Margaret Natalie Martinez

• Identified workforce safety violations and issued violations to maintain integrity of safety program.
• Assisted in accident investigations to determine root causes, prevent future occurrences, and maintain a safe work environment.
• Served as a resource for employees seeking guidance on specific safety-related issues or concerns within their respective roles.
• Supported new hire orientation programs by delivering engaging safety presentations that emphasized the importance of maintaining a safe work environment.
• Conducted ongoing job safety analysis for conformity to personal protective equipment guidelines and occupational safety procedures.
• Increased employee awareness of safety practices through consistent communication and education on safe work procedures.
• Assisted management with accident investigations and analysis to determine root cause for corrective action plan.
• Conducted regular reviews of safety documentation and procedures to ensure accuracy, consistency, and compliance with regulatory requirements.
• Maintained accurate records of all incidents, near misses, and safety observations to track trends and identify areas for improvement.
• Provided assistance in managing health and safety programs aligned with industry standards.

• Managed teams of over 30 multi-craft workers in painting and scaffold building.
• Directed daily operations, prioritized tasks, and ensured work was performed safely and efficiently.
• Inspected scaffolding for stability and compliance with OSHA and site-specific standards.
• Conducted daily toolbox talks, JSA reviews, and safety walkthroughs.
• Ensured proper surface prep, blast profiles, and coating specs met project and QC requirements.
• Collaborated with project managers to coordinate permits, access, and material delivery.
• Trained and mentored new hires and monitored performance for quality and safety compliance.

Hazardous Materials (OSHA 2015) |Permit-Required Confined Space Entry (OSHA) Machinery and MachineGuarding Standards (OSHA 2045) | Principles of Ergonomics(OSHA 2255)

Completed seminars on recordkeeping rules, industrial hygiene, and respiratory protection.

• Job Site Safety Inspections
• JSA / JHA Preparation and Enforcement
• Confined Space and Hot Work Permit Monitoring
• Fall Protection / PPE Compliance
• Incident Reporting & Near Miss Tracking
• Toolbox Talks / Daily Safety Meetings
• Safety Data Sheet (SDS) Management
• Hazard Identification and Mitigation
• Lockout/Tagout (LOTO) Observations
• Safety Walkdowns with Management / Clients

• Supervised field crews to maximize quality and work efficiency.
• Studied and interpreted blueprints to plan construction phases and team assignments.
• Reduced safety incidents by implementing and enforcing strict safety guidelines and protocols.
• Verified and submitted team timesheets.
• Collaborated with management and fellow supervisors to organize operations and achieve demanding schedule targets.
• Interacted with employees to demonstrate high standards and mitigate issues effectively.
• Consistently met deadlines under pressure through diligent time management abilities.
• Inspected work for compliance with applicable regulations and job specifications.
• Ensured timely completion of projects by developing and maintaining schedules for work progress.
• Site Preparation & Grading Support
  Concrete Formwork & Finishing Assistance
  Rebar Placement & Tying
  Surface Prep & Industrial Coatings
  Blueprint & Site Plan Reading
  Confined Space Awareness
  Fall Protection & Scaffold Safety
  Equipment & Tool Operation
  Lockout/Tagout Procedures
  Quality Control (Paint & Coatings)
  Hazard Identification & Risk Mitigation
• Cave in preventing
• Water accumulation control
• Heavy equipment safety

• Promoted a safety-first culture by providing ongoing coaching, feedback, and support to staff members.
• Participated in safety meetings by answering questions from staff members.
• Enhanced workplace safety by conducting regular inspections and identifying potential hazards.
• Monitored safety practices of new and existing employees.
• Kept main work areas free of debris and obstacles that could cause falls and mishaps.
• Completed workplace safety and hazard inspections.
• Evaluated new tools or equipment for safety concerns, ensuring proper training and guidelines were in place prior to implementation.
• Led safety committee meetings, fostering open communication among team members regarding workplace concerns and improvement opportunities.
• Analyzed onsite incidents and instituted precautionary measures to reduce risk and severity of workplace injuries.
• Inspected work practices and procedures for compliance with company and federal regulations.

