LYNDON HOLLY
Washington,DC
Summary
Reliable Electrician with extensive experience in Commercial Construction and some residential projects, handling mechanical needs. Knowledgeable, dedicated and offering superior skills. Proactive and goal-oriented professional with excellent time management and problem-solving skills. Known for reliability and adaptability, with swift capacity to learn and apply new skills. Committed to leveraging these qualities to drive team success and contribute to organizational growth.
Equipped with strong problem-solving abilities, willingness to learn, and excellent communication skills. Poised to contribute to team success and achieve positive results. Ready to tackle new challenges and advance organizational objectives with dedication and enthusiasm. Talent for navigating challenges. Brings strong problem-solving skills and proactive approach to new tasks. Known for adaptability, creativity, and results-oriented mindset. Committed to making meaningful contributions and advancing organizational goals.
Overview
21
21
years of professional experience
1
1
Certification
Work History
Electrician
M.C. Dean
08.2024 - 04.2025
- Installed PVC pipe Underground for medium voltage crossers, MSB feeds, and Telecom feeds.
- Installed overhead raceways, and cable trays.
- Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
- Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
- Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
- Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
- Stored and maintained power tools and equipment for each job.
- Inspected worksites and installations to verify compliance with state safety codes.
- Enhanced quality control by inspecting condition of equipment and tools.
- Performed routine and complex maintenance and repairs on various electrical equipment.
- Installed and wired electrical transformers, service panels, and circuit breakers.
- Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
- Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
- Studied building schematics to determine location of wiring and equipment.
Building Engineer II
Woodruff Arts Center
04.2023 - Current
- Responsible for assisting in hands-on-maintenance of building systems to ensure their safe, efficient, and proper operation; perform minor repairs, assist in the operation, monitoring and performance of preventive maintenance on building systems, which includes Central Plants, HVAC and Humidifiers, Electrical Systems, Building Envelope, Fire and Life Safety Systems and Equipment, Elevator Systems and Loading Dock.
- Responsible for the proper reset of breakers and report shorts, replacing outlets, switches, and lighting ballast.
- Read and interpret electrical drawings and wiring diagrams, perform weekly generator run up and document run logs.
- Responsible for minor preventive maintenance of an AHU.
- Respond to HVAC calls, determine if repair is needed in a timely manner, assist with test and minor adjustment to chemical treatment levels in water system; perform a daily inspection and log of a chiller and report anything out of range; inspecting and replacing belts on an AHU; adjust set points, temperature on building energy management system and able to read and interpret HVAC drawings.
- Identify and respond to fire alarm and trouble in a timely manner; conduct a weekly inspection and log of Emergency Generator.
- Surveyed and tracked mechanical, plumbing and electrical equipment to enhance service quality and comply with preventive maintenance plans.
- Conveyed thoughts and recommendations to supervisors, contractors and other stakeholders to resolve building-related problems.
- Organized and prioritized competing priorities to maximize personal and team productivity.
- Stooped, stood, climbed and lifted heavy equipment to perform installations.
- Performed preventive maintenance and corrective repair to maintain buildings, industrial systems, equipment and grounds.
Electrician
Warner Media
11.2021 - 04.2023
- Utilizing a general working knowledge of electrical components, systems and structures, tools, test instruments, and proper procedures, I performed visual inspections of generators, checking oil and fuel levels, checking UPS systems and logging voltage.
- I was responsible for disarming and rearming of smoke systems and vedas, and performing fire alarm tests for each building.
- I changed light bulbs and ballast.
- I worked with HVAC assisting in wiring motors and fans.
- In addition, I was responsible for responding to all emergencies.
- Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
- Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
- Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
- Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
- Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
- Inspected worksites and installations to verify compliance with state safety codes.
- Performed routine and complex maintenance and repairs on various electrical equipment.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
- Managed business report generation, recordkeeping and supply ordering.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Troubleshot and repaired malfunctioning systems and components.
- Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
- Followed state and local building regulations based on National Electrical Code.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
Electrician
Madison Industries
10.2019 - 11.2021
- I am responsible for building kiosks for airports, building gas stations and car washes.
- As lead electrician for Kiosks, I install all electrical panels, heaters, A/C units and all electrical devices.
- I test all circuits.
- I read blueprints and schematics.
- For gas stations, I run PVC, EMT and MC, pull wires including lighting circuits, and running feed for condensing units.
- Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
- Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
- Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
- Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
- Stored and maintained power tools and equipment for each job.
- Inspected worksites and installations to verify compliance with state safety codes.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
- Studied building schematics to determine location of wiring and equipment.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Installed 120/208 volt systems and 347/600 volt systems.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Troubleshot and repaired malfunctioning systems and components.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
ELECTRICAL APPRENTICE
Singleton Electric
06.2017 - 06.2018
- I was assigned to work at the Departments of Labor and Commerce.
- I performed such duties as installing fire alarm panels and devices, bending and running EMT pipe, pulling wires, installing receptacles, switches, and lights, pulling feeders, disconnecting and re-wiring air condition units and finalizing for inspections.
- I read spec’s, blueprints and layouts.
- I worked individually and as a team member with minimum supervision.
ELECTRICAL APPRENTICE
Dynletric
09.2016 - 06.2017
- I worked in a Data Center and commercial buildings.
- I performed such duties as installing electrical and fire alarm panels and devices, bending and running EMT and PVC pipe, pulling wires, installing receptacles, switches, lights and finalizing for inspections.
- Read spec’s, blueprints and layouts.
