Mark Buff
Rocky Face,GA
Summary
Results-driven welding professional with extensive experience at Code Welder, specializing in gas tungsten arc welding and pressure vessel fabrication. Proven track record of enhancing operational efficiency and safety compliance while training junior operators. Committed to delivering high-quality work and fostering a culture of excellence and teamwork.
Overview
10
10
years of professional experience
Work History
Premier Bowler
Code Welder
Ringgold GA
12.2025 - Current
- Welded parts using arc, gas-shielded arc, submerged arc, and gas equipment.
- Bolted, clamped and tack-welded parts to secure components prior to welding.
- Operated and maintained boiler systems to ensure optimal performance and safety compliance.
- Monitored pressure, temperature, and water levels to maintain efficient boiler operations.
- Conducted routine inspections and preventive maintenance on equipment to minimize downtime.
- Responded promptly to alarms and system malfunctions, implementing corrective measures as needed.
- Trained junior operators on operational procedures and safety protocols for boiler management.
- Developed standard operating procedures that improved operational efficiency and reduced risks.
- Collaborated with maintenance teams to troubleshoot issues and enhance overall system reliability.
- Implemented energy-saving techniques that contributed to reduced fuel consumption in boiler operations.
- Maintained boiler room log by recording meter and gauge data readings, water test results and quantity of fuel consumed.
- Assisted in emergency situations, quickly addressing malfunctions to minimize damage and ensure employee safety.
- Managed inventory of spare parts and tools, maintaining an organized workspace for efficient repairs.
- Monitored heating and cooling system performance through alarms, temperature and pressure differentials.
- Observed pressure, temperature and draft meters to verify correct operation of automatic combustion control systems, feed water regulators and burners.
- Observed boiler and auxiliary units to detect malfunctions, change burners and tighten pipes and fittings.
- Adjusted valves and controls to set specified water level and steam pressure of boiler.
- Ensured consistent steam production, closely monitoring pressure levels and adjusting accordingly.
- Maintained compliance with industry regulations, ensuring proper documentation and reporting of all inspections.
- Conducted thorough inspections of boilers and related equipment, identifying potential issues before they became costly problems.
- Worked closely with other departments to coordinate activities such as shutdowns or equipment replacements efficiently.
- Increased boiler efficiency by conducting regular maintenance and adjustments to boiler systems.
- Scheduled and assigned preventive maintenance for boiler and mechanical equipment.
- Verified appropriate degree of water softness by maintaining chemical treatment programs and regulating steam flow.
- Delivered regular reports on boiler performance metrics to management, providing insights into opportunities for improvement or optimization efforts.
- Used automatic gas feeds and pumps to fire gas-fed boilers.
- Reduced downtime and increased productivity with proactive troubleshooting and problem resolution.
- Coordinated with external contractors/vendors when required for specialized repairs or parts procurement.
- Collaborated with engineering team to implement system upgrades, resulting in improved performance.
- Used chemical testing kits and oxygen scavengers to test and treat boiler feed water.
- Enhanced safety protocols by implementing comprehensive training programs for new hires.
- Provided technical support during plant expansions, assisting in the installation of new boiler systems as needed.
- Participated in annual audits from regulatory agencies ensuring full compliance with established guidelines.
- Trained Number new operators on job responsibilities and safety issues and standards.
- Evaluated new technologies for potential implementation into existing systems, staying current on industry trends.
- Optimized energy consumption by constantly monitoring boiler operations and making necessary adjustments.
- Trained junior operators on best practices for safe operation of boilers along with essential maintenance tasks.
- Implemented energy conservation measures, contributing to company-wide sustainability initiatives.
- Increased boiler combustion efficiency Number% and lowered emissions by optimizing burner performance.
- Completed preventive maintenance on machines to enhance production and maintain quality.
- Developed preventative maintenance schedules, leading to a reduction in unscheduled repairs and equipment failures.
- Collected and tested water samples from cooling towers and other systems.
- Oversaw start-up, operations and shutdown procedures.
- Inspected systems, equipment and components to determine maintenance needs.
- Used testing devices to locate machinery issues and make necessary adjustments.
- Conducted preventive, corrective and predictive maintenance actions.
- Worked with large HVAC systems such as boilers, chillers and furnaces.
- Tested and repaired fire and sprinkler alarm, electric clock, and security access systems.
