Mark Contreras

SITE: Kelsey Seybold Clinic

1001 Campbell Rd, Houston, TX 77057

• Filled out JSA and Job box safety talks with apprentices and helpers before every task
• Received instructions and layout from supervisor/foreman for the day and ensured the tasks were completed according to the Prints and Specifications of the job.
• Read Blueprints: MEP and Architectural drawings Issued by the Electrical Engineer. One line diagrams
• Be knowledgeable in the NEC book and NFPA-70E
• Follow all OSHA and company safety policies
• Install Temporary Power and lighting throughout entire jobsite.
• Bend EMT conduit using ( Foot benders, Hydraulic benders & Electric benders)
• Pull Wire (Feeders, lighting and power branch circuits, Fire Alarm cabling, Data Cabling)
• Rough in walls
• Install Electrical Panels 480v/277v systems & 220v/120v systems
• Install grounding Systems
• Install 3 phase transformers
• Fire Alarm systems
• Install Light Fixtures, switches, Outlets.
• Wired up Motors and HVAC components
• Install lighting controls
• Security systems ( Card readers, Cameras, Keypads)
• Proved successful working within tight deadlines and fast-paced atmosphere.
• Used Microsoft Word and other software tools to create documents and other communications.
• Carried out day-day-day duties accurately and efficiently.
• Participated in continuous improvement by generating suggestions, engaging in problem-solving activities to support teamwork.

General Motors Plant: Retool/Shutdown

• Assisted with demo and upgrade of robotic welders, conveyor systems, paint booths and assembly lines robots.
• Participated in LOTO procedures everyday before work started. Ensured system was Air Gapped and performed LDL procedures on equipment.
• Pulled 3-pin, 4-pin and 5-pin cables through cable trays to new robots.
• Installed cable tray in and around equipment
• Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment and handling of materials.

South Texas Solar Farm; El Campo TX

• Installed Solar Panels
• Pulled Wire through Snake tray
• Installed wire taps to trunk lines for each row of panels
• Installed Jumpers from panel to panel in series
• Installed Disconnects and Terminated wires
• Set Inverters and wired Primary and secondary terminals
• Operated forklifts to set up wire reels
• Observed company safety rules and regulations to minimize workplace accidents and reduce electric shocks.

Mazada/Toyota Manufacturing Plant; Cafeteria/Gym/Locker Rooms

• Build out Electrical Rooms ( Install all Electrical Panels; Power, Lighting, Equipment)
• Install all Homerun Conduits through out entire area on racks and tie into panels inside electrical rooms.
• Pull all Homerun wire of different sizes according to wire schedule
• Installed and maintained overhead and underground electrical power lines and auxiliary equipment.
• Added or removed wire to shorten or lengthen lines, using various types of splices, connectors and clamps.
• Observed company safety rules and regulations to minimize workplace accidents and reduce electric shocks.
• Worked on both dead and energized lines.
• Worked flexible hours; night, weekend, and holiday shifts
• Ensured project came under budget and on time by customer finish date
• Diagnosed issues and developed effective solutions
• Increased project success by diagnosing faults and removing defective components while repairing and restoring equipment and systems
• Increased customer satisfaction ratings by effectively repairing systems

Data Center: Entire Electrical building

• Inspected products and worker progress throughout production.
• Estimated financial requirements of new projects.
• Recorded, analyzed and distributed statistical information.
• Collaborated with audit clients and action owners to apply root cause analysis guidance and establish effective corrective action plans.
• Tracked quality issues with external customers, suppliers and internal plant operations.
• Collected production samples regularly and performed detailed quality inspections.
• Evaluated interactions between associates and customers to assess personnel performance and implement strategies for customer satisfaction improvement.
• Assured consistent quality of production by implementing and enforcing automated practice systems.
• Established and tracked quality department goals and objectives.
• Scheduled and chaired quality review meetings to review effectiveness of performance mitigating risk, improving throughput and achieving customer satisfaction.
• Applied coaching techniques and tools to support managers and team members in improving performance.
• Served customers and followed outlined steps of service.
• Proved successful working within tight deadlines and fast-paced atmosphere

• Texas Children Woman/Maternity Building
• Exxon Mobile Headquarters Woodlands: CUP Central Utility Plant
• Dow Chemical Office/Laboratory Buildings Lake Jackson,TX
• Memorial Herman Expansion Medical Center Houston Texas
• Analyzed blueprints to determine where to run wires, install electrical outlets and connect wires to central circuit panels.
• Checked safety credentials and licenses for electrical crew members to comply with corporate rules.
• Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code.
• Analyzed blueprints to diagnose potential electrical hazards and carry out risk assessments prior to starting new jobs.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Worked from ladders, scaffolds and roofs to install electrical wiring, equipment and fixtures.
• Tested continuity of circuits in electrical wiring, equipment and fixtures using Meggers, Multimeters testing devices.
• Enhanced quality control by inspecting condition of equipment and tools.
• Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors and wire and cable cutters to complete fast-paced work.
• Installed, maintained, repaired and tested equipment for electricity generation and utilization.
• Maintained detailed documentation through logging of support cases, e-mail and knowledge base articles for client and internal use.
• Stored and maintained power tools and equipment for each job.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
• Identified areas of potential state safety code violations and implemented revisions.
• Owned and addressed client needs and product issues from inception to resolution.
• Launched troubleshooting and tests on equipment post-installation to confirm compatibility and safety of electrical systems.

Methodist Hospital Medical Center Houston Texas

Planned Parenthood Houston Texas

Northwest Hospital Cypress

Exxon Mobil Campuses- Buffalo Speedway and I-10&hwy 6.

• Road with service truck driver for 1st 2years doing various jobs and different locations
• Pulled through conduits and through holes in walls and floors.
• Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge.
• Assisted Master Electrician in conduit placement inside designated partitions, walls and other concealed areas.
• Worked with Master Electrician and other electricians to provide installation, repair and maintenance for Electrical systems.
• Installed appropriate parts to bring electrical power to audio and visual equipment, signaling devices and heating or cooling systems.
• Checked and performed electrical wiring through conduits and holes in walls and floors.
• Read and interpreted drawings to provide wiring layouts for new installations
• Tested continuity of circuits using test equipment to verify compatibility and safety of systems following installation, replacement or repair.
• Provided layouts for new electrical system and component installations by reading and interpreting drawings accurately.
• Increased job knowledge by participating in educational opportunities and reading technical and regulation publications.
• Organized materials and tools in to maintain clean and neat work areas.
• Fabricated custom and replacement parts according to specifications, using hand tools.
• Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment.
• Studied building schematics to determine location of wiring and equipment.
• Spliced, joined and connected wire to fixtures and other electrical components.