Marshall James

• Complied with OSHA and company safety guidelines for height safety
• Coordinated with crane or signaled equipment operators to lift and position structural steel members and hoist beams, girders and columns to correct positions.
• Aligned holes in members with corresponding holes in previously placed member by drift pins or spud wrench through holes.
• Inserted sealing strips, wiring and insulating material, as called for in blueprints.
• General labor
• reload welding wire and opening new welding rods
• Assist welder with grinding down impurities on beams
• Setting up generators and welding machines

• Welded in flat, horizontal, vertical and overhead positions.
• Set up and operated shielded metal arc and gas metal arc welding equipment.
• Chipped off excess weld, slag and spatter using hand tools.
• Inspected welds and checked critical measurements to meet specifications.
• Prepared welding equipment to perform advanced welding work.
• Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc and shielded metal arc equipment.
• Fabricated shop parts directly from blueprints.
• Minimized warping using good fitting, burning and welding techniques.
• Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
• Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
• Fabricated steel molds for concrete using hand and power tools, welding operations and lifting equipment.

• Layout, fit, and welded all metal components for carports
• GMAW welding process
• Welded 12g and 14g tubing
• Interpreted blueprints, diagrams, sketches, and plans to determine appropriate materials and time frames for projects
• Maintained full set of personal tools to use on jobs.
• Tested welding and safety equipment to check performance.
• Worked correctly with each material such as steel
• Kept work area clean and organized.
• Inspected projects, identified issues that occurred and implemented corrective measures.
• Fabricated steel frames, columns, beams and girders according to blueprints or instructions from site managers.
• Reviewed work plans and blueprints to ascertain all requirements for project.
• Followed safety guidelines to fasten structural steel members and hoisted cables, chains and rope.
• Used appropriate safety measures and encouraged other team members to do same in effort to avoid job site injuries.

• Use reel components to build reels to size specifications
• Place correct reel onto coiler and prepare for startup
• Monitor for continuous stripe
• Used bander and hydraulic staple gun
• Used OD measuring
• Know and understand quality requirements for all products being produced
• Make all checks that may be required to assure that product meets order requirements
• Make corrections as needed to meet order specifications
• Before making necessary adjustments, informs line supervisor
• Ensures wraps on reels are neat
• Cuts conduit, ties-off and caps conduit when each reel is complete
• Remove reel from coiler using forklift and transport finished product into inventory
• Grind line scrap as it is produced and stacks scrap
• Assist line supervisor in line start-ups
• Maintain neat and orderly work area
• Assist other line operators in cutting conduit, tie-offs, and reel changes
• Followed job order for product specifications, dimensions, tolerances and sequence of operations.
• Adjusted machine feed and speed to correct machine malfunctions.
• Checked inventory supply and stock bins to maintain proper stock levels.
• Maintained organized work area by cleaning and removing hazards.
• Made sure that products were produced on time and are of good quality.
• Reviewed production schedules and streamlined processes.
• Loaded and unloaded product on and off conveyor

• Cleaned work pieces to remove impurities using wire brush, portable grinder, hand scraper
• Determined amount of materials and identified appropriate construction locations
• Basic math skill and able to follow instructions
• Ensured work areas were cleaned
• Assisted welders and fitters
• Responsible to inspect entire work area for potential release of flammable vapors
• Utilized Cutting torch, Band Saws, Skill Saws, etc
• Read work orders or receive instructions from supervisors
• Responsible for using various power tools for preparation, and accurately measure metal for cutting and welding
• Set up and operated hand and power tools common to welding trade, such as shielded metal arc and gas metal arc welding equipment
• Welded components in flat, vertical, or overhead positions
• Selected and installed torches, torch tips, and filler rods according to welding chart specifications or types and thicknesses of metals
• Recognize existing and potential hazards and know how to identify these through conducting field level pre-job hazard analysis, checking machine for hazards and assessing any tasks before start
• Examined work pieces for defects; measured work pieces with tools to ensure work order specifications
• Kept positive attitude focused on learning new processes and techniques.

This was a three month job installing solar panels in Los Lunas, NM.

• Worked closely with power tools, electrical panels, and helped wire each panel
• Also had to work closely with team leads
• Maintain clean job site and take material to field
• Bolting up clamps for solar panels
• Setting and installation of solar modules
• Tightening of bolts to proper torque specifications
• Receiving and stocking of materials
• Maintain tools used for installation in proper working condition Qualifications
• Ability to perform heavy physical work, lifting/pushing/pulling material weighing 50-100 pounds
• Ability to bend, stoop, kneel, crouch, squat, crawl etc
• Use of hands, arms, shoulders, upper/lower back
• Problem solving
• Commitment to safety

This was a job with masthead international making crates for INTEL to move heavy machinery around building and to ship.

• Team orientated
• Used hand tools
• Handling and moving heavy equipment
• Pulling, truck loading, packaging, shipping, receiving and material handling
• Operate pallet jack and/or forklift in safe and responsible manner
• Determined appropriate places for storage assuring that stocking and stacking Took safety procedures and product protection requirements
• Wore OSHA hazmat suits to clean hazardous waste
• Ensure warehouse areas were kept clean, dry and free from debris.

• Demolished old buildings and homes for renovation and reconstruction
• Used power tools and sledge hammers to break down walls
• Took safety precautions to make sure buildings were safe before demolishing building
• Followed foreman's instructions
• Cooperated with coworkers for safe and fast work environment.
• Gathered and disposed of worksite debris to remove safety hazards
• Set up ladders, scaffolding, fences and temporary structures to prepare sites and protect public
• Observed safety regulations on job sites to minimize accidents

• Directed traffic away from hazardous locations to protect team members and general public
• Collected measurements and marked locations as part of project preparations
• Signaled and supported equipment operators with moving through sites and securing special attachments
• Set up ladders, scaffolding, fences and temporary structures to prepare sites and protect public
• Operated power equipment to move materials and promote job efficiency
• Loaded and removed debris from sites to keep areas clean and avoid safety concerns
• Prepared job sites for work plans by measuring and marking different distances
• Operated heavy equipment and machines to break down masonry, drywall and brick
• Wore mandated safety equipment and used correct procedures for total site safety
• Used sledgehammers, drills and hydraulic tools for detail work prior to full demolition
• Operated jackhammer, cutting saws and other power tools for demolition work
• Placed roll-off dumpsters in optimal locations to collect bulk debris
• Demonstrated respect, friendliness and willingness to help wherever needed

• Helped wire lights for signs and put up Aluminum composite panels on side of buildings
• Performed electrical installations, maintenance and repairs in homes and small businesses
• Operated hand and power tools correctly to minimize risks of damage, shock or personal injury
• Installed light fixtures in existing structures and new constructions
• Kept work vehicle clean and neat to give professional appeal to current and potential customers
• Measured, cut and pulled wire for residential and commercial work
• Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge