Logan Helms
Delphos
Summary
Dynamic and skilled professional with extensive experience at Global Precision Parts, excelling in CNC operations and forklift operation. Proven ability to enhance production efficiency while maintaining high-quality standards. Adept at troubleshooting and collaborating with teams, ensuring optimal performance and safety in all tasks. Strong commitment to excellence and continuous improvement.
Overview
10
10
years of professional experience
Work History
Plumbing Apprentice
Helms Plumbing & Heating
Harrod
11.2020 - Current
- Cut openings in walls for installation of new fixtures or pipes.
- Adhered to safety protocols when working around hazardous chemicals or materials.
- Maintained cleanliness at work sites throughout the day.
- Connected water supply lines to appliances such as dishwashers and washing machines.
- Provided assistance in troubleshooting problems with existing systems.
- Traced source of leaks in residential and commercial buildings.
- Responded promptly to customer inquiries regarding service calls.
- Installed gas piping for stoves, furnaces, water heaters and other appliances.
- Repaired broken or defective parts in water supply lines and drainage systems.
- Replaced faulty valves, faucets, washers, gaskets and seals.
- Installed and repaired plumbing fixtures, such as sinks, toilets, showers, and bathtubs.
- Collaborated with contractors on various projects.
- Assisted with installation of systems, components and construction materials into new and remodeled buildings.
- Shadowed craft experts and supervisors to learn wide range of simple and complex techniques.
HVAC Installer
Helms Plumbing & Heating
Harrod
11.2020 - Current
- Installed condensate lines, gas piping, venting systems for water heating appliances, exhaust fans.
- Cleaned up job site upon completion of work to ensure a safe environment for customers.
- Troubleshot HVAC system issues using appropriate tools and test equipment.
- Calculated load requirements to determine correct size of equipment needed for each application.
- Performed installation of residential and commercial HVAC systems, including air conditioning units, furnaces, heat pumps, air handlers, and ductwork.
- Conducted maintenance on existing HVAC systems to ensure proper operation and energy efficiency.
- Inspected job sites prior to beginning work to identify any potential safety hazards or obstacles that could affect the job.
- Pulled electrical wiring for new installations or repairs to existing HVAC systems.
- Assisted in the fabrication of sheet metal ducts for ventilation systems.
- Repaired or replaced defective parts as necessary during service calls.
- Conducted brazing, threading pipe and tasks to complete service calls.
CNC Machinist
Global Precision Parts
Ottoville
01.2021 - 08.2024
- Test completed workpieces for quality control purposes prior to shipment.
- Use computer software for programming CNC Machines.
- Make adjustments to the machine feed rate, speed and depth of cut for each project.
- Adjust offsets during program execution; monitor results against programmed values.
- Calculate dimensions and tolerance using knowledge of mathematics and instruments such as micrometers or calipers.
- Conduct regular preventive maintenance activities on assigned machines; document results accordingly.
- Utilize manual machining techniques when required; complete projects within allotted time frames.
- Supervise junior staff members; provide guidance on proper use of machines.
- Replace cutting tools according to job requirements; inspect tool condition regularly for wear and damage.
- Set up and operate CNC machines to perform tasks such as drilling, milling, and turning.
- Read and interpret blueprints, sketches, drawings, manuals, specifications or sample parts to determine dimensions and tolerances of finished workpieces.
Plant Assembler
Machine Pro Technologies
Celina
09.2019 - 03.2020
- Utilized hand tools, power tools, and other specialized equipment during assembly tasks.
- Monitored inventory levels of supplies necessary for assembly process.
- Maintained cleanliness of work area at all times in accordance with safety regulations.
- Followed detailed instructions provided by engineers regarding assembly processes.
- Inspected assembled components for accuracy and precision according to established standards.
- Operated forklifts to transport materials throughout the plant floor.
- Maintained a clean workspace by disposing of waste materials appropriately.
Material Handler
Global Precision Parts
Ottoville
07.2019 - 09.2019
- Monitored stock levels and placed orders when necessary to replenish supplies.
- Received and distributed incoming materials to designated areas.
- Investigated discrepancies between inventory records and actual stock on hand.
- Organized warehouse shelves, racks, and bins for proper storage of materials.
