MATTHEW REMONDINO
Summary
Hardworking field service technician bringing 12+ years of experience performing diverse maintenance and repair duties. Dedicated to maintaining optimal equipment functionality by managing routine and complex equipment and facility matters. Strong knowledge of hand and power tool operation and safety measures.
Overview
12
12
years of professional experience
Work History
Field Service Technician
Pierce Pacific MFG.
12.2020 - Current
- Managed on-site and off-site installation, repair, maintenance, and test tasks.
- Installed new equipment and explained operation and routine maintenance protocols to customers.
- Followed safety procedures to avoid injuries in field.
- Proficient in Dasa and Danfass software.
- Operated hand tools and power equipment.
- Responded quickly to emergency maintenance requests for timely on-call support.
- Completed partial or full dismantling of equipment to quickly repair or replace defective components and restore functionality.
- Provided technical support to troubleshoot, repair and maintain operational efficiencies in hydraulic, mechanical, and electrical systems.
- Established positive customer relationships by providing punctual, cost-effective solutions.
- Discussed and recommended service options with customers and explained costs involved.
- Replaced defective parts of machines and adjusted clearances and alignment of moving parts.
- Inspected and examined all machinery and equipment to detect malfunctions or irregularities.
- Operated machine tools to fabricate parts during overhaul, maintenance, or setup of machineries.
- Aligned and leveled machines using precision measuring instruments to avoid unnecessary wear and tear.
- Assessed and tore down parts such as pumps, motors and cylinders in different pieces of equipment.
- Welded in flat, horizontal, vertical, and overhead positions.
- Inspected welds and checked critical measurements to meet specifications.
Field Service Technician
JEWELL ATTACHMENTS/STANLEY BLACK & DECKER
05.2018 - 12.2020
- Disassemble and reassemble heavy equipment with upgraded parts
- Build electrical boxes
- Proficient in IQAN software
- Troubleshooting electrical, mechanical, and hydraulic components
- Troubleshoot electrical systems using ladder logic
- Weld/Fit new components
- Retrofit old/new equipment
- Assemble and install hydraulic systems in the field
- Teach customer how to maintain and use hydraulic/electrical equipment
- Fill out and file all required reports
- Travel around the United States at a moment's notice to troubleshoot and repair equipment
- Operate safety equipment and use safe work habits
- Weld components in flat, vertical, or overhead position
- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding
- Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers
- Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations
- Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools
- Dismantle and reassemble heavy equipment using hoists, hand tools and power tools
- Operate and inspect machines or heavy equipment to diagnose defects
- Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications
- Read and understand operating manuals, blueprints, technical drawings and schematics
- Schedule maintenance for industrial heavy equipment and keep equipment service records
- Connect regulators to test stands, and turn screw adjustments until gauges indicate that inlet and outlet pressures meet specifications
- Record maintenance information, including test results, material usage, and repairs made.
- Installed new equipment and explained operation and routine maintenance protocols to customers.
- Managed on-site and off-site installation, repair, maintenance, and test tasks.
- Responded quickly to emergency maintenance requests for timely on-call support.
Millwright
HAMPTON LUMBER MILL
11.2016 - 04.2018
- Whistle chase and keep the mill running
- Reassemble machines to proper spec after a repair or maintenance work
- Perform preventative maintenance, repair and lubricate machines and equipment
- Weld, repair and fabricate equipment or machinery
- Aline motors to shafts, arbors and sprockets using alignment tools, shims and pusher bolts
- When repairing machines or equipment look for the root cause and document it
- When performing preventative maintenance rite down and file all repairs needed
- Troubleshoot equipment, hydraulic, pneumatic, and other mechanical systems
- Test equipment after repair or assembly to ensure proper performance
- Repair, setup and aline bearings
- Track, repair and maintain conveyors
Field Service Representative
COLUMBIA INDUSTRIES
12.2011 - 10.2016
- Weld/Fit new components
- Retrofit old equipment
- Assemble and install hydraulic systems in the field
- Teach customer how to maintain and use hydraulic equipment
- Fill out and file all required reports
- Travel around the world at a moments notice to troubleshoot and repair equipment
- Operate safety equipment and use safe work habits
- Weld components in flat, vertical, or overhead positions
- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding
- Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers
- Analyze engineering drawings, blueprints, specifications, sketches, work orders, andmaterial safety data sheets to plan layout, assembly, and welding operations
- Repair products by dismantling, straightening, reshaping, and reassembling parts, usingcutting torches, straightening presses, and hand tools
- Dismantle and reassemble heavy equipment using hoists and hand tools
- Operate and inspect machines or heavy equipment to diagnose defects
- Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications
- Read and understand operating manuals, blueprints, and technical drawings
- Schedule maintenance for industrial machines and equipment, and keep equipment service records
- Connect regulators to test stands, and turn screw adjustments until gauges indicate that inlet and outlet pressures meet specifications
- Record maintenance information, including test results, material usage, and repairs made
- Test valves and regulators for leaks and accurate temperature and pressure settings, using precision testing equipment
- Examine valves or mechanical control device parts for defects, dents, or loose attachments, and mark malfunctioning areas of defective units
Education
High School Diploma -
FOREST GROVE HIGH SCHOOL
FOREST GROVE, OR06.2007
Skills
- Familiar with different brands and models of excavators, bulldozers, loaders, forklift, man Lifts, skid steers, cranes, and their attachments
- Service Records Management
- 609 certification by Mobile Air Conditioning Society
- ATMT Certified for electrical trouble shooting and preventive maintenance
- Certified welder in D11 SMAW, GMAW, FCAW
- Certified in VT and MT weld inspection under Triple J Inspection
- TBOSIET Certification
- MSHA Certification
- Proficient in hand, hydraulic and pneumatic tools
- Troubleshooting
- Read and understand hydraulic and electric schematics
Timeline
Field Service Technician
Pierce Pacific MFG.
12.2020 - Current
Field Service Technician
JEWELL ATTACHMENTS/STANLEY BLACK & DECKER
05.2018 - 12.2020
Millwright
HAMPTON LUMBER MILL
11.2016 - 04.2018
Field Service Representative
COLUMBIA INDUSTRIES
12.2011 - 10.2016
High School Diploma -
FOREST GROVE HIGH SCHOOL
Similar Profiles
Adam SmithAdam Smith
Lane 1A Electrician/Tester at Pierce MFGLane 1A Electrician/Tester at Pierce MFG
Charles SpencerCharles Spencer
Group Leader/Electrical Technician/Electrician at Pierce MFGGroup Leader/Electrical Technician/Electrician at Pierce MFG
Richard LoughrinRichard Loughrin
Aerial Electrician at Pierce MfgAerial Electrician at Pierce Mfg