Larry Gilbert Jr.
LOOGOOTEE,Indiana
Summary
Hardworking HVAC professional offering proven history in managing residential, commercial and industrial HVAC needs with skillful and efficient repairs. Adept at testing and inspecting systems to isolate faults and implement repair plans. Effectively align systems to meet manufacturer specifications and maximize performance.
Overview
4
4
years of professional experience
1
1
Certification
Work History
Hvac Maintenance Mechanic Apprentice
French Lick West Baden Resort
8670 IN-56, French Lick, IN 47432
08.2022 - 10.2022
- Took advantage of opportunities to learn new systems and repair procedures.
- Observed senior mechanics completing major repairs.
- Cleared work areas of debris and organized supplies to maintain safety and appearance.
- Identified major problems with system and notified supervisor before ordering replacement parts.
- Attended training offered by company to keep updated on new methods and improve skills.
- Reviewed work orders and discussed with supervisors.
- Replaced and installed new machinery, equipment and parts.
- Tended to machines, troubleshot malfunctions and completed basic repairs to keep equipment fully functional and well-maintained on over 300 units.
- Tested systems, noting issues and completing preventive maintenance.
- Diagnosed and repaired problems with electrical and mechanical systems.
- Followed established procedures for inspection of belts, drives and motors, performing needed maintenance.
- Maintained strong focus on safety and efficiency to provide comprehensive support to personnel performing skilled repairs.
- Performed troubleshooting on HVAC systems to determine root cause of issues.
- Conducted maintenance service on HVAC systems to increase life expectancy of equipment and prevent costly repair work.
- Investigated major malfunctions and breakdowns of heating and air-conditioning systems and used troubleshooting to determine causes.
- Repaired and replaced motors, bearings and belts.
- Kept accurate records of time and materials used for each job to compile into service reports.
- Worked overtime, holidays and weekends to accommodate company needs.
- Inspected and tested refrigeration systems, safety devices and controls to determine proper functionality.
- Filled out detailed work orders for each job completed.
- Read blueprints, wiring diagrams, piping schemes and engineering specifications to diagnose and repair units.
- Closed out work orders after verifying completion with customers and reporting discrepancies discovered on job site.
- Maintained 8 boilers, 4 hot water systems, gas heating equipment and all food service equipment.
- Replaced bearings, pump seals and packing.
- Surveyed building layout and gathered materials before beginning repairs.
- Worked well in a team setting, providing support and guidance
- Skilled at working independently and collaboratively in a team environment
- Passionate about learning and committed to continual improvement
- Organized and detail-oriented with a strong work ethic
- Adaptable and proficient in learning new concepts quickly and efficiently
- Used critical thinking to break down problems, evaluate solutions and make decisions
- Participated in team projects, demonstrating an ability to work collaboratively and effectively
- Identified issues, analyzed information and provided solutions to problems
Service Technician
ER Mechanical And Jewell Contracting
Washington, IN
04.2021 - 11.2021
- Diagnosed and troubleshot problems, repairing, and restoring machines to peak performance.
- Responded to customer inquiries quickly and professionally to increase satisfaction.
- Installed new equipment and explained operation and routine maintenance protocols to customers.
- Inspected equipment to diagnose operational issues.
- Maintained accurate records of service calls and customer interactions for training and accountability purposes.
- Explained diagnostic findings to customers and outlined repair or service options.
- Diagnosed and repaired problems with electrical and mechanical systems.
- Worked with diverse types of weather and ground conditions.
- Demonstrated to customers proper methods for operating equipment after it had been installed.
- Installed new equipment and explained operation and routine maintenance protocols to customers.
- Responded quickly to emergency maintenance requests for timely on-call support.
- Reviewed technical documentation to complete equipment maintenance and repair.
- Completed partial or full dismantling of equipment to quickly repair or replace defective components and restore functionality.
- Established positive customer relationships by providing punctual, cost-effective solutions.
- Discussed and recommended service options with customers and explained costs involved.
- Reviewed aspects of job upon completion to alleviate equipment failure and prevent callbacks.
