MIGUEL ROSAS

• Turnaround with holly frontier refinery in anacortes wa on the flair TA.and also work at the BP cherry point turnaround for Reformer#3 and calciner 2024 turnaround.
• Installed valves, hangers, supports and flanges inside piping systems. Assembled and installed a variety of valves and fittings. Interpreted blueprints to determine locations, quantities and sizes of materials required. Read blueprints to determine appropriate materials and procedures for each project.
• Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
• Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
• Filled pipe systems with water and air to determine location of leaks.
• Expedited project completion with effective use of power tools such as grinders, drills, saws, and torches for various tasks.
• Fabricated piping pieces and components in line with design specifications for each system.
• Inspected and tested existing pipe systems to identify system defects and malfunctions.
• Delivered exceptional customer service when interacting with clients during on-site visits or consultations.
• Replaced faulty parts and repaired structural damages to pipes and related components.
• Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
• Inspected sewers and piping systems to assess quality and condition.
• Ensured safe work environments by strictly adhering to industry safety standards and procedures.
• Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
• Established strong working relationships with colleagues across trades for better collaboration during multi-disciplinary projects.
• Threaded pipes using piping machines.
• Completed complex projects on time through efficient time management and prioritization of tasks.
• Enhanced system reliability by performing hydrostatic testing before final installation or repairs.
• Demonstrated flexibility by adeptly handling various pipe materials, including steel, copper, PVC, and cast iron in different environments.
• Interpreted blueprints to determine locations, quantities, and sizes of materials required.
• Identified equipment and production non-compliance issues and notified foreman to facilitate resolution.
• Improved project efficiency by skillfully reading and interpreting blueprints, plans, and specifications.
• Cut and drilled holes in walls to permit passage of pipes.
• Fabricated, assembled, installed and maintained piping systems.
• Increased client satisfaction by maintaining clear communication regarding project progress and addressing concerns promptly.
• Planned pipe system layout, installation and repair according to specifications.
• Measured, threaded, and cut materials to correct angles.
• Assisted with repairs to steam, drainage, and sewer lines.
• Prevented potential delays in construction schedules by proactively identifying potential hazards or obstacles in the workspace.
• Eliminated risks by correctly identifying potential safety hazards.
• Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
• Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
• Connected piping systems to water heaters, boilers, pumps and auxillary equipment to complete installations.
• Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
• Reduced material waste by accurately measuring, cutting, and assembling piping systems.
• Followed safe work practices, which included fall protection and personal protective equipment.
• Proven ability to develop and implement creative solutions to complex problems.
• Worked well in a team setting, providing support and guidance.
• Paid attention to detail while completing assignments.
• Strengthened communication skills through regular interactions with others.
• Resolved problems, improved operations and provided exceptional service.
• Adaptable and proficient in learning new concepts quickly and efficiently.
• Applied effective time management techniques to meet tight deadlines.
• Gained strong leadership skills by managing projects from start to finish.
• Acted as a team leader in group projects, delegating tasks and providing feedback.
• Developed and maintained courteous and effective working relationships.
• Worked effectively in fast-paced environments.
• Passionate about learning and committed to continual improvement.
• Organized and detail-oriented with a strong work ethic.
• Demonstrated respect, friendliness and willingness to help wherever needed.

• Help with the installation vacuum chaimber at norhrop grumman in gilbert az.
• Cuts pipe using saws, pipe cutters, cutting torch and pipe cutting machines.
• Bends pipe using pipe bending tools and machinery.
• Assembles and installs a variety of metal and non-metal pips, tubes and fittings.
• Secures pipes to structures with bracket clamps, and hangers using hand tools and power tools.
• Fabricated piping pieces and components in line with design specifications for each system.
• Inspected and tested existing pipe systems to identify system defects and malfunctions.

Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.

• Established strong working relationships with colleagues across trades for better collaboration during multi-disciplinary projects.
• Interpreted blueprints to determine locations, quantities, and sizes of materials required.
• Cut and drilled holes in walls to permit passage of pipes.
• Fabricated, assembled, installed and maintained piping systems.
• Demonstrated versatility with expertise in welding processes, including MIG, TIG, and stick welding for various applications.
• Used clamps and brackets to attach pipes to walls, structures and fixtures.
• Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
• Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
• Paid attention to detail while completing assignments.
• Adaptable and proficient in learning new concepts quickly and efficiently.
• Acted as a team leader in group projects, delegating tasks and providing feedback.
• Developed and maintained courteous and effective working relationships.
• Demonstrated respect, friendliness and willingness to help wherever needed.

• New Construction at RARE EARTH MINE in mountain pass california
• Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
• Filled pipe systems with water and air to determine location of leaks.
• Expedited project completion with effective use of power tools such as grinders, drills, saws, and torches for various tasks.
• Fabricated piping pieces and components in line with design specifications for each system.
• Inspected and tested existing pipe systems to identify system defects and malfunctions.
• Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
• Ensured safe work environments by strictly adhering to industry safety standards and procedures.
• Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
• Established strong working relationships with colleagues across trades for better collaboration during multi-disciplinary projects.
• Threaded pipes using piping machines.
• Enhanced system reliability by performing hydrostatic testing before final installation or repairs.
• Demonstrated flexibility by adeptly handling various pipe materials, including steel, copper, PVC, and cast iron in different environments.
• Interpreted blueprints to determine locations, quantities, and sizes of materials required.
• Identified equipment and production non-compliance issues and notified foreman to facilitate resolution.
• Improved project efficiency by skillfully reading and interpreting blueprints, plans, and specifications.
• Cut and drilled holes in walls to permit passage of pipes.
• Planned pipe system layout, installation and repair according to specifications.
• Measured, threaded, and cut materials to correct angles.
• Used clamps and brackets to attach pipes to walls, structures and fixtures.
• Paid attention to detail while completing assignments.
• Strengthened communication skills through regular interactions with others.
• Applied effective time management techniques to meet tight deadlines.
• Acted as a team leader in group projects, delegating tasks and providing feedback.
• Developed and maintained courteous and effective working relationships.
• Passionate about learning and committed to continual improvement.
• Demonstrated respect, friendliness and willingness to help wherever needed.
• Clean, Prep, Cut, Bevel, Grind, Fit pipe that will be welded by qualified welders.
• Hang pipe in pipe racks. Install pipe, flanges, valves and hangers.
• Eliminated risks by correctly identifying potential safety hazards.
• Assembled and installed a variety of valves and fittings.
• Managed job site hazards by accurately locating bio-hazards, low-grade radiation and chemicals.
• Read blueprints to determine appropriate materials and procedures for each project.

• NEW Contruction at CALPLANT in willows california
• Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
• Expedited project completion with effective use of power tools such as grinders, drills, saws, and torches for various tasks.
• Fabricated piping pieces and components in line with design specifications for each system.
• Inspected and tested existing pipe systems to identify system defects and malfunctions.
• Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
• Ensured safe work environments by strictly adhering to industry safety standards and procedures.
• Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
• Established strong working relationships with colleagues across trades for better collaboration during multi-disciplinary projects.
• Threaded pipes using piping machines.
• Completed complex projects on time through efficient time management and prioritization of tasks.
• Interpreted blueprints to determine locations, quantities, and sizes of materials required.
• Improved project efficiency by skillfully reading and interpreting blueprints, plans, and specifications.
• Cut and drilled holes in walls to permit passage of pipes.
• Measured, threaded, and cut materials to correct angles.
• Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
• Monitored pipeline pressure and flow rates to facilitate safe and efficient operation.
• Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
• Reviewed blueprints and project specifications to determine correct plumbing solutions.
• Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
• Followed safe work practices, which included fall protection and personal protective equipment.
• Proven ability to develop and implement creative solutions to complex problems.
• Paid attention to detail while completing assignments.
• Strengthened communication skills through regular interactions with others.
• Identified issues, analyzed information and provided solutions to problems.
• Acted as a team leader in group projects, delegating tasks and providing feedback.
• Worked effectively in fast-paced environments.
• Passionate about learning and committed to continual improvement.
• Eliminated risks by correctly identifying potential safety hazards.
• Assemble, Dismantle, Maintain, Clean, Repair, Remove and Install vessels, heat exchangers, manholes, valves, gauges, towers, boilers and fin fans in chemical plants.
• The use of hand tools such as hammers, pipe wrenches, channel locks, combo wrenches, and pry bars. Use of power tools such as saw zalls, porta a bands, grinders and threading machines.
• Also use come-alongs and chainfalls. Follow all safety guidelines according to OSHA and Hazmat regulations.

• Maintenance, Repair and replacement of mechanical non-rotating fixed equipment including rigging, dismantling, and fitting of pipework, exchangers, vessels, etc. fabrication and installation of piping and support structure. Journeyman Boilermaker.
• Maintenance, Repair, Clean and Replace Valves, Exchangers, Towers and their parts.
• Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
• Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
• Installed new systems and connected piping to existing components by welding, bolting and threading.
• Enhanced system reliability by performing hydrostatic testing before final installation or repairs.
• Tested and operated hydraulic and pneumatic equipment for heating and cooling systems.
• Streamlined workflow processes by maintaining a clean and organized workspace at all times.
• Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
• Assisted with repairs to steam, drainage, and sewer lines.
• Followed safe work practices, which included fall protection and personal protective equipment.
• Fabricated piping pieces and components in line with design specifications for each system.
• Eliminated risks by correctly identifying potential safety hazards.
• Established strong working relationships with colleagues across trades for better collaboration during multi-disciplinary projects.
• Connected piping systems to water heaters, boilers, pumps and auxillary equipment to complete installations.
• Measured, threaded, and cut materials to correct angles.
• Improved project efficiency by skillfully reading and interpreting blueprints, plans, and specifications.
• Inspected sewers and piping systems to assess quality and condition.
• Enhanced team productivity by providing guidance and training to apprentice pipefitters.
• Threaded pipes using piping machines.
• Filled pipe systems with water and air to determine location of leaks.
• Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
• Coordinated movement of materials and equipment to job sites.
• Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
• Interpreted blueprints to determine locations, quantities, and sizes of materials required.
• Demonstrated versatility with expertise in welding processes, including MIG, TIG, and stick welding for various applications.
• Reduced material waste by accurately measuring, cutting, and assembling piping systems.
• Completed complex projects on time through efficient time management and prioritization of tasks.
• Used clamps and brackets to attach pipes to walls, structures and fixtures.
• Identified equipment and production non-compliance issues and notified foreman to facilitate resolution.
• Fabricated, assembled, installed and maintained piping systems.
• Cut and drilled holes in walls to permit passage of pipes.
• Replaced faulty parts and repaired structural damages to pipes and related components.
• Inspected and tested existing pipe systems to identify system defects and malfunctions.
• Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
• Planned pipe system layout, installation and repair according to specifications.
• Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
• Secured rising mains and boiler piping to structural supports in new construction and remodeling projects.
• Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
• Developed strong communication and organizational skills through working on group projects.
• Paid attention to detail while completing assignments.
• Applied effective time management techniques to meet tight deadlines.
• Proven ability to learn quickly and adapt to new situations.
• Demonstrated creativity and resourcefulness through the development of innovative solutions.
• Organized and detail-oriented with a strong work ethic.
• Demonstrated respect, friendliness and willingness to help wherever needed.
• Learned and adapted quickly to new technology and software applications.
• Self-motivated, with a strong sense of personal responsibility.
• Identified issues, analyzed information and provided solutions to problems.
• Worked effectively in fast-paced environments.
• Used critical thinking to break down problems, evaluate solutions and make decisions.
• Worked well in a team setting, providing support and guidance.
• Skilled at working independently and collaboratively in a team environment.
• Cultivated interpersonal skills by building positive relationships with others.
• Resolved problems, improved operations and provided exceptional service.
• Studied designs, blueprints and drawings to create templates of boilers.
• Removed boiler casings, grades, handrails, manhole, and hole covers to facilitate access to boilers or other vessels for repair.
• Tightened or replaced bolts and gaskets to repair leaks.
• Used hand signals to notify crane operator to lift components to specific positions.
• Assembled and installed boilers, tanks and vats according to blueprints and specifications.
• Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.
• Maintained compliance with all safety procedures from both client and employer.
• Utilized specialized tools and machinery to complete repairs and installation.
• Interpreted blueprints, sketches, and specifications for each job.
• Enhanced boiler efficiency by performing regular maintenance and repairs on equipment.
• Upheld company reputation for excellence by consistently delivering high-quality workmanship that met or exceeded client expectations.
• Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.
• Served as a reliable mentor to new hires, providing guidance and support during their onboarding process.
• Inspected equipment and structures to determine scope of work (SOW).
• Identified issues and addressed each immediately with job foreman.
• Visited work sites to upgrade components, boiler tubes and ductwork.
• Used power hammers or weld pressure vessel tubes to achieve leakproof joints.
• Dismantled equipment or devices to gain access and remove defective parts or components.
• Built and repaired process tanks, storage tanks and water treatment tanks.
• Demonstrated versatility in working with various types of boilers, including fire-tube, water-tube, cast iron, condensing, and biomass models.
• Inspected equipment, structures and materials to identify cause of errors.
• Operated forklifts, bobcats and track hoes.
• Developed and maintained courteous and effective working relationships.
• Strengthened communication skills through regular interactions with others.