- I worked individually and as a team member with minimum supervision.
RESIDENTIAL WORKER
City General Electric
11.2015 - 09.2016
- I worked in commercial and office buildings.
- I performed such duties as pulling wire, bending and running EMT pipe, wiring lights, installing receptacles, switches, wiring devices, signing out and organizing tools and materials, setting transformers, terminating existing power and wires.
- Read spec’s, blueprints and layouts.
- As requested, worked with the fire alarm team.
- I worked with some supervision.
RESIDENTIAL WORKER
Chesapeake Electric
10.2014 - 07.2015
- I worked in commercial, schools and office buildings.
- I performed such duties as assisting journeyman setting up and preparing for different task, organizing tools and materials, checking and receiving inventory, pulling wire, bending and running EMT pipe, wiring lights, installing receptacles, switches, wiring devices, setting transformers, terminating existing power and wires.
- Read spec’s, blueprints and layouts.
PLUMBER’S HELPER
Pierce Plumbing
01.2013 - 12.2013
- I assisted the plumber in a variety of plumbing duties such as repairing or replacing toilets and sinks, snaking our drains and pipes, changing valves, replacing water lines, sodding pipes, replacing shut-off valves.
PAINTER
Architect of the Capitol
11.2012 - 12.2012
- I was responsible for painting suites and halls in the House Office Building.
- Duties included checking work orders for paint colors, edging (cutting), painting the walls (rolling), cleaning doors and light fixtures, cleaning tools and cleaning up after the job is completed.
- Particular attention must be given to detail because of the historical nature of the buildings.
- Team work was very important.
PLAN CLERK
Structure Tone Construction Inc.
04.2007 - 02.2009
- I was responsible for receiving blueprints from architects, ordering copies for distribution to subcontractors, receiving FedEx and UPS packages for distribution to the appropriate project manager, preparing labels for shipments for FedEx and UPS accounts, calling subcontractors to request submission of proposals, setting up spread sheets, copying spec’s from CD and hard copy, maintaining subcontractor list, reviewing printing invoices to verify correct billing, and answering the telephone as necessary.
- In addition, I volunteered to work overtime on weekends and evenings supervising job sites.
- I was responsible for coordinating the work being done, reading blueprints and answering questions from subcontractors or contacting superintendent or project manager for clarification, signing time cards for workers, checking inventory, coordinating delivery of materials, and ensuring that the work site was left in order.
CLERICAL ASSISTANT/AUTOMATION CLERK (INTERN)
Department of Interior, National Park Service
07.2004 - 05.2006
- I performed clerical support for one or more professional, program or technical staff members, utilizing my typing skills and knowledge of office automation hardware and software.
- Using word processing software, I produced a variety of standardized documents from handwritten drafts, edited copy of electronic files created by another staff member.
- Performed limited research and special assignments for the Director of Higher Education and the Director of National Park Service.
- Assisted in setting up conferences and in training new interns.
- On occasion, made presentations at meetings and conferences.
Education
Some College (No Degree) - Business
Livingstone College
Salisbury, NCDiploma -
American Community School of Athens
Athens, GR 06.2004
Skills
- Writing System Design
- Installations and repair
- Troubleshooting and diagnosis
- Blueprint reading
- NEC codes and codebook
- OSHA 30 compliance
- Accurate and efficient
- Service minded
- System repair
- Systems maintenance
- OSHA guidelines
- Preventive Maintenance
- Emergency planning
- Code compliance
- Equipment testing
Training
- IBEW Local 26 Joint Apprenticeship, 09/01/16, 06/01/18, True
- ClickSafety, OSHA 30 Training
- Associate Builders and Contractors, Construction 101, Blueprint Reading 101, Blueprint Reading 102
Certification
- ClickSafety Training - OSHA 30
- Associate Builders and Contractors Training - Construction 101, Blue Print Reading 101, Blue Print Reading 102
- United Academy/ United Rentals Training - Mobile Equipment
Timeline
Electrician
M.C. Dean
08.2024 - 04.2025
Building Engineer II
Woodruff Arts Center
04.2023 - Current
Electrician
Warner Media
11.2021 - 04.2023
Electrician
Madison Industries
10.2019 - 11.2021
ELECTRICAL APPRENTICE
Singleton Electric
06.2017 - 06.2018
ELECTRICAL APPRENTICE
Dynletric
09.2016 - 06.2017
RESIDENTIAL WORKER
City General Electric
11.2015 - 09.2016
RESIDENTIAL WORKER
Chesapeake Electric
10.2014 - 07.2015
PLUMBER’S HELPER
Pierce Plumbing
01.2013 - 12.2013
PAINTER
Architect of the Capitol
11.2012 - 12.2012
PLAN CLERK
Structure Tone Construction Inc.
04.2007 - 02.2009
CLERICAL ASSISTANT/AUTOMATION CLERK (INTERN)
Department of Interior, National Park Service
07.2004 - 05.2006
Some College (No Degree) - Business
Livingstone College
Diploma -
American Community School of Athens
Similar Profiles
Edwin FordEdwin Ford
Electrical Apprentice at M.C. Dean, Inc.Electrical Apprentice at M.C. Dean, Inc.
Wayne Maverick WilliamsWayne Maverick Williams
Project Leader at M.C DeanProject Leader at M.C Dean
Alexander G. NazarioAlexander G. Nazario
Journeyman Electrician at M.C. Dean Inc.Journeyman Electrician at M.C. Dean Inc.