- Interpreted equipment diagrams and blueprints to fully understand mechanical and electrical systems in need of service.
- Developed and implemented customized service plans to meet customer needs.
- Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
- Installed electrical wiring through conduits and holes in both flooring and walls.
- Installed electrical conduit and wiring for power, controls, and lighting.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
- Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
- Disconnected and removed motors and pumps.
- Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
- Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
- Estimated numerical length of runs during new service installations.
- Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
- Used surveying equipment to grade and measure land profiles before installation of electrical systems.
- Loaded and unloaded heavy objects, dirt and other materials on-site.
- Dug ditches and trenches using trench rollers, rammers and shovels for small-scale excavations.
- Operated excavator to dig on and around live utilities in underground or telecom utility fields.
- Employed safe digging practices in line with machine capabilities and limitations to prevent hazards.
- Checked to make sure that trench excavations met correct depth.
- Followed markers, work instructions and hand signals to complete accurate work.
- Utilized hammers, saws, squares, levels, and fastening devices to complete projects.
- Assisted with basic carpentry work such as installing wooden floors and crown molding.
- Installed new structures, updated systems and replaced worn components to bring buildings up to current codes.
- Measured dimensions of finished pieces for conformance to specifications.
- Installed drywall, flooring and other interior finishes to create finished and functional living and work spaces.
- Followed blueprints and diagrams to complete projects according to specifications.
Power Equipment Maintenance Technician
Jasper Rubber
1010 W 1st Ave, Jasper, IN 47546
01.2020 - 04.2021
- Operated varied hand and power tools to complete repairs.
- Troubleshot equipment breakdowns and performed preventive maintenance.
- Used problem-solving skills to alleviate issues efficiently with minimal supervision.
- Followed work orders and specifications for machine and equipment replacement, repair, or maintenance.
- Followed safety protocols to minimize workplace accidents.
- Completed daily, weekly, and monthly checklists on building equipment to maintain records of scheduled maintenance procedures.
- Inspected and maintained equipment to keep items in top working condition.
- Monitored and documented work performance in maintenance logs in compliance with company guidelines.
- Performed electrical and mechanical repairs of production equipment to minimize downtime.
- Completed partial or full dismantling of equipment to quickly repair or replace defective components and restore functionality.
- Worked with building managers to assess ongoing needs and plan preventive maintenance and cleaning schedules.
- Followed instructions from supervisor regarding daily job tasks and duties.
- Developed and implemented strategies to improve maintenance processes.
- Performed preventive maintenance and repairs on various types of equipment.
- Replaced worn or broken parts on machines and equipment.
- Utilized variety of tools and test equipment to troubleshoot and diagnose equipment malfunctions.
- Repaired and replaced pumps, valves and motors.
- Conducted regular inspections of equipment to promptly identify issues that could cause machinery malfunctions.
- Executed tasks within time and budget constraints.
- Rewired and replaced faulty electrical components in equipment.
- Inspected, tested and adjusted mechanical and electrical systems to facilitate proper functioning.
- Detected and repaired machinery faults using electrical and manual testing methods.
- Safely and effectively handled wide range of cleaning products and solutions.
- Continuously adhered to strict regulations as well as detailed instructions, guidelines and specifications.
- Diagnosed and repaired complex mechanical and electrical systems.
- Optimized work readiness with effective gathering of parts and supplies in alignment with specifications.
- Installed and maintained plumbing and HVAC systems.
- Quickly responded to internal service calls regarding malfunctioning equipment and completed repairs.
- Adjusted valves and controls to set specified water level and steam pressure of boiler.
- Monitored heating and cooling system performance through alarms, temperature and pressure differentials.
- Observed pressure, temperature and draft meters to verify correct operation of automatic combustion control systems, feed water regulators and burners.
- Observed boiler and auxiliary units to detect malfunctions, change burners and tighten pipes and fittings.
- Maintained boiler room log by recording meter and gauge data readings, water test results and quantity of fuel consumed.
- Used chemical testing kits and oxygen scavengers to test and treat boiler feed water.
- Used automatic gas feeds and pumps to fire gas-fed boilers.
