Lisa Marie McCurry
Myrtle Beach,SC
Summary
Striving to acquire a coating inspector position in the inspection / oil & gas industry. My versatile background in coating & utility makes me a strong observant inspector, and a very valuable asset for any client. I am confident, competent and can complete any task given.
Overview
18
18
years of professional experience
Work History
Coating Inspector
Gulf Interstate Field Services
Buras, LA
06.2022 - 09.2023
- Gator Express Pipeline.
- Consisted of 42' Dual lay 11.7 miles & 14.7 miles
- Worked on platforms in the Barateria Bay
- Overseen coating activities that took place on the aerial bride. Using Carboline products
- Verified coating activities that took place inside the VG facility.
- Overseen coating activities for the HDD that was pushed off the lay barge.
- Inspected coatings on pipe and structural steel, verifying compliance with industry standards.
- Ensured that all safety regulations were met when working in hazardous environments.
- Performed visual inspections of coated surfaces for holidays, pinholes and other imperfections.
- Prepared detailed reports summarizing inspection results and recommended corrective action as needed.
- Monitored surface preparation for proper cleaning prior to applying coatings.
- Utilized a variety of specialized tools such as wet and dry film thickness gauges, dewpoint meters, Elcometers during inspections.
COATING INSPECTOR
Meridian Consulting Construction
Myrtle Beach, SC
10.2021 - 02.2022
- Dominion Energy Project
- Consisted of 5 miles 8"
- Ensured surface profile and cleanliness for surface preparation before coating
- Monitor environmental conditions ( air, temperatures, dew point, relative humidity, etc.)
- Insured the equipment was calibrated
- Insured dry film thickness and hardness by using relevant inspection tools
- Witness final jeep prior to lower in
- Overseen all coating activities on every HDD (8) & Bore (2) and monitored jeeping for pull back
- Observed digging, lowing in, and backfill for main tie in crew
- Collected all coating data for a T&M tie in project.
COATING /HDD INSPECTOR
Gulf Interstate Field Service
Orange, TX
03.2020 - 10.2020
- Southern Star Pipeline for Jefferson Energy
- Job consisted of 13.86 miles of 24” & 5.78 miles of 10”along the Neches
- Overseen all activities for the concrete coating of 10” & 24” pipe for HDD's in wetlands
- Overseen stringing and stock piling of all pipe for job 60% pushes & HDD
- Monitoring every HDD pull back ensuring coating was good when crews performed final jeep
- Overseen all pipe bending
- Inspected coating during tie-ins and HDD Daily reports on all welds coated. Monitor Environmental conditions (air, temperatures, dew point, relative humidity, etc)
- Insured dry flim thickness and hardness by using relevant inspection tools
- Observed jeeping activities on sections before they were lowered into the ground
- Documented all repairs made.
COATING INSPECTOR
System One Services
Huntington, WV
03.2018 - 03.2019
- 36” mainline on the MXP project in WV
- Observed coating activity's on tie in crew
- Ensured all procedures were followed
- Monitor Enviormental conditions ( air,temperatures, dew point, relative humidity,etc)
- Inspected surface preparation before coating was applied, after sand blasting was finished
- Inspected mills, hardness, and over all appearance
- Documented daily reports on all Welds Coated
- Observed jeeping activities on sections before they were lowered into the ground
- Documented all repairs made
LEAD COATING INSPECTOR
Superior Land Designs
Alpharetta, GA.
04.2016 - 03.2018
- 40” Gasoline line 1 36” Diesel line 2
- Colonial Pipeline maintenance project for pig digs and re coats
- Observed Environmental conditions, surface preparation (preheating, cleanliness, and profiles)
- Observed contractor use a two-part system called (SPC 2888) with a spray rig and, brush applied hand kits
- Monitored all jeeping to ensure satisfactory coating
- Spring (3000V) ACC was used
- Inspected all coating on 3 recoat projects
- Ensured all specifications were followed and reported back to Colonial Rep daily
- Responsible for keeping track of all inventory on rock shield, wax, coating kits, and hand kits
- Collected monthly ASH coating samples, excavations and backfill inspector
- Observed procedures being followed to code with OSHA and company standards
COATING INSPECTOR
Mbf Inspection Services
Morristown, OH
07.2015 - 11.2015
- 30" WV/Ohio - Sheehan Pipeline
- Observed environmental conditions ( air, temperatures, dew point, relative humidity, etc.)