- Interpreted blueprints and technical drawings to ensure precise weld placements.
- Maintained accurate records of welding activities and materials used for reporting purposes.
- Inspected welds and checked critical measurements to meet specifications.
- Fabricated shop parts directly from blueprints.
- Maintained a safe working environment through strict adherence to safety protocols and guidelines.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Examined structure and texture of parts to detect imperfections.
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Chipped off excess weld, slag, and spatter using hand tools.
- Set up and operated shielded metal arc and gas metal arc welding equipment.
- Conducted special welds with extremely low tolerances for industrial operations.
- Interpreted verbal and written instructions from work orders and welding blueprints.
- Detected faulty operation of equipment and defective materials and promptly resolved issues.
- Salvaged and rebuilt parts to achieve cost savings and reduce waste.
- Repaired manufactured products by dismantling, straitening, reshaping, and reassembling parts.
- Blew out machines, checked welding leads, and wiring and changed filters for preventive maintenance.
- Operated robotic cells machinery.
- Assembled structural forms such as boiler parts and pressure vessels.
- Observed hydrostatic and dimension tolerance tests to evaluate weld quality and conformance to specifications.
- Used MIG gun arc to melt and deposit metal from electrode to workpieces.
- Maximized weld strength by selecting appropriate filler materials based on the specific requirements of each project task set forth in job orders.
- Consistently maintained a clean workspace, reducing potential hazards and increasing overall workplace safety levels.
- Minimized equipment downtime with regular maintenance checks, ensuring continued high performance during critical project phases.
- Demonstrated versatility in multiple welding methods such as GTAW, SMAW, GMAW to meet diverse project needs effectively.
- Assisted junior welders in honing their skills, fostering a supportive team environment focused on growth and excellence.
- Increased client satisfaction by delivering high-quality welds that met or exceeded industry standards.
- Consistently met project timelines through effective time management and prioritization of tasks.
- Ensured proper storage of consumables like electrodes, filler wires in a controlled environment to maintain quality and consistency.
- Improved overall project quality by providing expert advice on best welding practices and techniques.
- Expanded professional knowledge by attending industry workshops and training sessions regularly.
Millwright
Weems Engineering
Dalton GA
04.2021 - 12.2025
- Engineered and constructed structural components in strict adherence to specifications and blueprints.
- Fabricated metal components using MIG and TIG welding techniques.
- Fabricated and assembled pipe systems using MIG and TIG welding techniques.
- Interpreted blueprints to determine project specifications and requirements.
- Conducted quality inspections to ensure compliance with industry standards.
- Collaborated with team members to streamline workflow and enhance productivity.
- Maintained tools and equipment for optimal performance and safety compliance.
- Trained junior welders on best practices and safety protocols in welding operations.
- Implemented process improvements that reduced downtime during assembly tasks.
- Led safety meetings to promote best practices and hazard awareness among crew members.
- Welded in flat, horizontal, vertical, and overhead positions.
- Maintained correct arc length and movement speed to form specified fusion depth and bead.
- Increased weld quality by utilizing appropriate techniques such as TIG, MIG, and Stick welding processes.
Manual Labor
Webco Llc
Dalton GA
02.2016 - 05.2020
- Operated various types of heavy machinery for efficient movement of goods within the warehouse, reducing manual labor demands.
- Reduced manual labor costs by automating repetitive tasks using custom scripts and macros where appropriate.
- Performed manual labor, heavy lifting and shoveling to support plant clean-up and maintenance.
- Spearheaded the adoption of new technologies for inventory management, streamlining processes, and reducing manual labor requirements.
Education
GED -
Murray County High School
Chatsworth GASkills
Gas tungsten arc welding
Pressure vessels
Joint preparation
Vertical welding
Horizontal welding
Flat position welding
Blueprint reading
Proper torch angles
Flux core welding
Hand tool use
Voltage adjustment
Safety awareness
Welding procedure specifications
Personal protective equipment
Power tool use
Welder troubleshooting
Welding certification
Dependable and responsible
I take pride in all my work & do it correctly
Timeline
Premier Bowler
Code Welder
12.2025 - Current
Millwright
Weems Engineering
04.2021 - 12.2025
Manual Labor
Webco Llc
02.2016 - 05.2020
GED -
Murray County High School