- Verified appropriate degree of water softness by maintaining chemical treatment programs and regulating steam flow.
- Scheduled and assigned preventive maintenance for boiler and mechanical equipment.
- Completed boiler testing and adjusted chemical usage daily as part of preventive maintenance on machines to enhance production and maintain quality.
- Inspected systems, equipment and components to determine maintenance needs.
- Oversaw start-up, operations and shutdown procedures.
- Worked with large HVAC systems such as boilers, chillers and furnaces.
- Conducted preventive, corrective and predictive maintenance actions.
- Analyzed problems and took appropriate action to maintain continuous and reliable operation of equipment and systems.
- Collected and tested water samples from cooling towers and other systems.
- Skilled at working independently and collaboratively in a team environment.
- Operated hoists, cranes and power tools to disassemble devices and remove defective parts.
- Utilized troubleshooting tools and schematics to identify parts needing repair.
- Performed regular inspections and regularly lubricated machinery.
- Read blueprints and schematic drawings of machinery to determine appropriate procedures and necessary supplies.
- Measured parts with rulers, calipers and micrometers to determine changes in dimensional requirements.
- Performed root-cause analysis on defective components, disassembling them to identify issues and completing necessary repairs.
- Calibrated and adjusted machinery for operational consistency.
- Conducted routine maintenance and inspections to identify and address mechanical issues.
- Installed, calibrated and tested new or repaired parts and equipment.
- Cleaned, lubricated and calibrated machinery components to maintain peak operating performance.
- Conducted preventative maintenance on heavy equipment, such as lubrication, checking fluids and replacing worn parts.
- Replaced worn or defective parts and adjusted settings to improve performance.
- Used hand and power tools to repair and maintain industrial machinery.
- Observed and tested operation of machinery or equipment to diagnose malfunctions using voltmeters or other testing devices.
- Diagnosed equipment issues by analyzing error messages and testing results.
- Analyzed blueprints and manufacturer instructions to take apart and reassemble machinery for maintenance and component replacements.
- Read and interpreted schematics, diagrams and blueprints to follow specifications in maintaining industrial machinery.
- Utilized computerized analytical software to detect potential mechanical problems.
Service Technician
D&S Services LLC
Loogootee, IN
04.2019 - 09.2021
- Diagnosed and troubleshot problems, repairing, and restoring HVAC systems to peak performance.
- Responded to customer inquiries quickly and professionally to increase satisfaction.
- Installed new equipment and explained operation and routine maintenance protocols to customers.
- Inspected equipment to diagnose operational issues.
- Explained diagnostic findings to customers and outlined repair or service options.
- Adhered to safety protocols and policies to reduce workplace hazards.
- Maintained accurate records of service calls and customer interactions for training and accountability purposes.
- Responded to problems reported by customers by troubleshooting and resolving hardware and software issues.
- Replaced faulty components on systems and performed preventive maintenance to secure smooth operations.
- Tested systems, noting issues and completing preventive maintenance.
- Diagnosed and repaired problems with electrical and mechanical systems.
- Worked with diverse types of weather and ground conditions.
- Tended to machines, troubleshot malfunctions and completed basic repairs to keep equipment fully functional and well-maintained.
- Inspected, evaluated and calibrated electrical and mechanical systems and components.
- Demonstrated to customers proper methods for operating equipment after it had been installed.
- Maintained strong focus on safety and efficiency to provide comprehensive support to personnel performing skilled repairs.
- Followed established procedures for inspection of belts, drives and motors, performing needed maintenance.
- Researched and implemented new technologies and equipment.
- Performed troubleshooting on HVAC systems to determine root cause of issues.
- Conducted maintenance service on HVAC systems to increase life expectancy of equipment and prevent costly repair work.
- Investigated major malfunctions and breakdowns of heating and air-conditioning systems and used troubleshooting to determine causes.
- Traveled to job sites for both scheduled and emergency appointments.
- Repaired and replaced motors, bearings and belts.
- Kept accurate records of time and materials used for each job to compile into service reports.
