Morgan Cabello

• Streamlined project timelines with effective coordination and communication between team members, contractors, and management.
• Increased safety measures by implementing risk assessments and developing emergency response plans for the industrial site.
• Expedited troubleshooting processes through advanced diagnostic techniques for identifying root causes of electrical issues and developing effective solutions.
• Prepared sketches and blueprints.
• Organized ongoing maintenance schedules to boost system performance.
• Monitored equipment, tools and system upgrades to compile data into detailed reports for upper management.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
• Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
• Performed routine and complex maintenance and repairs on various electrical equipment.
• Inspected electrical equipment to assure it was operating correctly.
• Responded to fault and wiring issues, identifying hazards and problems.
• Installed new equipment and modified existing equipment.
• Collaborated closely with other maintenance professionals to coordinate repairs efficiently without disrupting daily operations.
• Reviewed blueprints and schematics to properly place wires, fixtures and appliances.
• Safely installed new electrical components, fixtures and motors in addition to testing systems to enhance power flow.
• Kept up-to-date with advancements in industry technology and practices by attending workshops and conferences, subsequently implementing new techniques as appropriate.
• Maintained a strong commitment to safety protocols while working with high-voltage systems; significantly reduced risk of accidents or injuries.
• Cable tray, conduit, terminations, low voltage, high voltage, grounding.
• Terminated wiring and connected circuits with correct techniques.
• Pulled EMT and PVC conduit wire according to plans and code requirements.
• Installed new electrical components and fixtures safely and tested systems to enhance power flow.

• Contributed to a positive organizational culture by fostering teamwork among crew members while holding everyone accountable for their performance at all times.
• Collaborated with engineers to design innovative electrical systems that met or exceeded client specifications and requirements.
• Developed strong relationships with clients through proactive communication about project progress and addressing concerns as they arose.

Ensured adherence to quality standards through regular inspections, audits, and reporting of industrial electrical systems.

• Maintained a clean working environment with proper organization of tools, materials, and equipment necessary for efficient workflow processes within the job site daily routines.
• Scheduled and oversaw maintenance, repair and installation activities.
• Created and maintained daily and weekly reports for upper management.
• Utilized proper tools and materials to adhere to safety guidelines.
• Monitored daily progress and work quality to provide guidance and direction to mechanics and installers.
• Supervised team of installers and mechanics to complete work on time and to company standards.
• Monitored safety compliance to maintain strict standards and protect team members from harm.
• Worked on pre turnaround, turnaround and post turnaround
• Disconnect and reconnect instruments, valves, elements ect for maintenance and replace
• Worked on heat trace

• Collaborated with engineers and other technicians for the successful completion of various industrial projects.
• Installed, maintained and repaired electrical wiring, controls and lighting systems.
• Connected wires to circuit breakers, transformers, and other components.
• Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
• Performed thorough testing on newly-installed electrical systems to confirm proper function before integrating into daily operations.
• Repaired and replaced equipment, electrical wiring and fixtures.
• Tested circuit continuity to determine electrical compatibility and component safety.
• Inspected transformers and circuit breakers for malfunctions.
• Observed functioning of installed equipment or system to detect hazards and need for adjustments, relocation or replacement.
• Coordinated with vendors for procurement of high-quality electrical components, ensuring reliability and longevity of installations.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment.
• Spliced, joined and connected wire to fixtures and other electrical components.
• Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
• Improved system efficiency by performing routine maintenance on electrical equipment and wiring.
• Assisted clients in understanding complex electrical concepts, enabling informed decision-making throughout the project lifecycle.
• Developed customized testing plans based on specific client needs or unique project requirements.
• Modified, maintained, or repaired electronics equipment or systems to achieve proper functioning.
• Maintained accurate documentation of completed work, including detailed notes on repairs, inspections, and recommendations for future improvements.
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
• Studied building schematics to determine location of wiring and equipment.

• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Worked with various types of cableways, conduits and other electrical raceways.
• Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Analyzed blueprints to determine where to run wires, install electrical outlets and connect wires to central circuit panels.
• Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
• Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
• Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.

• Conducted preventive maintenance and troubleshooting of metering instruments.
• Performed scheduled and planned installation and maintenance duties.
• Performed repair procedures on damaged instruments and sourced replacements from approved vendors.
• Modified, maintained or repaired electronics equipment or systems to achieve proper functioning.
• Responded to problems with processing and production equipment and completed timely
• Reviewed existing electrical engineering criteria to identify necessary revisions, deletions or amendments to outdated material.
• Fixed wiring and circuit systems to correct performance issues and safety concerns.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Performed electrical system installation of conduit, wire, power distribution and motor controls.

• Tested circuit continuity to determine electrical compatibility and component safety.
• Executed electrical wiring plans for Type, Type and other electrical systems.
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
• Spliced, joined and connected wire to fixtures and other electrical components.
• Installed, maintained and repaired electrical wiring, controls and lighting systems.
• Quickly learned new skills and applied them to daily tasks, improving efficiency and productivity.
• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Worked with various types of cableways, conduits and other electrical raceways.
• Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Installed, maintained, repaired and tested equipment for electricity generation and utilization.

