarded leadership
  • Calipers
  • Precision Measuring Instruments
  • Quality Inspection
  • Assembly
  • Mechanic Experience
  • Blueprint Reading
  • Quality Assurance
  • Mechanical Knowledge
  • Supervising Experience (2 years)
  • Precision Measuring
  • Welding Inspection
  • Casting Inspection
  • Receiving Inspection
  • First Article Inspection
  • Continuous Improvement
  • Manufacturing Process Improvement
  • Keen eye for detail
  • Strong mechanical aptitude
  • Prior experience with MSDSs
  • Visual Inspection
  • Measuring skills
  • Defect Identification
  • Non-Destructive Testing
  • Inspections and audits
  • Six Sigma Methodologies
  • Problem-Solving
  • Code Compliance
  • Troubleshooting skills
  • Adaptability and Flexibility
  • Multitasking

Certification

  • NDT Level II VT, 10/2017, 10/2024, Visual Testing Level 2 within the requirements of ASNT SNT-TC-1A, Original Certificate 2017 last Re-certification September 2023
  • NDT Level II PT, 10/2017, 10/2024, Liquid Penetrant Level 2 within the requirements of ASNT SNT-TC-1A. Original Certificate 2017 last Re-certification September 2023
  • NDT Level II MT, 10/2017, 10/2024, Magnetic Particle Level 2 within the requirements of ASNT SNT-TC-1A. Original Certificate 2017 last Re-certification April 2021
  • Lean Sig Sigma Green belt, 02/2024

Personal Information

Work Permit: Authorized to work in the US for any employer.

References

References available upon request.

Timeline

Quality Inspector III

CIRCOR
08.2020 - Current

Outside Machinist Lead

Gulf Marine Repair
05.2020 - 08.2020

Quality Assurance Inspector

International Ship Repair
01.2017 - 04.2020

Outside Machinist/leadman

International Ship Repair
12.2009 - 01.2017

Diesel Tech

Chris Marine U.S.A
01.2006 - 08.2008

Installer

Britta construction
05.2004 - 12.2005

Similar Profiles

CREATE PROFILE
Kris Hareide