- Worked overtime, holidays and weekends to accommodate company needs.
- Inspected and tested refrigeration systems, safety devices and controls to determine proper functionality.
- Filled out detailed work orders for each job completed.
- Read blueprints, wiring diagrams, piping schemes and engineering specifications to diagnose and repair units.
- Repaired and replaced heating and air conditioning systems for commercial customers in residential and industrial industry.
- Closed out work orders after verifying completion with customers and reporting discrepancies discovered on job site.
- Calibrated equipment to achieve maximum efficiency.
- Maintained boilers, hot water systems, gas heating equipment and food service equipment.
- Replaced bearings, pump seals and packing.
- Supplied technical assistance to customers over phone using simple troubleshooting techniques.
- Evaluated status of refrigeration liquids for safety and compliance purposes.
- Surveyed building layout and gathered materials before beginning repairs.
- Reviewed work of external and internal contractors to guarantee consistency with quality and safety standards.
- Tested chemical levels in refrigerators and freezers to verify compliance with regulations..
- Delivered outstanding service to customers to maintain and extend relationships for future business opportunities..
- Consulted with customers to assess needs and propose optimal solutions....
- Kept site work safe and in line with budget, schedule, and applicable building codes............................................................0
- Utilized hammers, saws, squares, levels, and fastening devices to complete projects.
- Loaded, unloaded, and moved material to and from storage and production areas.
- Worked independently in fast-paced environment while meeting productivity and quality expectations.
- Worked with more knowledgeable professionals to grow understanding of principles and construction standards.
- Brought materials and tools from trucks and storage facilities to work site locations and organized for expected needs.
- Demonstrated safe and proper operation of equipment and tools to prevent harm to team members.
- Gathered and disposed of worksite debris to remove safety hazards.
- Assisted with successful, time-sensitive renovations of various structures.
- Assisted with basic carpentry work such as installing wooden floors and crown molding.
- Installed new structures, updated systems and replaced worn components to bring buildings up to current codes.
- Installed drywall, flooring and other interior finishes to create finished and functional living and work spaces.
- Followed blueprints and diagrams to complete projects according to specifications.
Education
Technical Certificate in Industrial Technology - Industrial Maintenance Technology
Ivy Tech Community College of Indiana
Evansville, IN05.2022
High School Diploma -
Liberty Christian Academy
Seymour, IN05.2011
No Degree -
Barr-Reeve High School
Montgomery, IN08.2010
Skills
- Specification Reading
- Mechanical Diagnostics
- Diagnose Problems
- System Testing
- Prepare Estimates
- Maintenance
- Work Orders and Documentation
- Recordkeeping
- Welding
- Hardworking and Dedicated
- Electrical System Maintenance
- Equipment Maintenance and Installation
- Mechanical Test Equipment
- Work Area Cleanliness
- Maintenance Recordkeeping
- Electric Motor Installation
- Schematics
- Customer Satisfaction
- Inspections
- Technical Diagnosis
- Regulatory Compliance
- Quality Assurance
- Service Records
- Defective Parts Disassembly
- Safety Policies and Procedures
- Vehicle Inspection
- Tool Organization
- Electrical Systems
- Troubleshooting and Diagnostics
- Diagnostic Procedures
- Pressure Gauges
- Parts Fabrication
- Project Deadlines
- Complete Work Orders
- Thermostat Installation
- Equipment Configuration
- Repair Defective Equipment
- Piping and Brazing
- Welding Equipment Operation
- Water Heater Maintenance
- MSDS Database Knowledge
- Blueprint Assessment
- Testing Connections
- Emergency Repair
- Refrigerant Reclaiming
- HVAC Change-Out Procedures Expertise
- Wire Diagram Interpretation
- Preventative Maintenance
- Construction Site Safety Training
- Excellent Problem-Solving Skills
- Educated on Charging Principles