• Remove and apply insulation
• Rack/stack material
• Build scaffolding
• Maintain clean work areas and contain the area from any contaminants
• Perform various hand, sanding operations on medium to small size castings for the purpose of cleaning and surface improvement
• Observe and audit materials and hazards
• Analyze, safety and data trends, deficiencies, or improvements
• Conduct weekly safety meetings
• Revise JSA’s daily
• Clean or prepare construction sites to eliminate possible hazards.
• Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.
• Tend pumps, compressors, or generators to provide power for tools, machinery, or equipment or to heat or move materials, such as asphalt.
• Read plans, instructions, or specifications to determine work activities.

• Rack/stack material
• Remove/apply insulation
• Build scaffolding
• Sandblasting and brushing and roll
• Painting application using conventional spray/airless spray
• Sandblast tanks & tank liners blow down cleanup, sand
• Operating power tools and hand tools, bristle blasters to remove corrosion and prepare for coating
• Read work orders and receive instructions from supervisor to determine work requirements
• Write daily job safety analysis
• Discuss job task and perform walk through with supervisor
• Observations and inspections on materials / equipment
• Cut stencils and brush or spray lettering or decorations on surfaces.
• Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly.
• Calculate amounts of required materials and estimate costs, based on surface measurements or work orders.
• Mix and match colors of paint, stain, or varnish with oil or thinning and drying additives to obtain desired colors and consistencies.
• Erect scaffolding or swing gates, or set up ladders, to work above ground level.
• Apply paint, stain, varnish, enamel, or other finishes to equipment, buildings, bridges, or other structures, using brushes, spray guns, or rollers.

• Write JSA to understand job scope for prepping and painting, using power tools, and hand tools
• Review work permit to understand job task, attend safety meetings
• Clean specified surfaces, inspected finish work and communicated with managers to ensure full adherence to procedures
• Operated and maintained professional sandblasting, equipment and tools to sandblast and coat mainline pipes, and fittings
• Recognize and reduce the risk of potential hazards
• Identifying hazards and risk factors
• Conduct pre-task planning
• Conduct a job safety analysis
• Attend safety meetings
• Read plans, instructions, or specifications to determine work activities.
• Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.
• Clean or prepare construction sites to eliminate possible hazards.

• Conducted fireproofing procedures.
• Rack/stack material
• Construct scaffolding for construction projects.
• Removed insulation efficiently when necessary.
• Conduct inspections on tools and equipment before utilization.
• Make sure all scaffolds are updated
• Read job safety analysis, and instructions from supervisor to determine work requirements
• Place stencils on pipeline with spray paint/brush roll
• Perform observations
• Perform weekly safety, inspections, and audits
• Review job safety analysis
• Conduct daily safety meetings
• Smooth surfaces, using sandpaper, scrapers, brushes, steel wool, or sanding machines.
• Apply primers or sealers to prepare new surfaces, such as bare wood or metal, for finish coats.
• Achieved finish removal through water blasting and various abrasive procedures.
• Calculate amounts of required materials and estimate costs, based on surface measurements or work orders.
• Erect scaffolding or swing gates, or set up ladders, to work above ground level.

• Increased productivity by utilizing heavy machinery such as excavators, bulldozers, loaders, and cranes for various tasks.
• Assisted in the successful completion of large-scale civil projects including roadways, bridges, tunnels, dams, and commercial buildings.
• Loaded, unloaded, and moved material to and from storage and production areas.
• Operated heavy machinery to execute site preparation and excavation tasks efficiently.
• Sloping
  Benching
  Trench box (shielding)
  Shoring systems
• Position pipe using chain falls or come-alongs
  Align pipe ends
  Install temporary supports
  Check root gap and alignment
  Install bolts (hand tight) if flanged
• Install gasket correctly
  Insert bolts evenly
  Apply lubricant if required
  Torque bolts in star pattern
  Use calibrated torque wrenc