Luis Enrique Regalado Avila

• Installed and maintained electrical systems in compliance with safety regulations.
• Troubleshot and repaired electrical malfunctions using advanced diagnostic tools.
• Developed and implemented efficient wiring processes to enhance project timelines.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
• Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
• Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
• Stored and maintained power tools and equipment for each job.
• Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
• Mentored apprentice electricians in proper installation techniques, safety protocols, and troubleshooting methods to enhance their skill sets.
• Inspected worksites and installations to verify compliance with state safety codes.
• Collaborated with construction teams to ensure seamless integration of electrical systems within new builds.
• Spliced, joined and connected wire to fixtures and other electrical components.
• Followed state and local building regulations based on National Electrical Code.
• Studied building schematics to determine location of wiring and equipment.

• Improved electrical system safety by conducting thorough inspections and identifying potential hazards.
• Worked from ladders, scaffolds and lifts to install channel tray for wiring of instruments
• Inspected worksites and installations to verify compliance with state safety codes.
• Studied building schematics to determine location of wiring and equipment.

• Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
• Stored and maintained power tools and equipment for each job.
• Inspected worksites and installations to verify compliance with state safety codes.
• Fabricated custom and replacement parts according to specifications, using hand tools.

• install cable tray on pipe rack according to blue prints

• Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.

• worked on installing fire alarm devices and panels. • Ran conduit and pulled wire for fire alarm.

• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.

• Repaired and installed new fixtures, wiring, circuits and motors.
• Interpreted electrical codes and diagrams to complete electrical repair and installation tasks.
• Enhanced quality and safety of production systems, working with management teams to develop and implement corrective actions for process problems.
• Read and understood technical drawings, diagrams, flow charts and project documentation to make accurate decisions about electrical system installations and repairs for each assignment.
• Increased project success by diagnosing faults and removing defective components while repairing and restoring equipment and systems.
• Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment and handling of materials.
• Operated tools according to prescribed safety practices.
• Performed detailed inspection and repairs on splicers, cables and Type equipment.
• Completed rough-in, termination and underground work.
• Utilized customer feedback to develop plans and solve problems.
• Educated wide range of entry-level electricians on best practices and company protocol, ensuring maximum productivity.
• Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.

• Helped complete system installations, digging trenches and breaking up concrete.
• Worked under supervision of [Job title] to learn trade and develop electrical knowledge.
• Moved equipment, supplies and tools to work locations to assist [Job title] in completing skilled work.
• Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls.
• Configured controllers and set up panels for [Type] installations.
• Boosted job efficiency and customer satisfaction by maintaining organized and clean job sites.
• Inspected and tested electrical systems to identify connection issues and other faults affecting system performance.
• Educated wide range of entry-level electricians on best practices and company protocol, ensuring maximum productivity.
• Repaired and installed new fixtures, wiring, circuits and motors.
• Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
• Decreased customer wait-time by efficiently installing [Type], [Type] and [Type] systems.
• Trained junior electrical professionals on proper procedures.
• Ensured proper utilization of equipment in alignment with established safety protocols, electric code and Occupational Health and Safety regulations.
• Completed rough-in, termination and underground work.
• Operated tools according to prescribed safety practices.
• Read and understood technical drawings, diagrams, flow charts and project documentation to make accurate decisions about electrical system installations and repairs for each assignment.
• Enforced production safety and quality by supporting leadership in determining solutions for process issues and inefficiencies.
• Performed detailed inspection and repairs on splicers, cables and [Type] equipment.
• Carried out timely preventive maintenance actions, inspections and repairs on [Type], [Type] and [Type] equipment.

• Helped complete system installations, digging trenches and breaking up concrete.
• Worked under supervision of [Job title] to learn trade and develop electrical knowledge.
• Moved equipment, supplies and tools to work locations to assist [Job title] in completing skilled work.
• Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls.
• Boosted job efficiency and customer satisfaction by maintaining organized and clean job sites.
• Inspected and tested electrical systems to identify connection issues and other faults affecting system performance.
• Educated wide range of entry-level electricians on best practices and company protocol, ensuring maximum productivity.
• Repaired and installed new fixtures, wiring, circuits and motors.
• Oversaw projects with crew of [Number] personnel maintaining, repairing, testing and calibrating [Type] electrical systems, components and equipment.
• Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
• Interpreted electrical codes and diagrams to complete electrical repair and installation tasks.
• Verified problems, investigated faults and troubleshot solutions to enhance installations.
• Utilized customer feedback to develop plans and solve problems.
• Decreased customer wait-time by efficiently installing [Type], [Type] and [Type] systems.
• Increased customer satisfaction ratings by effectively repairing systems.
• Ensured proper utilization of equipment in alignment with established safety protocols, electric code and Occupational Health and Safety regulations.
• Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment and handling of materials.
• Completed rough-in, termination and underground work.
• Operated tools according to prescribed safety practices.
• Read and understood technical drawings, diagrams, flow charts and project documentation to make accurate decisions about electrical system installations and repairs for each assignment.

• Worked under supervision of [Job title] to learn trade and develop electrical knowledge.
• Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls.
• Moved equipment, supplies and tools to work locations to assist [Job title] in completing skilled work.
• Pulled wire through conduits and through holes in walls and floors.
• Assisted with electrical installations, including lighting and smoke detectors.
• Used hand and power tools and diagnostic equipment to complete various aspects of jobs.
• Installed new electrical components, fixtures and motors.
• Followed direction of senior electrical professionals to complete safe, efficient tasks.
• Gathered parts supplies and tools in preparation for each workday or new job.
• Served as electrical apprentice on high-rise commercial and residential buildings, including roughing for new construction, rehabilitation and maintenance projects.
• Boosted job efficiency and customer satisfaction by maintaining organized and clean job sites.
• Maintained cleanliness and organization of work areas.
• Installed brackets and hangers to support electrical equipment.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment, including switches, relays and circuit breaker panels.
• Accurately pulled EMT and PVC conduit wire while maintaining safety standards.
• Measured and cut required supplies such as wire and conduit.
• Spliced, joined and connected wire to fixtures and other electrical components.
• Completed and checked wiring tasks through wall and floor conduits and holes accurately.
• Followed strict schedules to install and test 120/208 and 247/600 volt systems.
• Adhered to all relevant electrical and building codes for each job.
• Spliced, joined and connected wire to accurately install new electrical systems.
• Handled installation of electrical components by splicing, joining and connecting wire.
• Placed EMT and PVC conduits and pulled wire through conduits.
• Read and interpreted drawings, circuit diagrams and electrical code specifications to determine wiring layouts for building automation systems
• Safely pulled wire through EMT and PVC conduits while ensuring accuracy and efficiency.
• Checked supportive electrical equipment such as brackets and hangers, making repairs when necessary.
• Pulled wire through EMT and PVC conduits to complete [Type] installations.
• Reviewed electrical schematics and plans and followed according to specifications.
• Checked and performed electrical wiring through conduits and holes in walls and floors.
• Adhered to work site safety protocols and reported potential hazards.
• Installed electrical components by splicing, joining and connecting wire to fixtures.
• Installed electrical wiring through conduits and holes in both flooring and walls.

• Worked under supervision of [Job title] to learn trade and develop electrical knowledge.
• Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls.
• Configured controllers and set up panels for [Type] installations.
• Moved equipment, supplies and tools to work locations to assist [Job title] in completing skilled work.
• Pulled wire through conduits and through holes in walls and floors.
• Assisted with electrical installations, including lighting and smoke detectors.
• Used hand and power tools and diagnostic equipment to complete various aspects of jobs.
• Installed new electrical components, fixtures and motors.
• Repaired existing systems and replaced malfunctioning parts.
• Followed direction of senior electrical professionals to complete safe, efficient tasks.
• Gathered parts supplies and tools in preparation for each workday or new job.
• Served as electrical apprentice on high-rise commercial and residential buildings, including roughing for new construction, rehabilitation and maintenance projects.
• Boosted job efficiency and customer satisfaction by maintaining organized and clean job sites.
• Maintained cleanliness and organization of work areas.
• Helped complete system installations, digging trenches and breaking up concrete.
• Installed brackets and hangers to support electrical equipment.
• Worked with more knowledgeable professionals to grow understanding of principles and construction standards.
• Completed installations and testing for 120/208 and 247/600 volt systems within expected timeframes.
• Performed detailed evaluations and made repairs on various electrical equipment such as light fixtures, controls, switches, relays and circuit breaker panels.
• Accurately pulled EMT and PVC conduit wire while maintaining safety standards.
• Evaluated and initiated repair work on various electrical equipment such as light fixtures, controls, switches, relays and circuit breaker panels.
• Measured and cut required supplies such as wire and conduit.
• Spliced, joined and connected wire to fixtures and other electrical components.
• Completed and checked wiring tasks through wall and floor conduits and holes accurately.
• Installed 120/208 volt systems and 347/600 volt systems.
• Worked closely with public utility companies to develop expertise in communication, systems cabling, circuitry and writing projects.
• Adhered to all relevant electrical and building codes for each job.
• Repaired light fixtures, controls, switches, relays and circuit breaker panels based on detailed evaluations.
• Collaborated in team environment to accomplish projects.
• Checked system adherence to [Type] code requirements after performing repairs and maintenance on client systems and equipment.
• Spliced, joined and connected wire to accurately install new electrical systems.
• Gained experience and recognition for ability to analyze and follow manuals, schematic diagrams, blueprints and other specifications
• Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
• Handled installation of electrical components by splicing, joining and connecting wire.
• Placed EMT and PVC conduits and pulled wire through conduits.
• Read and interpreted drawings, circuit diagrams and electrical code specifications to determine wiring layouts for building automation systems
• Installed new electrical systems based on project specifications, layouts and components.
• Safely pulled wire through EMT and PVC conduits while ensuring accuracy and efficiency.
• Installed electrical wiring through conduits and holes in both flooring and walls.
• Adhered to work site safety protocols and reported potential hazards.
• Checked and performed electrical wiring through conduits and holes in walls and floors.
• Reviewed electrical schematics and plans and followed according to specifications.
• Pulled wire through EMT and PVC conduits to complete [Type] installations.

• Read and interpreted blueprints and job plans, verified measurements and checked site conditions before installing any panels.
• Ran wires and set up support structures for panels.
• Installed panels using hand and power tools.
• Inventoried supplies and materials for installations and repairs, documented changes and requested new inventory to meet expected demand.
• Examined blueprints, technical documentation and customer facilities to determine appropriate locations for installations.
• Collaborated with new owners on basic thermal system repairs and overall operation of new systems to promote longevity and optimal service.
• Met production goals by maintaining cost effective levels of spare parts inventory.
• Unpacked and assembled all new merchandise using variety of power tools.
• Followed company procedures to maintain work environment in neat and orderly condition.
• Employed wide variety of hand and power tools including hoists, drills, precision measuring instruments and electronic testing devices.
• Used schematic diagrams to plan work.
• Used hand tools to change worn cutting tools.
• Accurately read blueprints to install [Type] and [Type] materials effectively.
• Installed, aligned, and balanced new equipment.