- Control Systems Programming
- Troubleshooting Components
- Ductless Understanding
- Furnace Installation
- Equipment Servicing
- Blueprint Interpretation
- HVAC Installation and Maintenance
- Hazardous Materials Training
- Air Conditioning Knowledge
- Dedicated Team Player
- Insulation Installation
- Inspecting Systems
- Chilled Water Experience
- Operation and Maintenance Expertise
- Completing Charging
- Components and Capacitors
- Maintenance and Repair Records
- Equipment Replacement
- Documenting Problems
- Defrost Controls
- Leak Checks
- Investigate Malfunctions
- Soldering
- Computerized Maintenance Management Systems
- Environmental Control Systems
- Company Quality Standards
- Site Installations
- Component Replacements
- Effective Communication Skills
- Job Tracking
- Materials Usage Reporting
- Construction
- Heavy Equipment Operator
- Utility Location
- Electrical Installations
- Maintenance Documentation
- Pre-Operational Equipment Inspections
- Inclement Working Conditions
- Crane Rigging Management
- Maintain Safety
- Lockout and Tagout Procedures
- Team Leadership
- Activity Logging
- Loading and Unloading
- Team Collaboration
- Task Delegation
- Strap and Tarp Regulation
- Grease and Lubricant Application
- Operate and Repair Equipment
- Hand and Foot Coordination
- Emergency Situations
- Diagram Reading
- Verbal and Written Communication
- Safety Program Understanding
- Punctual and Dependable
- Backhoe Operation
- Job and Task Observation
- Critical Thinking
- Communicating Job Status
- Water and Sewer Piping
- Site Prep
- Carbon Monoxide Detectors
- Personnel Protection
- Safety Procedures
- Adaptable and Flexible
- Subcontractor Relations
- Weather Monitoring
- Product Knowledge
- Handheld Devices
- Distance Measurement
- Interpreting Maps and Instructions
- Safety Guidelines
- Metalworking Abilities
- Service and Repair
- Maintaining Clean Work Areas
- Duty Assignments
- Social Perceptiveness
- Cutting Torches
- Regulatory Standards
- Visual Evaluations
- Current Good Manufacturing Practices (CGMP)
- Equipment Functionality
- Wiring System Replacement
- Preventive Techniques
- Basic Tools
- Lubricate Parts
- Hazard Prevention
- Replace Components
- Product Reliability
- Safe Work Practices
- Safe Equipment Handling
- Knowledge and Skill Development
- Corrective Actions
- Copper Sweating
- Mechanical Problem Diagnosis
- Machinery Assembly
- Chemical Cleaners
- Project Drawings
- Reporting
- Waste Reduction
- Design Standards
- Test Equipment Operation
- System Layouts
- Operational Improvements
- Hydraulic Pumps
- Environmental Health and Safety
- Environmental Compliance
- Active Listening
Certification
- Industrial Maintenance Technician: Technical Certificate Ivy Tech Community College- May 2022
- MSSC Production Technician Certification - October 2020
- Osha 10 General Industry January 2021
- Osha 10 Construction Industry May 2022
- Electrical Measurement Safety Training - October 2020
- Digital Multimeter Basics Training - July 2020
Hobbies
During my free time i enjoy spending quality time with my two daughters taking them on exciting outdoor adventures. Things I like to dabble in are: fishing, camping, woodworking, painting, gardening, kayaking, swimming, and helping out my community in anyway that is within my ability. I am always learning and expanding my abilities in various types of interesting fields that I find interesting. Over the years and types of fields I have gained exceptional knowledge from many skilled individuals and carried the knowledge with me since but the one thing that I can relate to the most is that always think outside the box if faced with a task that has arose and has you stumped and you are likely to find a solution by keeping an open mind.
Timeline
Hvac Maintenance Mechanic Apprentice
French Lick West Baden Resort
08.2022 - 10.2022
Service Technician
ER Mechanical And Jewell Contracting
04.2021 - 11.2021
Power Equipment Maintenance Technician
Jasper Rubber
01.2020 - 04.2021
Service Technician
D&S Services LLC
04.2019 - 09.2021
Technical Certificate in Industrial Technology - Industrial Maintenance Technology
Ivy Tech Community College of Indiana
High School Diploma -
Liberty Christian Academy
No Degree -
Barr-Reeve High School