Nahum Mejia

Conducted comprehensive function checks on Safety Instrumented Systems (SIS) to ensure optimal performance and compliance with safety standards.
Performed calibration checks on pressure transmitters, flow transmitters, and level transmitters, ensuring accuracy and reliability of measurements.
Executed maintenance tasks on stroking valves, including disconnecting and reconnecting valves to facilitate repairs and upgrades.
Assisted Valero personnel in the execution of preventive maintenance (PM) orders, ensuring timely completion and adherence to safety protocols.
Collaborated with cross-functional teams to troubleshoot instrument malfunctions and implement corrective actions to minimize downtime.
Maintained detailed records of calibration, repairs, and maintenance activities to support regulatory compliance and operational efficiency.
Provided training and support to junior technicians and staff on instrument functionality and maintenance procedures.

• 
  
• 
  
• - **Stroking Valves**: Execute valve stroking to ensure proper operation and performance.
• - **Calibrating Instruments**: Perform calibration of various instruments, including pressure and flow transmitters.
• - **Function Testing**: Conduct function tests on pressure transmitters, flow transmitters, and thermal indicators.
• - **RTD Management**: Handle and test Resistance Temperature Detectors (RTDs) for accurate temperature measurements.
• - **Document Control**: Play a key role in managing document control processes, ensuring all documentation is up-to-date and accurate.
• - **Creating Documentation**: Utilize Microsoft software to create and maintain documents, specifications, and datasheets.
• - **Instrument Loop Sheets**: Document instrument loop sheets for each instrument, ensuring accuracy regarding their location and specifications.
• - **Drawing Coordination**: Maintain and update location drawings to reflect accurate instrument placements and connections.
• 
  
• - **Client Representation**: Act as the primary client representative, providing updates on the progress of instrument installations and commissioning.
• - **Documentation Management**: Ensure all necessary documentation is signed by the client for sold and commissioned instruments, maintaining accurate records.
• - **Loop Testing**: Perform loop testing to ensure that all instruments function correctly and communicate effectively with the control board.
• - **Troubleshooting**: Diagnose and troubleshoot issues with instruments and loops to ensure optimal performance and reliability.
• - **Instrument Commissioning**: Oversee the commissioning process of instruments, verifying that they meet specified requirements before handover to the client.

• 
  
• - Proficient in utilizing Bluebeam software for effectively managing and reviewing electrical project documentation, ensuring accuracy and compliance with industry standards.
• - Skilled in creating detailed reports and documents using Microsoft Word, presenting information clearly and professionally to stakeholders.
• - Experienced in collaboration and communication with teams using Microsoft Teams, facilitating efficient project coordination and information sharing.
• - Proficient in Microsoft Excel for data analysis and tracking, enabling streamlined project management and decision-making processes.
• - Expertise in walking down packets, conducting thorough inspections to identify and address electrical system issues, ensuring safety and compliance.
• - Proven track record of exceeding clients' needs by meticulously reviewing and refining packets before submission, demonstrating a commitment to quality assurance and customer satisfaction.

• Developed and implemented safety protocols for the team.
• Maintained daily logs of labor and equipment used on-site.
• Ensured all workers adhered to company policies and procedures.

• ordered material for turnaround turned it in to gf for order
• supervised electrical crew,tech crew,instrument fitter crew
• made sure jobs made dead line and made sure the guys stayed busy and followed quality espectations from client and company
• turned over jobs to tech and supervised sell offs of instruments to clients inco departments
• got up direct with clients electricians and instructed crew on jobs neede to be done
• made sure guys worked in safely matter
• gave safety meetings and helped safety man instruct guys

• Supervised job site operations to maintain consistent safety and hazard-free work area.
• Functioned as crew leader, overseeing work of lower-level licensed electricians and trade helpers.
• Communicated with clients to convey deadlines, scope of work and potential challenges throughout project timeline.
• Followed electrical code manuals to install and repair electrical systems.
• overseen wire pull jobs according to wire schedules for motors,instruments,valves
• overseen conduit installs and performed qc checks before turning projects over to qc
• informed general foreman of job statuses and rfi's also assisted in buble sheet for progress reports
• overseen termination crew,stress cone,instrument,junctionboxes,marshalling cabinets,dcs racks etc and verified work to turn over to qc

• Analyzed specifications and blueprints to coordinate electrical installations.
• lead 6 man crew on cable tray installation
• made sure job was done safe and according to drawings
• went to daily production meetings and turned in production for the day
• did time for guys
• looked at model to anylize job and obsticles
• find solutions to problems
• did material take off on jobs and ordered material
• lead 6 man crew on grounding job and finished
• lead 6 man crew on flare stack ahd them run all the pipe for the ignigtors installed j boxes for ignightors and thermocouples pushed in probes tested probes and verified they were wrking properly
• pulled wires for ignigtors terminated
• supervised beacon lights on flare and made sure they were on according to ffa standars
• supervised temporary power jobs on multiple generators
• supervised grounding job for cajun
• supervised holes knocked out of pdc building and wire pulls also pipe runs acording to cable tray routing
• talked to schafol and other craft supervision to let em know what i need to get job done nd keep good comunications with in us

• interpret prints
• walk down unit and mark down were pannel/plc's are gonna be located in figure out conduit runs and look at print to route conduits
• lead crew in running conduit for lighting,motors,instruments,valves,power and motor main feeds and branch outs
• had safety meeting with guys
• Checked project details to verify job site materials and equipment.
• Supervised projects to uphold schedule requirements and quality demands.
• Monitored job site parts and equipment.
• