Hi, I’m
Miguel A Rivera Colon
3395 Landmark Ct, Chambersburg, PA 17201,PA
Summary
Seasoned General Foreman offering 24 years of progressive experience in electricial industry. Strong analytical and communication skills with in-depth understanding of documentation, safety and inventory needs. Focused on working with accuracy and efficiency to control costs and satisfy project requirements.
Overview
9
years of professional experience
Work History
Wanzek Construction Inc
General Foreman/Superintendent
02.2022 - 09.2024
Job overview
- Resolved conflicts and negotiated agreements between parties in order to reach win-win solutions to disagreements and clarify misunderstandings.
- Negotiated agreements between employees to clarify misunderstood directions and resolve conflicts affecting performance.
- Developed exceptional attendance record with special attention to punctuality and preparation to work upon arrival.
- Worked with project manager to resolve problems,to improve operations and provide exceptional customer service.
Amteck Construction Inc
Electrical General Foreman
06.2019 - 12.2021
Job overview
- Maintained safety onsite and upheld all OSHA regulations by giving employees proper personal protective equipment and by giving them the proper information they needed.
- Reviewed plans and inspected ongoing construction to keep work in line with project goals.
- Stepped up during foreman's absence to answer questions from the client and delegate project tasks to employees.
- Created professional development plan to cultivate and advance skillsets of all employees.
- Built sustainable procedures, defect plans and risk assessment systems with engineers and consultants.
- Proposed plans involving construction manager for achieving objectives in operations and education.
- Managed complete construction process to maximize quality, cost-controls and efficiency.
Yates Construction Company Inc.
E and I Tech
11.2018 - 05.2019
Job overview
- Devoted special emphasis to punctuality and worked to maintain outstanding attendance record, consistently arriving to work ready to start immediately.
- Negotiated agreements between employees to clarify misunderstood directions and resolve conflicts affecting performance.put in new switch gear ran conduit pulled in cable termed cable ran tubing installed insterments and hooked them up
Overland Contracting Inc.
Electrical Foreman
08.2018 - 10.2018
Job overview
- Facilitated work site safety by applying knowledge of safety protocol and awareness of potential hazards.
- Resolved team and client challenges with proactive and actionable solutions.
- Communicated with clients to assess needs, provide status reports ad inform of any potential delays.
- Developed training methods for new electricians to align with company policies.
- Oversaw work of electrical and telecommunication personnel for key clients.
- Evaluated job scope and determined necessary supplies, timelines and projected expenses.
- Monitored employee performance and adherence to job specifications to maintain quality standards and high client satisfaction.
- Supervised crew of electricians and maintained safe, efficient and structured work environment.
- Provided technical guidance to employees on safe operation of equipment and tools.
- Prioritized and distributed work assignments, selecting employees by strength in skills required for each task.
- Monitored employees to enforce safety and work performance standards.
- Evaluated job site and project specifications to determine supply needs, coordinating availability of equipment and materials.
- Executed project duties to ensure on-time and quality work.
Fluor Corp.
Electrical Foreman
01.2018 - 08.2018
Job overview
- Monitored manufacture of electrical devices and operations to ensure compliance with safety protocols.
- Mentored junior engineers and new hires to better improve competency and efficiency of all staff.
- Organized ongoing maintenance schedules to boost system performance.
- Enhanced customer satisfaction ratings by motivating team members to strengthen quality and increase productivity.
- Monitored safety compliance to maintain strict standards and protect team members from harm.
- Evaluated final results to determine quality levels and isolate root causes of any identified faults.
- Optimized supply levels to keep stock within ideal parameters for expected needs.
- Supervised daily operations, including employee performance, preventive maintenance and safety.
- Procured information from various vendors to ensure cost-effective purchasing.
- Created work schedules and set up training for 10 employees working on [Typetemp power] equipment.
Overland Contracting Inc.
Electrician
08.2017 - 01.2018
Job overview
- Updated service record files on equipment drawings and history.
- Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
- Consulted with supervisor electrician regarding likely risks associated with assigned job.
- Applied knowledge of trade tools and ability to read and follow blueprints and wiring plans to projects.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters to complete fast-paced work.
- Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
- Effectively worked with multi-craft team; providing wiring installation, preventive maintenance and testing of equipment.
- Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code.
- Tested electrical systems and continuity of circuits in electrical wiring, equipment and fixtures using various testing devices.
- Consistently updated knowledge of safety requirements and policies.
- Performed electrical system installation of conduit, wire, power distribution and motor controls.
- Measured devices, including analyzers, amp meters and volt-ohm meters.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
- Installed and wired electrical hardware, including transformers, junction boxes, service panels, electrical boxes, switches and circuit breakers.
- Maintained clean, safe and stocked work area with appropriate equipment and supplies.
- Worked extended hours on weekday and weekend projects.
- Properly stored and maintained power tools and equipment for each job.
- Inspected completed work of apprentices and explained needed corrections.
- Complied with safety standards and codes per National Electrical Code.
- Developed in-depth knowledge of arc flash ratings and standards.
- Worked collaboratively with clients, team members, implementation consultants and resources across company to achieve desired results.
- Maintained safety of electrical work and systems using test meters.
- Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
- Analyzed blueprints to diagnose potential electrical hazards and carried out risk assessments prior to starting new job.
- Fabricated specific electrical component parts and assemblies.
- Worked with various types of cableways, conduits and other electrical raceways.
Fluor Corp.
Electrical Foreman
02.2016 - 08.2017
Job overview
- Oversaw work of electrical and telecommunication personnel for key clients.
- Resolved team and client challenges with proactive and actionable solutions.
- Facilitated work site safety by applying knowledge of safety protocol and awareness of potential hazards.
- Monitored employee performance and adherence to job specifications to maintain quality standards and high client satisfaction.
- Developed training methods for new electricians to align with company policies.
- Communicated with clients to assess needs, provide status reports ad inform of any potential delays.
- Oversaw control room modification work conducted by electricians, ensuring compliance with safety guidelines, scope of work and reporting requirements.
- Supervised crew of electricians and maintained safe, efficient and structured work environment.
- Evaluated job scope and determined necessary supplies, timelines and projected expenses.
- Monitored employees to enforce safety and work performance standards.
- Prioritized and distributed work assignments, selecting employees by strength in skills required for each task.
- Provided technical guidance to employees on safe operation of equipment and tools.
- Executed project duties to ensure on-time and quality work.
- Maintained detailed records of work activities and notable events.
- Evaluated job site and project specifications to determine supply needs, coordinating availability of equipment and materials.
- Trained and mentored subordinates on complex procedures and industry best practices.
Education
OSHA
30 Hours Construction Safety
Edutec Technical CollegeCoamo Puerto Rico
Electrician
06.2005
University Ana G Mendez Santa Isabel Puerto Rico
Associate Degree In Computer Programming
08.2003
Jose Felipe ZallasCoamo Puerto Rico
High School Diploma
05.2000
Skills
- Scheduling
- Budgeting
- Create Solutions to Problems
- Contract Management
- Verbal and written communication
- Project milestones
- Recordkeeping requirements
- Construction safety
- Attendance monitoring
- Daily planning
- Planning projects
- Safety compliance
- Team leadership skills
- Company safety policies
- Crew leadership
- Safety enforcement
- Productivity logs
- Preventative maintenance
- Safety protocols
- Training and mentoring
- Technical documentation understanding
- Job reporting and documentation
- Manpower recruiting
- Training and development
- Blueprint analysis
- Quality controls
- Blueprint reading
- Safety practices
- Team leadership
- Team training and support
- Project scheduling
- Installation and repair
Timeline
General Foreman/Superintendent
Wanzek Construction Inc
02.2022 - 09.2024
Electrical General Foreman
Amteck Construction Inc
06.2019 - 12.2021
E and I Tech
Yates Construction Company Inc.
11.2018 - 05.2019
Electrical Foreman
Overland Contracting Inc.
08.2018 - 10.2018
Electrical Foreman
Fluor Corp.
01.2018 - 08.2018
Electrician
Overland Contracting Inc.
08.2017 - 01.2018
Electrical Foreman
Fluor Corp.
02.2016 - 08.2017
OSHA
30 Hours Construction Safety
Edutec Technical College
Electrician
University Ana G Mendez
Associate Degree In Computer Programming
Jose Felipe Zallas
High School Diploma
Similar Profiles
Norlefils JeanNorlefils Jean
Warehouse supervisor at Wanzek Construction IncWarehouse supervisor at Wanzek Construction Inc
Norlefils JeanNorlefils Jean
Warehouse supervisor at Wanzek Construction IncWarehouse supervisor at Wanzek Construction Inc
Brandon KubicekBrandon Kubicek
Assistant Project Manager at Wanzek ConstructionAssistant Project Manager at Wanzek Construction
Hailey VarnerHailey Varner
Licensed Practical Nurse at SCI Camp HillLicensed Practical Nurse at SCI Camp Hill
Lori LampertLori Lampert
Media Consultant at ValpakClippMedia Consultant at ValpakClipp