• Completed rough-in, termination and underground work.
• Repaired and installed new fixtures, wiring, circuits and motors.
• Evaluated existing electrical systems for maintenance, repair and update requirements.
• Interpreted electrical codes and diagrams to complete electrical repair and installation tasks.
• High voltage and low voltage terminations
• Pull wire

• Completed rough-in, termination and underground work.
• Repaired and installed new fixtures, wiring, circuits and motors.
• Operated tools according to prescribed safety practices.
• Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
• Troubleshooted systems and repaired equipment, ensuring compliance with all established guidelines.
• Verified problems, investigated faults and troubleshot solutions to enhance installations.
• Trained junior electrical professionals on proper procedures.
• Strees cone high voltage
• Install conduit and cable tray

• Repaired and installed new fixtures, wiring, circuits and motors.
• Operated tools according to prescribed safety practices.
• Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
• Troubleshooted systems and repaired equipment, ensuring compliance with all established guidelines.
• Read and understood technical drawings, diagrams, flow charts and project documentation to make accurate decisions about electrical system installations and repairs for each assignment.
• Installation of cable tray, channel tray and conduit
• Terminations of heat trace
• Read technical drawings, diagrams and project documentation to make accurate decisions about electrical system installations and repair work.
• Interpreted blueprints, schematics, and diagrams of project requirements and initiated appropriate electrical installations.
• Repaired and installed new fixtures, wiring, circuits, and motors.
• Tested electrical systems and components for continuity, current, voltage and resistance.
• Trained junior electrical professionals on proper procedures.
• Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.

• Cultivated positive working dynamic among installation crew and electrical co-workers.
• Managed construction workflow to drive productivity.
• Displayed excellent people skills and managed, motivated and disciplined team members as necessary.
• Organized, led and trained crew members to complete projects within established guidelines and timeframes.
• Directed projects according to schedule and quality demands.
• Calculated materials and labor required to complete jobs on-schedule and prepared estimates.
• Worked flexible hours; night, weekend, and holiday shifts.
• Installed, maintained and repaired electrical wiring, controls and lighting systems.
• Followed blueprints to install wiring before completion of walls, ceilings or floors.
• Studied building schematics to determine location of wiring and equipment.

• Repaired and installed new fixtures, wiring, circuits and motors.
• Operated tools according to prescribed safety practices.
• Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
• Fabricated custom and replacement parts according to specifications, using hand tools such as Tool and Tool.
• Studied building schematics to determine location of wiring and equipment.
• Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
• Spliced, joined and connected wire to fixtures and other electrical components.
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
• Fabricated specific electrical component parts and assemblies.
• Pulled wire through conduits and through holes in walls and floors.
• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Worked with various types of cableways, conduits and other electrical raceways.
• Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.

• Cultivated positive working dynamic among installation crew and electrical co-workers.
• Managed construction workflow to drive productivity.
• Trained workers in proper methods, equipment operation and safety procedures.
• Calculated materials and labor required to complete jobs on-schedule and prepared estimates.
• Quickly learned new skills and applied them to daily tasks, improving efficiency and productivity.
• Handled installation of electrical components by splicing, joining and connecting wire.
• Repaired light fixtures, controls, switches, relays and circuit breaker panels based on detailed evaluations.
• Pulled EMT and PVC conduit wire according to plans and code requirements.
• Terminated wiring and connected circuits with correct techniques.
• Installed new electrical components and fixtures safely and tested systems to enhance power flow.
• Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.

• Completed rough-in, termination and underground work.
• Repaired and installed new fixtures, wiring, circuits and motors.
• Operated tools according to prescribed safety practices.
• Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
• Installation of conduit, cable tray
• Troubleshooted systems and repaired equipment, ensuring compliance with all established guidelines.
• Verified problems, investigated faults and troubleshot solutions to enhance installations.
• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Worked with various types of cableways, conduits and other electrical raceways.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Launched troubleshooting and tests on equipment post-installation to confirm compatibility and safety of electrical systems.
• Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
• Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.

• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Worked with various types of cableways, conduits and other electrical raceways.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Installed, maintained, repaired and tested equipment for electricity generation and utilization.
• Analyzed blueprints to diagnose potential electrical hazards and carry out risk assessments prior to starting new jobs.
• Tested equipment tools such as oscilloscopes, ammeters and test lamps.

• Completed rough-in, termination and underground work.
• Repaired and installed new fixtures, wiring, circuits and motors.
• Operated tools according to prescribed safety practices.
• Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Worked with various types of cableways, conduits and other electrical raceways.
• Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Launched troubleshooting and tests on equipment post-installation to confirm compatibility and safety of electrical systems.
• Analyzed blueprints to diagnose potential electrical hazards and carry out risk assessments prior to starting new jobs.
• Identified areas of potential state safety code violations and implemented revisions.

• Pulled wire through conduits and through holes in walls and floors.
• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.

• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Worked with various types of cableways, conduits and other electrical raceways.
• Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
• Tested equipment tools such as oscilloscopes, ammeters and test lamps.

• Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge.
• Helped complete system installations, digging trenches and breaking up concrete.
• Learned to expertly use hand and power equipment for hoisting, drilling, Type and Type.
• Tested electrical systems and continuity of circuits in electrical wiring, equipment and fixtures using various testing devices.
• Pulled wire through conduits and through holes in walls and floors.
• Moved equipment, supplies and tools to work locations to assist Job title in completing skilled work.
• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Worked with various types of cableways, conduits and other electrical raceways.