Steven Nelson
Stuart,Iowa
Summary
Dependable Technician that is proficient in conducting root cause analyses to diagnose equipment issues with using not only experience but schematics. Helpful and task oriented employee. Ready for an exciting new challenge utilizing my previous experience to succeed as a team in this new position.
Overview
12
12
years of professional experience
Work History
Lead Technician
Vestas American Wind
03.2021 - Current
- Planned, scheduled, and delegated daily work to team of employees.
- Recognized as a top performer among peers due to outstanding productivity levels and commitment to excellence.
- Conducted quality inspections of completed work, ensuring compliance with established standards and specifications.
- Performed troubleshooting and diagnosis on malfunctioning equipment.
- Create and Dispatch teams according to experience and skills daily.
- Perform task on SAP to keep inventory and transfer parts site to site.
- As a site lead, I work anywhere from 50-65 hours weekly to fulfill my duties.
- Work side by side with my manager to keep track of employee performance, and learning budget.
- Troubleshooting electrical, hydraulic, and mechanical systems on wind turbine.
- Optimized workflow for enhanced productivity by streamlining processes and providing technical guidance to team members.
- Repaired, upgraded and inspected electronic, electrical and mechanical systems.
- Managed team performance by training, mentoring, and motivating employees.
- Mentored junior technicians in maintenance, repair, and reporting duties.
- Monitored and enforced safety measures to mitigate hazards.
- Worked with diverse types of weather and ground conditions.
- Diagnosed and repaired problems with electrical and mechanical systems.
- Applied critical thinking and research to address complex issues.
- Maintained compliance with regulatory standards and safety requirements.
- Maximized resource utilization by scheduling work assignments based on technician availability and expertise.
- Adhered to established policies and standards to safely complete projects.
Lockheed Martin-Composite Technician
Lockheed Martin
08.2019 - 03.2021
- Streamlined workflow by organizing tools, equipment, and workspaces for maximum productivity during daily operations.
- Enhanced production efficiency through meticulous maintenance and calibration of composite fabrication equipment.
- Assisted in the development of new composite materials, contributing to breakthroughs in product design and performance.
- Achieved consistent compliance with industry standards such as AS9100 or NADCAP through diligent adherence to established procedures and protocols.
- Improved product quality by conducting thorough inspections and implementing corrective actions in the manufacturing process.
- Cured materials by setting materials at room temperature, placing under heat lamps and baking in ovens.
- Pressed layers of saturated mat or cloth into place on molds, using brushes, or hands.
- Utilized hand shears and trimming knives to trim excess materials from molds.
- Elevated overall team performance by sharing best practices and collaborating on problem-solving techniques.
Wind Turbine Technician
Siemens Gamesa Renewable Energy
01.2018 - 08.2019
- Performed root cause analysis on wind turbine tower component failures
- Climbed towers daily to inspect, troubleshoot and repair turbine equipment
- Checked electrical components of wind systems with voltage testers, multimeters, and other devices to ensure equipment worked correctly
- Followed safety protocols, regulations and codes to reduce hazards and risks to personnel and equipment
- Repaired various systems by restoring electrical, mechanical and hydraulic functions.Analyzed blueprints and schematic diagrams to determine tools and parts needed to keep equipment operating at peak levels
- Worked in confined spaces that required awkward positions to get the task done
- Worked in all different climates outdoors ; heat, cold, rain, snow, wind
- Worked around heavy equipment and parts such as; forklifts, cranes, gearboxes, generators
- Used hand tools, calibrated torque and tension tools
- Analyzed blueprints and schematic diagrams to determine tools and parts needed to keep equipment operating at peak levels
Wind Turbine Technician
Airway Services Inc.
06.2017 - 01.2018
- Climbed towers daily to inspect, troubleshoot and repair turbine equipment
- Maintained and serviced wind turbines on schedule by following exact instructions, technical information and diagrams
- Cleaned all construction areas to avoid hazards
- Continually cleaned work areas and equipment
- Managed work with little supervision
- Followed safety protocols, regulations and codes to reduce hazards and risks to personnel and equipment
- Used Forklift to gather heavy tools and parts
- Work in constant positions that are non-ergonomic
- Torqued bolts to spec with calibrated torque equipment
Alarm Technician
Universal Electronic Alarms Inc.
