Mark Hall

AM/NS Fluor Gator Project

• Complied with OSHA and company safety guidelines for height safety, lock out tag out, confined space, and hazardous material handling.
• Prioritized safety across job site with specific attention to load suspension, welding, and cutting.
• Elevated team morale by fostering a positive work environment focused on collaboration, open communication, and mutual respect.
• Used appropriate safety measures and encouraged other team members to do same in effort to avoid job site injuries.
• Erected structural steel and iron frameworks for buildings

Cavendish Green Hydrogen Project

• Enhanced safety standards on job sites by conducting regular inspections, enforcing protocols, and providing ongoing training for crew members.
• Prepared and submitted reports on job progress and safety conditions to upper
• Enforced safety regulations, procedures and standards for construction.
• Administered disciplinary actions to workers violating safety regulations and company policies.
• Coordinated with other trades on-site to ensure seamless integration of piping systems within the overall construction project scope.
• Collaborated with project managers to develop detailed work plans, schedules.
• Fostered a positive work environment by promoting teamwork, recognizing achievements, and addressing conflicts in a timely manner.
• Inspected equipment and tools used for safe operation.

Florida City Gas Miami- Safe LNG project

• Supervised layout, assembly and installation of various sizes and types of piping systems.
• Led a highly motivated team that consistently met or exceeded performance expectations while maintaining a positive working environment conducive to collaboration and continuous learning.
• Ensured accurate documentation of all completed work, including detailed records of materials used, labor hours logged, and any changes made during the course of the project.
• Improved overall job site safety by enforcing strict adherence to safety guidelines and conducting regular hazard assessments.
• Inspected equipment and tools used for safe operation.
• Administered disciplinary actions to workers violating safety regulations and company policies.

Crist Reliability Project

• Complied with OSHA and company safety guidelines for height safety, lock out tag out, confined space, and hazardous material handling.
• Used appropriate safety measures and encouraged other team members to do same in effort to avoid job site injuries.
• Maneuvered and positioned support structures before and after pouring concrete, often manipulating iron by cutting, welding, or bending.
• Prioritized safety across job site with specific attention to load suspension, welding, and cutting.
• Erected structural steel and iron frameworks for buildings and other structures.

YCI Methanol Project

• Enhanced crew efficiency through clear communication and collaboration with team members.
• Championed safety culture within the team by being a role model for safe working practices and encouraging open dialogue about potential safety concerns.
• Ensured compliance with OSHA regulations through diligent monitoring of team adherence to safety protocols.
• Managed scheduling and planning of rigging activities, optimizing resource allocation across multiple projects.
• Coordinated with crane operators to ensure accurate lifts, enhancing project completion rates.
• Implemented preventative maintenance programs for rigging equipment, reducing repair costs over time.
• Monitored job progress and performance of employees or contractors to complete projects prior to deadlines.
• Documented construction and extraction workers' hours, wages and other pertinent information.
• Ensured proper load distribution during lifting operations, minimizing the risk of accidents.
• Improved rigging safety by conducting regular equipment inspections and maintenance.
• Trained junior riggers in industry best practices for safe and efficient operations.
• Conducted thorough risk assessments prior to commencing any work activities, mitigating potential workplace hazards.

Cabot Canal Plant

• Increased overall productivity with efficient delegation of tasks to appropriate personnel.
• Maintained strict compliance with OSHA regulations, company policies, and industry best practices throughout all projects undertaken.
• Monitored safety compliance to maintain strict standards and protect team members from harm.
• Inspected completed work to ensure adherence to quality standards before finalizing handover processes with clients or stakeholders.
• Led safety meetings to educate workers on proper protocols, minimizing workplace hazards and injuries.
• Enhanced project efficiency by supervising and coordinating the work of boilermaker crews.
• Conducted regular performance evaluations for team members, providing constructive feedback for professional growth.
• Resolved on-site issues promptly by addressing concerns and implementing corrective actions as needed.
• Interpreted blueprints, sketches, and specifications for each job.

