Marcel Bucur

• Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
• Installed conduit for new wiring systems in commercial buildings.
• Tested continuity of circuits with testing devices such as ohmmeters, voltmeters and ammeters.
• Resolved safety issues related to faulty wiring installation practices in a timely manner.
• Worked on high voltage switchgear projects involving transformer hookups and terminations up to 15kv level.
• Fabricated parts according to specifications using hand and power tools.
• Led teams and delegated tasks to install, maintain, or repair electrical systems and wiring.
• Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
• Reviewed blueprints to determine electrical component and wiring locations.
• Planned layout and installation of wiring and fixtures based on project specifications and building codes.
• Trained workers to install, maintain and repair electrical equipment and fixtures.
• Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
• Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
• Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
• Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
• Installed leads and connected cables to motors, apparatus and equipment.
• Pulled insulated wires or cables through conduits to complete circuits.
• Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
• Reviewed and assessed electrical, mechanical and architectural diagrams and specifications to accurately complete projects.
• Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.
• Evaluated electrical systems, equipment, and components to identify and resolve defects and safety risks.
• Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
• Performed electrical utility services for industrial-based and new building projects.

• Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
• Tested continuity of circuits with testing devices such as ohmmeters, voltmeters and ammeters.
• Repaired or replaced worn or defective parts using hand tools and power tools.
• Connected wires to circuit breakers, transformers or other components.
• Maintained current electrician's license or identification card to meet governmental regulations.
• Installed conduit for new wiring systems in commercial buildings.
• Inspected electrical equipment and systems to identify hazards, defects and the need for adjustment or repair.
• Resolved safety issues related to faulty wiring installation practices in a timely manner.
• Identified problems with electrical systems by observing operation, listening for problems and using test equipment such as multi-meters.
• Diagnosed malfunctioning systems using schematics diagrams and test instruments such as digital multimeters.
• Installed conduit, wire and motor controls.
• Connected wires to circuit breakers and transformers.
• Traced and diagnosed electrical malfunctions using hand tools and test equipment.
• Planned and installed complicated circuit systems in both commercial and residential construction.
• Worked extensively on three-phase, 277/480 volt power distribution systems.
• Interpreted schematics, blueprints and diagrams to complete projects on time.

Examined faulty systems for problems, troubleshot solutions and reported findings to project manager quickly and accurately.

• Built controllers and panels to complete system installations.
• Dug trenches and created holes to pull conduit and install supports.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Conducted maintenance and preventative programs.
• Transported tools, materials and supplies to job locations.
• Replaced malfunctioning components for failing electrical setups.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Inspected existing wiring to identify problems such as short circuits.
• Gathered required tools and equipment for each task to increase efficiency.
• Measured and prepared supplies for electrical tasks.
• Maintained high levels of accuracy and customer satisfaction by thoroughly checking completed work.
• Reviewed blueprints and electrical schematics to perform tasks to specifications.
• Adhered to company standards and OSHA regulations for work site safety.
• Trained 3-4 coworkers at the time on safety tool use, resulting in safer and more timely maner finishing of a project.
• Used metters to safely determine and measure, cut and bend high amperage wire.
• Safely installed over 500-1000 ft of Emt components over 8 hours.
• Implemented new way for installing light fixtures, decreasing project time.
• Kept work areas clean, neat and free of hazards.
• Maintained organization, cleanliness and safety in all work areas.
• Completed semi-skilled and skilled work under supervision of fully qualified supervisors.
• Demonstrated strong foundation of safety knowledge and implemented industry best practices.
• Assisted with electrical installation tasks, including A.T.S and diesel power generator in a helth care providing facility

• Directed electricians on installation, maintenance and repair on electrical wiring and equipment.
• Installed complicated circuit systems in both commercial and residential construction.
• Tested and operated variety of electrical components and systems.
• Drafted wiring layouts and developed plans for installation, selecting equipment and fixtures according to code and project specifications.
• Installed safety systems, including emergency lighting, uninterruptible power systems and battery systems.
• Interpreted schematics, blueprints, and diagrams to complete projects on time.
• Examined and created solutions for high voltage electrical system problems.
• Oversaw project management, including diagnosis, wiring and OSHA compliance.
• Evaluated electrical systems, equipment and components to identify and resolve defects and safety risks.
• Troubleshot 0 to 600 volt equipment to identify and address concerns.
• Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
• Traced and diagnosed electrical malfunctions using hand tools and test equipment.
• Connected wires to circuit breakers and transformers.
• Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
• Worked to code on all projects, utilizing drawings and manuals.
• Responded to emergency callbacks and provided onsite support.
• Collaborated with diverse team of architects and electrical and mechanical engineers.
• Worked extensively on three-phase, 277/480 volt power distribution systems.
• Reviewed and assessed electrical, mechanical and architectural diagrams and specifications.
• Installed conduit, wire and motor controls.

• Operated equipment such as high-pressure boilers and large commercial air conditioning systems.
• Directed electricians on installation, maintenance and repair on electrical wiring and equipment.
• Installed complicated circuit systems in both commercial and residential construction.
• Tested and operated variety of electrical components and systems.
• Drafted wiring layouts and developed plans for installation, selecting equipment and fixtures according to code and project specifications.
• Installed safety systems, including emergency lighting, uninterruptible power systems and battery systems.
• Interpreted schematics, blueprints, and diagrams to complete projects on time.
• Utilized wide breadth of testing equipment to assess electrical systems, circuit continuity and accessory fixtures.
• Examined and created solutions for high voltage electrical system problems.
• Oversaw project management, including diagnosis, wiring and OSHA compliance.
• Evaluated electrical systems, equipment and components to identify and resolve defects and safety risks.
• Troubleshot 0 to 600 volt equipment to identify and address concerns.
• Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
• Traced and diagnosed electrical malfunctions using hand tools and test equipment.
• Connected wires to circuit breakers and transformers.
• Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
• Worked to code on all projects, utilizing drawings and manuals.
• Responded to emergency callbacks and provided onsite support.
• Tested entire electrical assembly for performance levels and safety concerns.
• Collaborated with diverse team of architects and electrical and mechanical engineers.
• Worked extensively on three-phase, 277/480 volt power distribution systems.
• Performed electrical utility services for industrial based and new building projects.
• Installed conduit, wire and motor controls.

• Completed semi-skilled and skilled work under supervision of fully qualified supervisors.
• Transported tools, materials and supplies to job locations.
• Kept work areas clean, neat and free of hazards.
• Dug trenches and created holes to pull conduit and install supports.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Adhered to company standards and OSHA regulations for work site safety.
• Maintained organization, cleanliness and safety in all work areas.
• Worked in team-based environment to accomplish projects.
• Followed all relevant electrical and building codes for each job.
• Transported required supplies and employees from headquarters to job site using company vehicles.
• Set up equipment and configured settings for optimal performance.
• Put in new new electrical components, fixtures and motors.
• Demonstrated strong foundation of safety knowledge and implemented industry best practices.
• Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.