Leopoldo Gomez Jr

• Planned, laid out and installed electrical wiring, equipment and fixtures around local codes and job specifications.
• Followed NEC state and local building regulations.
• Tested electrical systems and continuity of circuits in electrical wiring, equipment and fixtures with ohmmeters and voltmeters.
• Performed general electrical maintenance.
• Troubleshot electrical issues using appropriate testing devices.
• Worked from ladders, scaffolds and roofs to install, maintain or repair electrical wiring, equipment and fixtures.
• Placed conduit inside designated partitions, walls or other concealed areas.
• Connected wires to circuit breakers, transformers or other components.
• Performed troubleshooting and diagnosis on malfunctioning systems or components.
• Addressed and resolved worksite safety hazards to reduce risk.
• Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
• Reviewed blueprints to determine electrical component and wiring locations.
• Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
• Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
• Pulled insulated wires or cables through conduits to complete circuits.
• Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
• Fabricated parts according to specifications using hand and power tools.
• Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
• Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
• Advised management on issues of safety in continued equipment operation.
• Diagnosed malfunctioning wiring using test equipment to locate faults.
• Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
• Dismantled electrical components using hand tools to disconnect and restore wiring connections.
• Planned layout and installation of wiring and fixtures based on project specifications and building codes.
• Installed leads and connected cables to motors, apparatus and equipment.
• Kept work areas clean, neat and free of hazards.
• Traced and diagnosed electrical malfunctions using hand tools and test equipment.
• Completed semi-skilled and skilled work under supervision of fully qualified professionals.
• Corrected issues and installed new fixtures, wiring, circuits and motors.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Troubleshot issues and developed effective solutions.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Constructed and installed electrical wiring and electronic components and maintained equipment.
• Followed established safety practices when using tools and equipment.
• Reviewed diagrams and relevant codes to complete tasks safely and accurately.
• Installed conduit systems, various lighting systems, and basic control systems.
• Assisted with new installation and upgrades of plant equipment.

• Kept work areas clean, neat and free of hazards.
• Traced and diagnosed electrical malfunctions using hand tools and test equipment.
• Performed rough-in, termination and underground work.
• Corrected issues and installed new fixtures, wiring, circuits and motors.
• Troubleshot issues and developed effective solutions.
• Completed semi-skilled and skilled work under supervision of fully qualified supervisors.
• Installed and maintained breaker panels for commercial and residential buildings.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Constructed and installed electrical wiring and electronic components and maintained equipment.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Followed established safety practices when using tools and equipment.
• Reviewed diagrams and relevant codes to complete tasks safely and accurately.
• Replaced malfunctioning components for failing electrical setups.
• Led team of apprentice electricians through installing electrical systems and inspected existing circuits.
• Reviewed existing electrical systems for maintenance, repair and update requirements.
• Built controllers and panels to complete system installations.
• Laid out and sized components according to building specifications and user requirements.
• Increased project completion time, employing best practices when installing and maintaining cableways, conduits and control systems.
• Elevated troubleshooting resolutions, verifying problems to aid with task completion and control installation quality.
• Examined and created solutions for high voltage electrical system problems.
• Reduced project lags, training revolving apprentice electricians on hands-on protocol, best practices and blueprint reading.
• Enhanced customer satisfaction ratings, troubleshooting after-hour breakdowns for immediate repair.
• Supported clients by interpreting drawings, wiring diagrams, flowcharts and project requirement descriptions to confirm correct electrical component hook-up for optimal results.

• Kept work areas clean, neat and free of hazards.
• Traced and diagnosed electrical malfunctions using hand tools and test equipment.
• Corrected issues and installed new fixtures, wiring, circuits and motors.
• Troubleshot issues and developed effective solutions.
• Completed semi-skilled and skilled work under supervision of fully qualified supervisors.
• Installed and maintained breaker panels for commercial and residential buildings.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Constructed and installed electrical wiring and electronic components and maintained equipment.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Followed established safety practices when using tools and equipment.
• Reviewed diagrams and relevant codes to complete tasks safely and accurately.
• Led team of apprentice electricians through installing electrical systems and inspected existing circuits.
• Reviewed existing electrical systems for maintenance, repair and update requirements.