12.2016 - 06.2017
- Performed regular inspections to ensure alarm systems and equipment worked according to specifications
- Inspected fire and security alarm systems for both commercial and residential customers
- Installed, tested and repaired fire alarm and control systems for commercial and residential projects
- Installed, tested and serviced alarm systems, ensuring that they functioned correctly
Wind Turbine Technician
Siemens Energy Inc
11.2014 - 12.2016
- Managed work with little supervision
- Performed root cause analysis on wind turbine tower component failures
- Mentored junior team members, providing guidance on proper techniques and safety
- Exceeded customer product expectations by maintaining equipment to product quality products
- Analyzed blueprints and schematic diagrams to determine tools and parts needed to keep equipment operating at peak levels
- Checked electrical components of wind systems with voltage testers, multimeters, and other devices to ensure equipment worked correctly
- Continually cleaned work areas and equipment
Wind Turbine Technician
Airway Services Inc.
02.2014 - 11.2014
- Performed annual maintenances
- Assisted Team Lead in pitch seal replacement
- Completed Pre Task Plans and Job Hazard Analysis Sheets
- Maintained and serviced wind turbines on schedule by following exact instructions, technical information and diagrams
- Analyzed blueprints and schematic diagrams to determine tools and parts needed to keep equipment operating at peak levels
Installer/Driver
Canyon Compactor Services
12.2013 - 02.2014
- Installed, tested and serviced Industrial trash compactors, ensuring that they functioned correctly
- Drove a roll-off truck to deliver and pick up new and used units from job sites
- Used multiple types of tools; hand tools, acetylene torches, tie down straps, ect
- Forklift experience loading and unloading truck, and trailer. Also used forklift to move trash compactors around the yard
Driver/Warehouse
Conway Freight
10.2013 - 11.2013
- Loaded/Unloaded 26ft, 48ft, and 53ft trailers with freight on a forklift
- Delivered freight with 53 foot trailer and/or two 26ft trailers
- Scanned product as it came in and went out from the warehouse to track all freight
- Maneuvered tractor trailer in city limits and across interstates
Driver/Installer
Canyon Compactor Services
04.2013 - 10.2013
- Demonstrated professional conduct with clients and deliver outstanding customer service
- Performed activities on time while maintaining regular attendance and punctuality to support scheduling and work coverage
- Maintained optimal safety by adapting driving to match current traffic conditions and applying defensive strategies to avoid accidents
- Coordinated with team members and remained flexible in work scheduling
Unemployed
Unemployed
03.2013 - 04.2013
- Ask Parents for Verification
Car Detailer
Sierra Toyota Scion
04.2012 - 02.2013
- Kept supervisor informed of job progress and material requirements
- Used steam cleaning equipment to remove dirt from engine and engine compartment
- Washed various vehicles each day for Car dealership
- Vacuumed car interiors to remove any dirt and debris
- Vacuumed interior, cleaned upholstery, rugs and other surfaces and added air fresheners to interior of vehicle
- Managed work with little supervision
- Applied wax to auto body and wiped and buffed surfaces with cloth or buffing machines to prevent oxidation
Education
High School Diploma -
Quartz Hill High School
Lancaster, CA2008
Skills
- Team Lead
- Able to Read Schematics
- Forklift Certified
- Troubleshooting skills
- OSHA compliance
- LOTO CERTIFIED
Timeline
Lead Technician
Vestas American Wind
03.2021 - Current
Lockheed Martin-Composite Technician
Lockheed Martin
08.2019 - 03.2021
Wind Turbine Technician
Siemens Gamesa Renewable Energy
01.2018 - 08.2019
Wind Turbine Technician
Airway Services Inc.
06.2017 - 01.2018
Alarm Technician
Universal Electronic Alarms Inc.
12.2016 - 06.2017
Wind Turbine Technician
Siemens Energy Inc
11.2014 - 12.2016
Wind Turbine Technician
Airway Services Inc.
02.2014 - 11.2014
Installer/Driver
Canyon Compactor Services
12.2013 - 02.2014
Driver/Warehouse
Conway Freight
10.2013 - 11.2013
Driver/Installer
Canyon Compactor Services
04.2013 - 10.2013
Unemployed
Unemployed
03.2013 - 04.2013
Car Detailer
Sierra Toyota Scion
04.2012 - 02.2013
High School Diploma -
Quartz Hill High School
Similar Profiles
Stone MinerStone Miner
Wind Turbine Technician at Vestas American Wind TechnologyWind Turbine Technician at Vestas American Wind Technology
Shawn WilliamsShawn Williams
Wind Technician II (Safety) at Vestas-American Wind TechnologyWind Technician II (Safety) at Vestas-American Wind Technology
Shawn DaileyShawn Dailey
Service Technician at Vestas American Wind TechnologyService Technician at Vestas American Wind Technology
Weston MarcinowskiWeston Marcinowski
Remote MCE Tech 2 Loto 3 at Vestas American Wind TechnologyRemote MCE Tech 2 Loto 3 at Vestas American Wind Technology
Casey StilesCasey Stiles
Sales Associate at Urban Outfitters, Inc.Sales Associate at Urban Outfitters, Inc.