Michael Simpkins

• Conducted routine inspections of plumbing systems to ensure they are properly functioning.
• Installed backflow preventers in accordance with state regulations.
• Diagnosed problems with plumbing systems by listening for leaks; inspecting exposed pipes; testing pressure gauges; running diagnostic tests.
• Performed maintenance on plumbing fixtures such as sinks, toilets, bathtubs and showers, disposals, dishwashers.
• Inspected drainage and sewer lines to detect blockages or leaks using video cameras.
• Assembled valves and hangers for new installations and repaired existing ones.
• Read blueprints to determine layout of plumbing systems; identify required materials; measure distances between cutting points; calculate angles for connections.
• Replaced broken drain lines using appropriate materials such as copper tubing or PVC piping.
• Tested pipe systems for proper functioning after installation or repair.
• Connected pipes to gas meters, regulators, and appliances such as stoves and water heaters according to local codes.
• Repaired or replaced worn parts such as washers, gaskets, and seals in plumbing system components.
• Installed and maintained water supply systems, including pumps, valves, piping, tanks, fixtures, and other related equipment.
• Located and repaired leaks in water supply lines.
• Followed relevant codes, regulations, and safety techniques.
• Tested plumbing systems to locate leaks, malfunctions and repair needs.
• Inspected installations to repair leaks and make adjustments to pipes.
• Shut off steam or other gases or liquids from pipes to conduct maintenance.

• Replaced worn or damaged plumbing fixtures such as sinks, toilets, tubs, showers, and garbage disposals.
• Repaired broken or blocked sewer lines with the use of video cameras.
• Sealed joints between sections of pipes using lead wool or threading compounds.
• Tested pipe systems for leaks using air and water pressure gauges.
• Ran tests on newly installed systems to ensure proper functionality before finalizing projects.
• Installed pumps and backflow prevention devices according to local codes.
• Assisted apprentices with learning basic skills such as soldering pipes or installing valves.
• Installed and repaired water supply lines, waste disposal systems, and related appliances.
• Followed safety protocols while working in hazardous environments such as septic tanks or gas lines.
• Read blueprints accurately to determine dimensions of piping required for installation projects.
• Soldered copper pipe joints to connect water supply lines for new installations.
• Provided emergency services when needed including repairing burst pipes during inclement weather conditions.
• Located and repaired leaks in water supply lines.
• Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
• Tested plumbing systems to locate leaks, malfunctions and repair needs.
• Cut and beveled piping using cutting torches, saws and threading machines.
• Maintained tools and equipment to keep supplies in excellent working condition.
• Followed relevant codes, regulations, and safety techniques.
• Cut and fit pipes to established measurements.
• Assembled and installed metal and nonmetal valves, pipe fittings and pipes.
• Completed walk-throughs of completed systems to verify code adherence.
• Performed pipe fabrication, installation and fitting according to proper specifications.
• Verified and gathered measurements to determine proper piping sizes.
• Using blueprints, laid out scale drawings of pipe systems and supports.
• Cut or threaded pipes to blueprint or drawing specifications.
• Installed supports from ceiling joists to secure pipes in place.
• Shut off steam or other gases or liquids from pipes to conduct maintenance.
• Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
• Collaborate with other tradespeople such as electricians or plumbers when necessary.
• Install supports for pipes to keep them in place during installation process.
• Repair or replace worn parts such as seals and bearings on pumps and valves.
• Assemble and secure pipes by welding joints or using cement or solder.
• Perform routine maintenance on equipment such as checking fluid levels or replacing gaskets when necessary.
• Inspect work areas to ensure that they are clean and free from obstructions.
• Locate blockages in lines using video cameras or other diagnostic equipment.
• Assembled and disassembled boilers, tanks, vats, pressure vessels, exchangers and heaters according to blueprint specifications.
• Threaded and installed pipe using pipe wrench and dies.
• Fabricated and positioned screw pipe, socket weld pipe, and stainless steel tubing.
• Used valve keys and wrenches to turn valves and shut off water from pipe sections.
• Installed piping systems for plumbing for both domestic and HVAC lines.

• Ensured compliance with local, state, and federal regulations.
• Maintained relationships with existing clients by providing superior customer service.
• Negotiated with vendors to gain optimal pricing on products resulting in substantial increase in profit margin. One man operation in the residential plumbing field. Roughed in new residences and installed fixtures when ready. Replaced water heaters and faucets as needed. Installed water and sewer mains from the street to connection inside home. Took out permits from local municipality's to perform the work. Installed and designed irrigation system for residences.

Maintained and service on Fire suppression system on a 37 story highrise. Did maintenance on wet fire sprinkler heads, Dry pipe deluge valves, halon suppression valves. Did monthly inspection of tamper alarms working with fire command.

• Installed pumps and backflow prevention devices according to local codes.
• Tested pipe systems for leaks using air and water pressure gauges.
• Inspected drainage and other plumbing systems to identify necessary repairs.
• Maintained records of work performed on each job site including material used and time spent on the job.
• Sealed joints between sections of pipes using lead wool or threading compounds.
• Replaced worn or damaged plumbing fixtures such as sinks, toilets, tubs, showers, and garbage disposals.
• Soldered copper pipe joints to connect water supply lines for new installations.
• Performed routine maintenance tasks such as flushing out drainpipes or cleaning out grease traps.
• Repaired broken or blocked sewer lines with the use of video cameras.
• Provided emergency services when needed including repairing burst pipes during inclement weather conditions.
• Located and repaired leaks in water supply lines.
• Tested plumbing systems to locate leaks, malfunctions and repair needs.
• Performed pipe fabrication, installation and fitting according to proper specifications.
• Installed and extended underground storm, sanitation, and water piping systems to connect fixtures and plumbing.
• Identified and located required tools prior to starting each project.
• Inspected installed systems using hydrostatic testing or pressure gauges.
• Shut off steam or other gases or liquids from pipes to conduct maintenance.