• TURNAROUND AT SIERRITA COOPER MINE.
• Used hand signals to notify crane operator to lift components to specific positions.
• Dismantled equipment or devices to gain access and remove defective parts or components.
• Visited work sites to upgrade components, boiler tubes and ductwork.
• Streamlined repair processes with effective communication between team members, resulting in faster project completion times.
• Cleaned and maintained boilers and associated equipment to increase efficiency and performance level.
• Demonstrated flexibility when adapting to changing project demands and priorities while maintaining quality craftsmanship.
• Marked reference points for columns or plates on foundations using master straightedge.
• Tightened or replaced bolts and gaskets to repair leaks.
• Interpreted blueprints, sketches, and specifications for each job.
• Achieved higher levels of accuracy in fabrication tasks by utilizing precise measurement tools and techniques.
• Built and repaired process tanks, storage tanks and water treatment tanks.
• Expedited project timelines by coordinating material deliveries and staging work areas for optimal workflow efficiency.
• Utilized specialized tools such as oxy-acetylene torches, plasma cutters, and arc welders to perform intricate repairs effectively.
• Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.
• Improved workplace safety culture through participation in safety meetings, hazard assessments, and incident reporting procedures.
• Used power hammers or weld pressure vessel tubes to achieve leakproof joints.
• Operated forklifts, bobcats and track hoes.
• Studied designs, blueprints and drawings to create templates of boilers.
• Prevented boiler malfunctions through thorough inspection of valves, gaskets, and pressure gauges.
• Removed boiler casings, grades, handrails, manhole, and hole covers to facilitate access to boilers or other vessels for repair.
• Ensured safe working conditions by adhering to industry safety regulations and guidelines.
• Identified issues and addressed each immediately with job foreman.
• Participated in team projects, demonstrating an ability to work collaboratively and effectively.
• Worked effectively in fast-paced environments.
• Adaptable and proficient in learning new concepts quickly and efficiently.
• Proven ability to learn quickly and adapt to new situations.
• Developed strong communication and organizational skills through working on group projects.
• Demonstrated respect, friendliness and willingness to help wherever needed.
• Managed time efficiently in order to complete all tasks within deadlines.
• Worked flexible hours across night, weekend, and holiday shifts.
• Organized and detail-oriented with a strong work ethic.
• Filled pipe systems with water and air to determine location of leaks.
• Installed new systems and connected piping to existing components by welding, bolting and threading.
• Supported fellow team members in their tasks, fostering a collaborative work environment that prioritized both safety and efficiency.
• Contributed to overall company success by maintaining a strong work ethic, adaptability, and commitment to delivering exceptional service on all projects undertaken.
• Followed safe work practices, which included fall protection and personal protective equipment.
• Cut and drilled holes in walls to permit passage of pipes.
• Planned pipe system layout, installation and repair according to specifications.
• Maintained high-quality standards through consistent attention to detail while fitting pipes according to building code requirements.
• Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
• Facilitated smooth project execution by interpreting isometric drawings for accurate installation or modification of piping systems.
• Assisted with repairs to steam, drainage, and sewer lines.
• Used clamps and brackets to attach pipes to walls, structures and fixtures.
• Interpreted blueprints to determine locations, quantities, and sizes of materials required.
• Optimized material usage by accurately measuring and calculating required materials for each project, minimizing waste.
• Tested and operated hydraulic and pneumatic equipment for heating and cooling systems.
• Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
• Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
• Demonstrated versatility in skillset by working with various types of pipes such as PVC, copper, steel, cast iron among others.
• Reviewed blueprints and project specifications to determine correct plumbing solutions.
• Contributed to successful project outcomes by working closely with plumbers, steamfitters, and welders on diverse job sites.
• Eliminated risks by correctly identifying potential safety hazards.
• Supported team efficiency through clear communication regarding progress updates and potential issues during the course of projects.
• Secured rising mains and boiler piping to structural supports in new construction and remodeling projects.
• Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
• Fabricated piping pieces and components in line with design specifications for each system.
• Promoted a safe work environment by adhering to company safety policies and procedures at all times during pipefitting operations.
• Measured, threaded, and cut materials to correct angles.
• Increased efficiency by collaborating with team members to install, assemble and repair piping systems in various construction projects.
• Improved workflow with efficient pipe system modifications, including cutting, threading, welding, and soldering components as needed.
• Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
• Paid attention to detail while completing assignments.
• Passionate about learning and committed to continual improvement.
• Assembled component layout by applying knowledge of geometry, physical metal properties and weld shrinkage.
• Select type and size of pipe and related materials according to job specifications.
• Preps material for welding by cutting or grinding using porta-band, pipe cutters, hammer and chisel, cutting torch, and grinders. Thread pipe using threading machine.
• Secure pipes to structure with bolt up, clamps, brackets, tack welding and hangars using hand tools and machines.