- Loaded and unloaded trucks with appropriate material handling equipment.
- Operated forklifts, pallet jacks, and other material handling equipment.
- Adhered strictly to company policies concerning the use of protective gear while on duty.
- Inspected materials for any damages or defects upon receipt.
Parts Washer
Global Precision Parts
Ottoville
05.2018 - 07.2019
- Assisted with inventory management by monitoring stock levels of supplies used during washing process.
- Ensured that all areas around the machines were kept clean and free from debris or hazardous materials.
- Performed daily inspections on parts washer equipment and reported any malfunctions or safety hazards.
- Provided technical support when troubleshooting issues with the machines and their controls.
- Inspected finished products for defects prior to packing them for shipment.
- Maintained proper levels of cleaning solution in parts washer tanks.
- Reported any discrepancies in product quantity or quality immediately upon discovery.
- Followed all safety procedures while using the parts washers and other tools.
- Trained new staff members on proper usage of equipment and safety protocols associated with its operation.
- Conducted regular audits of work area to identify potential safety risks or operational problems.
CNC Operator
Global Precision Parts
Ottoville
02.2016 - 05.2018
- Troubleshoot machine malfunctions to identify root cause of problems.
- Load raw materials into machines, change cutting tools when required, and secure material onto fixtures or work tables.
- Train new operators on the safe use of CNC machines.
- Provide input on ways to improve processes related to CNC operations.
- Collaborate with other personnel including engineers, supervisors and technicians.
- Follow safety regulations at all times while operating CNC machinery.
- Inspect finished workpieces for accuracy according to specifications and make adjustments if needed.
Screw Machine Operator
Global Precision Parts
Ottoville
08.2015 - 02.2016
- Recorded daily production data in logbook for tracking purposes.
- Performed routine maintenance on machines to ensure optimal performance.
- Notified appropriate personnel regarding any malfunctions or breakdowns that occurred during operations.
- Adjusted machine settings to ensure product conformed to customer specifications.
- Performed minor repairs on machines as needed.
- Verified accuracy of set-up parameters prior to starting the cycle.
- Loaded materials into machines according to job specifications.
- Inspected, measured and tested machined parts using gauges, micrometers, calipers and other measuring instruments.
- Produced high quality parts efficiently within established time frames.
- Changed worn cutting tools with new ones as needed.
- Utilized blueprints or drawings to determine dimensions for finished products.
- Monitored coolant levels and changed coolant when necessary.
Education
High School Diploma -
Delphos Saint John
Delphos, OH05-2009
Skills
- Forklift operation
- Overhead crane operation
- Acme Gridley operator
- Eurotech Trofeo setup
Affiliations
- automotive maintenance, and modification.
- Farming
- Building Computers
Timeline
CNC Machinist
Global Precision Parts
01.2021 - 08.2024
Plumbing Apprentice
Helms Plumbing & Heating
11.2020 - Current
HVAC Installer
Helms Plumbing & Heating
11.2020 - Current
Plant Assembler
Machine Pro Technologies
09.2019 - 03.2020
Material Handler
Global Precision Parts
07.2019 - 09.2019
Parts Washer
Global Precision Parts
05.2018 - 07.2019
CNC Operator
Global Precision Parts
02.2016 - 05.2018
Screw Machine Operator
Global Precision Parts
08.2015 - 02.2016
High School Diploma -
Delphos Saint John
Similar Profiles
Edwina TinitaliEdwina Tinitali
Office Coordinator at Fox Plumbing & Heating/Mercurio's Heating & ACOffice Coordinator at Fox Plumbing & Heating/Mercurio's Heating & AC
Semi MatavuraSemi Matavura
Plumber at Top Shelf Plumbing Pty LTD, Four seasons Heating & Cooling, AutoCad Plumbing Pty LTD, EtcPlumber at Top Shelf Plumbing Pty LTD, Four seasons Heating & Cooling, AutoCad Plumbing Pty LTD, Etc
Brody HayesBrody Hayes
Licensed Journeyman Plumber at Elevated Plumbing & Heating/Jim Houg PlumbingLicensed Journeyman Plumber at Elevated Plumbing & Heating/Jim Houg Plumbing