Masada Hill

• Formatted and wrote Pre task Plan for all task to be authorized by GC prior to any work engagement onsite.
• Structured company policies and site specific orientation for new hires to ensure site compliance.
• Conducted aerial lift, roof access, and spotter training for new hires .
• Spearheaded incident prevention initiatives by proactively addressing identified areas of concern within the workplace environment with weekly toolbox talks containing information of current and trending incidents
• Evaluated effectiveness of current safety culture within contractors by analyzing data trends related to accidents, injuries, or near misses occurring onsite.
• Implemented and enforced new company protocols based off deficiencies identified during observations.
• Mentored junior safety team members on proper techniques for hazard identification, risk assessment, and incident reporting procedures.

• Developed and implemented site safety action plan for board of Project Superintendents to assist in them gaining site access .
• Attended and participated in site wide safety management meetings to ensure contractors compliance.
• Constantly monitored and critiqued activities and PPE with skilled tradesman where needed.
• Prepared and presented comprehensive reports to upper management and audit team, covering issues and recommendations.
• Conducted company site specific orientation and aerial lift training for all new hires.
• Performed task analyses to evaluate potential risks and developed risk mitigation strategies to better support safe productivity.
• Completed paperwork, recognizing discrepancies and promptly addressing for resolution.
• Conducted LOTO audits ,inspected the quality of all inspection forms and task specific PPE.
• Gathered information, prepared reports, and drafted site correspondence for all affected cases.
• Consulted with contractors on best practices , interfaced daily with project management for all process improvements and regulatory initiatives.
• Managed full task cycle of JSA audits in alignment with contractors scope, delivering progress as well as closing reports to senior management and clients.
• Inspected facilities for adherence to fire, hazard, and safety guidelines.
• Assessed value of hazards to apply modifications and improvements on all SFEMA and JHA prior to submittal.
• Responded to any emergencies as instructed and with utmost time efficiency.

• Checked written JSAs and permits for adherence to to site regulations.
• Reduced safety incidents by training and teaching risk management techniques, hazard identification, quality checks and proper training documentation.
• Gathered information, prepared reports, and drafted correspondence related to cases.
• Recognized, documented and advised on removal of hazards ,damaged tools and equipment.
• Wrote reports outlining safety issues and potential correction options.
• Attended Tesla contractor safety meetings
• Investigated accidents and hazardous incidents to determine cause and made recommendations for corrective action.
• Wrote safety program plans to manage hazards, reduce incidents and save company money through less time lost and lower insurance payouts.

As lead safety for the General Contractor I Performed and administered site specific orientation for all employees and subcontractors associated in compliance with the TCSR.

• Attended daily meetings with MTM, ORO and Civil GC to better assist in daily production task.
• Constructed and enforced COVID 19 awareness and prevention plan
• Performed full scope walk thru's to find fix and ensure no repeats of any infractions.
• Maintained all OSHA 300 Logs, training data and task specific documents associated with my client and their subcontractors.
• Revised, implemented and enforced Site Emergency Action and evacuation plan.
• Assisted in worksite incident investigations, helping to determine cause and fault to ascertain liability.
• Drafted guidelines for hazard control programs such as fall protection, electrical safety and air quality guidelines.
• Supported safety inspection, providing information and facilities guidance to OSHA inspectors during walk-throughs.
• Oversaw safety strategy progress and maintained compliance with deadlines to support standards and process optimization for over 100's of workers.
• Evaluated potential health hazards or possible damage from product misuse.

Provided safety coverage during all phases of task for Prime Contractor and all Subcontractors associated with them.

● Conducted safety toolbox talks prior beginning of shift and if ever changes were made during on going task performed.

● Performed safe work observations during walk down of foot print. Corrected , coached and revised any discrepancies found during audit of PTA's ,Permits, and or Daily Worker Engagement Sheets.

● Secured and barricaded proper exclusion zone prior to Overhead work performed on Trim, Truss or Roof during Demolition.

● Observed task performed by Heavy Equipment Operators and ensured the compliance of all parties involved and in area during Demolition of Tooling, Booths, Cells and Conveyors

● Attended and partook in daily safety meetings with all safety managers associated with project and client appointed site safety delegates .

● Directed traffic away from hazardous locations, protecting team members and pedestrians in area.

● Investigated accidents and hazardous incidents to determine cause and made recommendations for corrective action.

● Worked directly with management, and production department to brainstorm, discuss strategy and internally mitigate any issues.

● Verified data integrity and accuracy of Placards prior to Energy Isolation to ensure the proper PDP and all energy associated with area where task was to be performed were properly locked out prior to beginning of any task preformed. Researched and updated all required materials needed for Prime and our Subs to stay compliant with both OSHA and Site Specific Requirements. ●

• Designed programs, policies, and procedures that were implemented to reduce or eliminate workplace injuries and hazards.
• Tested welders for understanding of code and proficiency in different environments.
• Conducted safety audits, walk downs and investigations of construction site and  quality issues.
• Regularly inspected all job sites to ensure that they met fire, hazard and safety guidelines.
• Reviewed specifications in order to assess contractor compliance with design, training and implementation. 
• Developed new training programs to address performance and knowledge issues.
• Recommended changes to company culture in order to improve safety and meet changing demands.
• Administered OSHA 10 and OSHA 30 certification training to  all new hires and staff as needed.
• Walked down site foot print continuously performing safety color coding checks on all equipment, PPE, and tools.
• Ensured all permits and Job Hazard Analysis were properly filled out and safely executed prior to beginning of any task.
• Monitored subcontractor operations and applied effective time, resource and money management strategies to delivery under-budget project completion.
• Conducted all critical pre-installation Conferences with general Contractors, subcontractors, Consultants and manufacturer’s representatives.
• Oversaw the entire building turnover process, while enhancing communication between all construction management.
• Supervised operations to execute quality control and resolve developing issues.
   
• Conducted all critical pre-installation Conferences with general Contractors, subcontractors, Consultants and manufacturer’s representatives.
• Used schematic diagrams to plan work and constructed or procured new ones when needed.

• Conducted morning safety meeting and tool box talk with all onsite employees to touch basis on and heighten awareness of task related, environmental and foreseeable hazards prior to performance initiation.
• Trained company employees technique to properly weld intricate parts.
• Met daily with site superintendent, site supervisor and client CRC to recover and revisit scheduled task of the day , work load and crew placement.     
• Authored company site and task safety reports detailing issues and options for correcting problems.
• Conducted regular inspections of ongoing task at facility to ensure that they were compliant with fire, fall hazard, company and customer safety guidelines.
• Instructed staff during fire drills so that they were aware of the proper evacuation routes and reporting techniques.
• Trained new and current employees on proper PPE usage, hazard communication, power safe generation training, MMVF, proper footing\body positioning, vehicle safety and any task or site related training required.
• Responded to any emergency situations in the most efficient, effective ways possible.
• Aided in the developed of company safety plans to reduce safety problems and mitigate any foreseeable issues.
• Studied permits and ensured worker compliance and environmental safety in accordance to permits, policies and procedures set forth by company, client as well as OSHA standards and regulations.
• Observed non-entry rescues and summoned emergency personnel and services if unable to help. 
• Worked overtime, including evenings and weekends, to respond to emergencies and or HOT jobs that required immediate crew response.
• Responsible for promoting safe and clean working environment.
• Performed multiple walk downs of ongoing task to observe, audit and if need be correct actions of crew members.
• Met monthly with The Event Free Council and Safety Board as a member to commute, review, discuss and interpret safety events and concerns of both the site as well as fleet wide. 
• Di vised and implemented crew \ individual incentive program to promote and better engage team members in Hazard Awareness and Good Catch Program.  
• Signaled equipment operators to align machinery.
• Examined documents such as permits, applications and records for each location.
• Validated schematic designs working alongside hardware engineers.
• Conducted inspections of pipeline, metal parts and  gas welding equipment as specified by layout, welding diagram, or work order.

• Proper supervision of all subordinates assigned to task on and off site.
• All training of new personnel in Hazard communication, Equipment Operations and proper blasting protocols.
• Observation and if needed correction of all improper excavation protocols .
• Completion and management of daily time sheets.
• Payroll discrepancy forms to corporate office as needed.
• Developed new process for employee evaluation which resulted in marked performance improvements.
• Obtained documents, clearances, certificates and approvals from local, state and federal agencies.
• Accurately completed service reports and warranty forms.
• Followed standards and procedures to maintain safe work environment.
• Presented clear, organized data in graphs, charts, tables and written reports.
• Maintained compliance with company standards to perform all maintenance activities.
• Oversaw Inspection of all machines and equipment to be utilized prior to all task. 

• Conduct, coordinate and enforce all actions of operations per customer/ site specifics and Osha compliance standards.
• Proper walk thru of job scopes.
• Develop, implement and enforce proper safety programs to ensure the decrease in safety concerns and Osha recordables.
• Conduct daily safety meetings and safety audits, interpret and inform management of relevant Federal, State, and local laws regarding hazardous materials in order to be and stay compliant.
• Proper record keeping and performing of all accident investigations/ processing of worker's compensation claims.

• Conducted pre-post job safety meetings.
• Wrote welding policies and specifications for jobs.
• Obtained documents, clearances, certificates and approvals from local, state and federal agencies.
• Preformed multiple PPE and safety audits on all individuals associated with on going task performed.
• Proper record keeping and filing of all task undergone by crews and first aids.
• Construction and enforcement of proper safety plans and utility schematics insuring no lines were damaged nor disrupted during task.
• Weighing facts and possible solutions on which to base sound decisions.
• Monitored project expenses and developed pre-construction estimates.
• Maintained a written daily log of activities on the job site.
• Implemented changes requested by designers, owners or inspectors to conform to specifications or updated demands.
• Kept track of all inventory, including supplies and materials to help ensure against loss.
• Gathered project material submittals and maintained records of approvals.
• Mentored junior team members, providing guidance on proper techniques and safety.
• Reduced downtime during production by maintaining equipment and reducing unnecessary maintenance.
• Validated schematic designs working alongside hardware engineers.
• Performed pre- and post-trip inspections on trucks and equipment to immediately identify issues that required repair.
• Designed safety strategies to meet company needs and supported implementation in all areas.