Overview: Citrus County Combined Cycle Project

• Enhanced safety standards on job sites by conducting regular inspections, enforcing protocols, and providing ongoing training for crew members.
• Managed a crew of up to 40 people in the safe work practices, fabrication, installation and testing of underground and above ground pipe
• Some responsibilities were ensuring safety policies and procedures followed, reading drawings, communicating with other crafts, overseeing hydro and pneumatic testing of pipe, and ensuring quality of work
• Conducted regular performance evaluations for team members, identifying strengths weaknesses opportunities for improvement.
• Coordinated with other trades on-site to ensure seamless integration of piping systems within the overall construction project scope.
• Conducted thorough pre-construction reviews of drawings and specifications to identify potential issues before they impacted project progress or budget.
• All work was done while keeping crew and others safe

• Company Overview: Marshall Steam Station Mooresville, NC
• Installed platforms, demolished old water wall tube panels, installed new tube panels, and fit external boiler supports
• Milled and prepped tubes using mill hog
• Measured and cut supports for boiler and installed supports on location
• Demolished old support and tubes using torch and high speed cutting wheels
• Marshall Steam Station Mooresville, NC

• Company Overview: Fabricated Bag House for Welsh Power Plant Pittsburg, TX
• Led a crew of 15 men in successfully completing project on time
• Used drawings to fabricate and check correctness of installation
• Positioned duct work on iron using rigging and flagging crane
• Installed slide and guided plates for growth and support
• Once duct work was installed moved the pipe installation and fabrication led a crew of 15 in installation and fabrication of pipe
• Maintained safety and quality while keeping production on time
• Fabricated Bag House for Welsh Power Plant Pittsburg, TX

• Company Overview: Marshall Steam Station Mooresville, NC
• Installed platforms, demolished old water wall tube panels, installed new tube panels, and fit external boiler supports
• Milled and prepped tubes using mill hog
• Measured and cut supports for boiler and installed supports on location
• Demolished old support and tubes using torch and high speed cutting wheels
• Marshall Steam Station Mooresville, NC

• Fabricated Cold boxes
• Expediter duties included unloading and loading of trucks, delivering materials with jockey truck, operating variable boom forklift, checking invoices and managing inventory, and maintain paper work for inventory
• As an foreman I lead a team of 8 men
• We assembled pipe spools which included rigging and positioning of pipe
• I used drawings to assemble pipe spools and check for correct installation of valves and supports

• Installed platforms, demolished old tube panels, installed new tube panels, and fit pipe supports
• Bull rigged and bolted up iron to build new platforms
• Milled and prepped tubes using mill hog
• Measured and cut supports for pipe
• Installed supports on location
• Demolished old piping and tubes using torch and high speed cutting wheels

• Job responsibilities included rigging and flagging of material with crane and bull rigging pipe to location
• Cut, beveled and fit pipe
• Used torqued wrenches to tighten bolts correctly and installed valves
• Applied underground coating to pipe and checked for defective spots using jeeping device

• Company Overview: Fabricated S.C.R units plant Scherer Power Plant in Juliette, Ga
• Job responsibilities included rigging and flagging of material with crane and bull rigging pipe to location
• Cut, beveled and fit pipe
• Used torqued wrenches to tighten bolts correctly and installed valves
• Part of team that pressure checked pipe for leaks
• Fabricated S.C.R units plant Scherer Power Plant in Juliette, Ga

• Company Overview: Fabricated buildings and equipment at T.K
• Steel mill Calvert, Al
• Expediter duties included unloading and loading of trucks, delivering materials with jockey truck, operating variable boom forklift, checking invoices and managing inventory, and maintain paper work for inventory
• As a rigging lead man I managed a group of five men in setup, maintenance and operation of spider scaffolding
• Also rigged and flagged material using crane
• Fabricated buildings and equipment at T.K
• Steel mill Calvert, Al

• Fabricated JBR Units for power plant in Topeka, KS
• Job duties included torch cutting metal, fitting of duct work, rigging of duct work, and light welding(tacking) of ductwork
• Positioned duct work on iron and installed guide plates in correct locations

• Fabricated S.C.R Units for power plant in Leroy, AL
• Job duties included torch cutting metal, fitting of duct work, rigging of duct work, and light welding(tacking) of ductwork
• Installed filter catalyst baskets in S.C.R
• Unit and removed old duct to make connections for new duct

• Demolished old building damaged in hurricane and replaced with new building
• Job duties included hanging, rigging and bolting up iron beams
• Operating a forklift and torch cutting
• During this time I worked several shutdowns at the Armstrong tile plant in Mobile, AL
• Changed out bearings and made other repairs to the plant