- Observed surface preparation and cleanliness, and anchor profile
- Ensured dry film thickness and hardness by using relevant Inspection tools
- Witness all final jeeping prior to lowering in
- Observed excavations, tie ins, lower in , and back filling on tie in crew
- Ensured all equipment and personal stayed on ROW and always made safety a priority
- Ensured all state, FERC, and OSHA requirements were followed.
BENDING MACHINE OPERATOR
Snelson Co. Inc
Monterey, CA
08.2014 - 04.2015
- Straw on Tie In's & Drilling Crew 8” Monterey Ca -PG&E project
- Assisted foreman in making sure all daily activities were done in a safe and professional manner
- Kept up with daily JSA and bell hole reports
- Blasted and coated welds
- Assisted in distribution gas line work
- Helped install poly and steel pipe
- Applied epoxy coating and wrapped underground valves at test and meter stations
- Assisted with shoring all ditch as it was excavated.
Utility/Coating Inspector
Tulsa Inspection Resources
Tulsa, OK.
05.2014 - 08.2014
- Inspector over bending, Stringing, pad and backfill
- Made sure procures were followed per specifications
- Kept daily logbook and reported progress
- Ensured all equipment and personnel stayed on Right-of-way.
BENDING OPERATOR
Michels Pipeline
Harrisburg, PA
05.2013 - 10.2013
- Bent all pipe per engineer request
- Set up pipe as we bent
- Fell back to work on Tie in crew once bent out
- Followed FERC guidelines for creek crossing
- Coated welds for tie in crew- SPC 2888 brush applied
LABORER
Rockford Corporation
Montrose, PA
10.2012 - 02.2013
- Coated welds for tie in crew- 2888 hand applied coating
- Performed daily Laborer duties,
- Set up pumps, measured ditch while digging
- Jeep pipe and made repairs with 2888 two part kit
- Daily bell hole and competent report
OFFICE ASSITANT
Duphil Inc
Orange, TX.
07.2012 - 10.2012
- Offered diverse clerical support to office team members, managed correspondence, answered telephone calls and tracked documentation.
- Handled new hire paperwork and sent off drug screens,
- Did weekly timesheets for payroll
- Keep up with foreman daily progress sheets and managed spreadsheet tracking progress.
BENDING MACHINE OPERATOR
Precision Pipeline LLC
Wyalusing, PA
05.2011 - 06.2012
- Bent pipe for a 36" line through the hills of Pa
- Set up pipe as we bent
- Followed safety requirements
- Fell back to tie ins once bending was completed
- Relaid dirt
- Coated welds on the tie in crew with Denso Coating
Laborer
Sheehan Pipeline
Okeechobee, FL
03.2010 - 03.2011
- Kept up with foreman daily reports, and progress sheets
- Reported equipment maintenance sheets to mechanic
- Assisted in new hire paperwork
- Weekly payroll, Worked on clean up crew
- Daily task included:
- Maintained and repaired ROW
- Picked up trash and skids along ROW as crews moved out of area
- Spotter for equipment digging or going under powerlines
- Installed permanent water breakers
- Clean swamp areas and maintain banks
- Put down seed and mulch
- Installed line markers
WELDER HELPER
Sheehan Pipeline
Waynesboro, GA
07.2009 - 01.2010
- Fetched materials, equipment and tools for welding professionals
- Worked shacks 1-3 grind and buffing welds on automatic weld job
- Clean shack between each weld
- Assisted welder
WELDER HELPER
Henkels & Mccoy
Grafton, ND
07.2008 - 01.2009
- Front tech helper on a CRC-Evans 42" project For Internal Welding machine
- Performed the following duties daily :
- Removed trash and excess materials to clean up work areas
- Arrive to ROW an hour early daily with Welder to prepare shacks and
- Internal welding machine prior to crew arriving
- Changed wire on internal welding machine, 3 times a day
- Assisted welder as tech helper when problems arise through out the day
- Spelled off other helpers to give needed breaks
- Followed safety and FERC regulations
- Extensive training to be part of the safety team for a welder who had to perform internal welding
- Welder helper on ties for road bore and drills
WELDER HELPER
Latex Construction
Orange, TX
02.2008 - 07.2008
- Worked off a barge 7am-7pm, 7 days a week
- 42" pipe project
- Project was set up like a assembly line
- Pipe was pushed off the back of the barge as completed
- My duties included
- Removed trash and excess materials to clean up work areas
- Setting up area each day before work started
- Opening new boxes of welding rods
- Grinding and buff each weld
- Spell off other helpers to provide breaks
- Cleaned up station and taped up remaining welding rods daily to prevent moisture from ruining them over night
- Boat ride in and out daily
- Worked with and around X-Ray after each weld was completed
- Followed all safety rules that applied
WELDER HELPER
Latex Construction
Hiwassee, KA
05.2007 - 01.2008
- Fetched materials, equipment and tools for welding professionals
- Removed trash and excess materials to clean up work areas
- Grinding and Buffing welds
- Assisted welder daily
WELDER HELPER
Latex Construction
Lincoln, NE
06.2005 - 11.2005
- Removed trash and excess materials to clean up work areas
- Fetched materials, equipment and tools for welding professionals
- Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts
- Set up and operated shielded metal arc and gas metal arc welding equipment
- Grinding and buffing Welds
Education
API 1169 -
API
05.2016
NACE -
AMPP NACE Certified CIP 2
11.2014
Skills
- AMPP NACE Certified CIP level 2
- API 1169
- OSHA 30
- Hazwoper 24
- NCCER PMT , AOC
- TWIC
Timeline
Coating Inspector
Gulf Interstate Field Services
06.2022 - 09.2023
COATING INSPECTOR
Meridian Consulting Construction
10.2021 - 02.2022
COATING /HDD INSPECTOR
Gulf Interstate Field Service
03.2020 - 10.2020
COATING INSPECTOR
System One Services
03.2018 - 03.2019
LEAD COATING INSPECTOR
Superior Land Designs
04.2016 - 03.2018
COATING INSPECTOR
Mbf Inspection Services
07.2015 - 11.2015
BENDING MACHINE OPERATOR
Snelson Co. Inc
08.2014 - 04.2015
Utility/Coating Inspector
Tulsa Inspection Resources
05.2014 - 08.2014
BENDING OPERATOR
Michels Pipeline
05.2013 - 10.2013
LABORER
Rockford Corporation
10.2012 - 02.2013
OFFICE ASSITANT
Duphil Inc
07.2012 - 10.2012
BENDING MACHINE OPERATOR
Precision Pipeline LLC
05.2011 - 06.2012
Laborer
Sheehan Pipeline
03.2010 - 03.2011
WELDER HELPER
Sheehan Pipeline
07.2009 - 01.2010
WELDER HELPER
Henkels & Mccoy
07.2008 - 01.2009
WELDER HELPER
Latex Construction
02.2008 - 07.2008
WELDER HELPER
Latex Construction
05.2007 - 01.2008
WELDER HELPER
Latex Construction
06.2005 - 11.2005
API 1169 -
API
NACE -
AMPP NACE Certified CIP 2
Similar Profiles
Greg SmithGreg Smith
CWI/CIP-1 at Gulf Interstate Field ServicesCWI/CIP-1 at Gulf Interstate Field Services
Larry PardonLarry Pardon
Mechanical and Fabrication Inspector at Energy Inspection ServicesMechanical and Fabrication Inspector at Energy Inspection Services
Shawn SullivanShawn Sullivan
Safety Advisor at LineTec ServicesSafety Advisor at LineTec Services