Luis Del Villar
Summary
Experienced Quality Control Auditor with 5 years of experience working as a QA auditor for Seah Steel USA, and about 11 years working in this industry. As mentioned in my work history, i started back in 2012 as a full length drifter at OFSI which back then was ITS. I quickly learned how to use all gauges and procedures as a QC Inspector, and kept doing that until 2017 at Pinnacle, OMK Tube, and Seah. In 2018 I got the chance to jump on board as a QA Auditor here at SEAH and have been in the same position since. I am now a lead auditor at the thread lines above two other auditors. I know I am ready for new challenges and greater opportunities that GBCD can offer me as a company. I was actually working at OMK Tube when GBCD was getting in the market in the surrounding companies. I recognize and acknowledge the high standards that GBCD carries. I know I can be a great fit for the GBCD team giving my experience with the actual Btc GBCD threads. With that being said, I like were I am now but I know I can do better, and in this industry that better is definitely GBCD.
Overview
11
11
years of professional experience
1
1
Certification
Work History
QA/QC Auditor
SeAH Steel USA
Houston, TX
05.2017 - Current
- Report problems and concerns to management on Qa daily reports.
- Inspect thread molds at beginning of all shifts and any work order changeovers as needed.
- Thread inspect a couple pipes on one Qa check to gather thread dimensions for a daily report that consist of three QA checks if one order is to be ran all day.
- Perform walk thru in processing line to assure all procedures ( as per thread procedures in process) and specifications are being met to customers standards.
- Monitoring inspectors as they perform gauge thread inspections, and making sure they are following all thread inspection procedures depending which thread is being processed.
- Check and set all gauges in use on each of its proper standards to assure all gauges are set to nominal or zero on all inspection and buck on areas.
- Visual and gauge inspection on 1% of each coupling pallet that is being used for material in process.
- Making sure all stencils are being formatted as should be with all proper information, and that stencils are being applied as per customers request.
- Filling out any NCR's for any reject or material in question (Qc hold) and either making material prime or rejecting bad material.
- Creating weekly cycle counts reports of prime pipe racks in the yard for a weekly thread inspection of inventory material.
- Weekly gauge inspect 8 joints from a prime pipe rack that was done in cycle counts to assure thread dimensions are within thread tolerance and all stenciled information matches work order.
QC Inspector
OMK Tube
Houston, TX
09.2015 - 04.2017
- Verify work order that was being processed for that shift.
- Make thread molds at the beginning of every shift to start processing.
- Verify all gauge tooling was in good condition, up to date, and set correctly to nominal on each of its proper standards for accurate thread dimensions.
- Recorded thread dimensions on daily inspection sheets.
- Follow all inspection procedures depending what thread or material was being processed.
- Examined thread material for imperfections and defects, and rejected any bad material.
- When there was any work order changeovers all new gauges were set to new material measurements.
- Work along with machine operators to set new material up or to avoid any reject material while in process.
Qc Thread Inspector
Pinnacle Machine Works
Houston, TX
10.2014 - 09.2015
- Verify work order that was being processed for that shift.
- Make thread molds at the beginning of every shift to start processing.
- Verify all gauge tooling was in good condition, up to date, and set correctly to nominal on each of its proper standards for accurate thread dimensions.
- Recorded thread dimensions on daily inspection sheets.
- Follow all inspection procedures depending what thread or material was being processed.
- Examined thread material for imperfections and defects, and rejected any bad material.
- Work along with machine operators to set new material up or to avoid any reject material while in process.
Qc Thread Inspector
OFSI
Houston, TX
08.2012 - 09.2014
- I started as a full length drifter, which consisted of drifting all pipe that was going in to the thread lines.
- Quickly picked up the use of gauges and importance of gauge and visual inspection.
- Once a thread inspector i would verify work orders being processed for that shift.
- make thread molds for the beginning of every shift and all work order changeovers.
- Monitored product quality with gauge and visual inspection.
- Recorded all thread dimensions and daily inspection reports.
- Examined thread material for imperfections and defects, and rejected any bad material.
Education
High School Diploma -
E. L. Furr High School
Houston, TX06.2012
Skills
- Audit Reporting
- Issue Resolution
- Sampling Techniques (thread molds)
- Report Writing
- Leadman Experience
- Quick Learner
- Teachable
Certification
API Accredited Thread Inspector- Tubing & Casing Course
Languages
Spanish
Native or Bilingual
Timeline
QA/QC Auditor
SeAH Steel USA
05.2017 - Current
QC Inspector
OMK Tube
09.2015 - 04.2017
Qc Thread Inspector
Pinnacle Machine Works
10.2014 - 09.2015
Qc Thread Inspector
OFSI
08.2012 - 09.2014
High School Diploma -
E. L. Furr High School