• Kept work areas clean, neat and free of hazards.
• Traced and diagnosed electrical malfunctions using hand tools and test equipment.
• Corrected issues and installed new fixtures, wiring, circuits and motors.
• Troubleshot issues and developed effective solutions.
• Completed semi-skilled and skilled work under supervision of fully qualified supervisors.
• Installed and maintained breaker panels for commercial and residential buildings.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Constructed and installed electrical wiring and electronic components and maintained equipment.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Followed established safety practices when using tools and equipment.
• Replaced malfunctioning components for failing electrical setups.
• Reviewed diagrams and relevant codes to complete tasks safely and accurately.
• Led team of apprentice electricians through installing electrical systems and inspected existing circuits.
• Reviewed existing electrical systems for maintenance, repair and update requirements.
• Built controllers and panels to complete system installations.
• Laid out and sized components according to building specifications and user requirements.
• Increased project completion time, employing best practices when installing and maintaining cableways, conduits and control systems.
• Examined and created solutions for high voltage electrical system problems.
• Reduced project lags, training revolving apprentice electricians on hands-on protocol, best practices and blueprint reading.
• Worked with building management to optimize system performance.
• Raised quality control protocol, inspecting material for compliance.

• Planned, laid out and installed electrical wiring, equipment, and fixtures around local codes and job specifications.
• Followed NEC state and local building regulations.
• Performed general electrical maintenance.
• Troubleshot electrical issues using appropriate testing devices.
• Coded all projects, using drawings and manuals.
• Examined and created solutions for high voltage electrical system problems.
• Utilized wide breadth of testing equipment to assess electrical systems, circuit continuity and accessory fixtures.
• Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
• Used test equipment and hand tools to locate root causes of electrical issues and establish repair plans.
• Worked extensively on three-phase, 277/480 volt power distribution systems.
• Allocated team members and materials to each project, promoting on-time completion.
• Addressed and resolved worksite safety hazards to reduce risk.

• Examined and created solutions for high voltage electrical system problems.
• Kept work areas clean, neat and free of hazards.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Led team of apprentice electricians through installing electrical systems and inspected existing circuits.
• Traced and diagnosed electrical malfunctions using hand tools and test equipment.
• Built controllers and panels to complete system installations.
• Dug trenches and created holes to pull conduit and install supports.
• Followed NEC state and local building regulations.
• Performed general electrical maintenance.
• Prepared sketches and blueprints to determine the location of wiring and equipment.
• Planned, laid out and installed electrical wiring, equipment, and fixtures around local codes and job specifications.
• Worked extensively on three-phase, 277/480 volt power distribution systems.
• Addressed and resolved worksite safety hazards to reduce risk.
• Followed established safety practices when using tools and equipment.

• Drafted wiring layouts and developed plans for installation, selecting equipment and fixtures according to code and project specifications.
• Evaluated electrical systems, equipment and components to identify and resolve defects and safety risks.
• Installed conduit, wire and motor controls.
• Tested entire electrical assembly for performance levels and safety concerns.
• Connected wires to circuit breakers and transformers.
• Placed and installed safety systems, including emergency lighting, uninterruptible power systems and battery systems.
• Oversaw project details and adherence to regulations, including diagnosis, wiring and OSHA compliance.
• Examined and created solutions for high voltage electrical system problems.
• Directed electricians on installation, maintenance and repair on electrical wiring and equipment.
• Planned and installed complicated circuit systems in both commercial and residential construction.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Led team of apprentice electricians through installing electrical systems and inspected existing circuits.
• Replaced malfunctioning components for failing electrical setups.
• Built controllers and panels to complete system installations.

• Kept work areas clean, neat and free of hazards.
• Corrected issues and installed new fixtures, wiring, circuits and motors.
• Troubleshot issues and developed effective solutions.
• Completed semi-skilled and skilled work under supervision of fully qualified professionals.
• Installed and maintained breaker panels for commercial and residential buildings.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Constructed and installed electrical wiring and electronic components and maintained equipment.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Followed established safety practices when using tools and equipment.
• Reviewed diagrams and relevant codes to complete tasks safely and accurately.
• Replaced malfunctioning components for failing electrical setups.
• Led team of apprentice electricians in installing electrical systems and inspecting existing circuits.
• Reviewed existing electrical systems for maintenance, repair and update requirements.
• Built controllers and panels to complete system installations.
• Installed motor feeders and made standard motor connections.
• Assisted with new installation and upgrades of plant equipment.
• Installed conduit systems, various lighting systems, and basic control systems.
• Elevated troubleshooting resolutions, verifying problems to aid with task completion and control installation quality.

• Kept work areas clean, neat and free of hazards.
• Traced and diagnosed electrical malfunctions using hand tools and test equipment.
• Performed rough-in, termination and underground work.
• Corrected issues and installed new fixtures, wiring, circuits and motors.
• Dug trenches and created holes to pull conduit and install supports.
• Troubleshot issues and developed effective solutions.
• Completed semi-skilled and skilled work under supervision of fully qualified professionals.
• Installed and maintained breaker panels for commercial and residential buildings.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Constructed and installed electrical wiring and electronic components and maintained equipment.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Followed established safety practices when using tools and equipment.
• Reviewed diagrams and relevant codes to complete tasks safely and accurately.
• Replaced malfunctioning components for failing electrical setups.
• Reviewed existing electrical systems for maintenance, repair and update requirements.
• Built controllers and panels to complete system installations.
• Assisted with new installation and upgrades of plant equipment.
• Installed conduit systems, various lighting systems, and basic control systems.
• Elevated troubleshooting resolutions, verifying problems to aid with task completion and control installation quality.

• Executed timely preventive maintenance, inspection and repairs on heat traces, MI splicers, 5KV TECK cables and HV trailing cables.
• Elevated troubleshooting resolutions, verifying problems to aid with task completion and control installation quality.
• Installed conduit systems, various lighting systems, and basic control systems.
• Assisted with new installation and upgrades of plant equipment.
• Installed motor feeders and made standard motor connections.
• Built controllers and panels to complete system installations.
• Reviewed existing electrical systems for maintenance, repair and update requirements.
• Led team of apprentice electricians in installing electrical systems and inspecting existing circuits.
• Replaced malfunctioning components for failing electrical setups.
• Reviewed diagrams and relevant codes to complete tasks safely and accurately.
• Followed established safety practices when using tools and equipment.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Constructed and installed electrical wiring and electronic components and maintained equipment.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Installed and maintained breaker panels for commercial and residential buildings.
• Completed semi-skilled and skilled work under supervision of fully qualified professionals.
• Troubleshot issues and developed effective solutions.
• Dug trenches and created holes to pull conduit and install supports.
• Performed rough-in, termination and underground work.
• Assisted coworkers with special projects to learn new tasks while gaining additional responsibilities.
• Maintained electrical prints and documentation.
• Inspected electrical components and cabling.
• Provided suggestions on project improvements and system upgrades.
• Wired residential and commercial locations for electrical systems and tested to ensure proper functionality.
• Handled repair work for overhead and underground electrical power lines.
• Worked with team to install cables, poles and transformers.
• Maintained electric work tools and equipment.
• Attained skill in installation of fire alarm and control systems for commercial and residential facilities.
• Installed, tested and serviced alarm systems to determine correction functionality.
• Restored malfunctioning devices to original functionality and replaced as necessary.
• Determined appropriate tools and equipment needed to perform repairs on commercial and residential systems.
• Inspected fire and security alarm systems for both commercial and residential customers.
• Understood and followed oral and written directions.
• Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
• Demonstrated leadership by making improvements to work processes and helping to train others.
• Prioritized and organized tasks to efficiently accomplish service goals.
• Identified needs of customers promptly and efficiently.
• Planned and completed group projects, working smoothly with others.
• Maintained updated knowledge through continuing education and advanced training.

• Fire alarm, Running conduit, connecting devices such as modules, speakers, lights, smoke detectors, and terminating in panels.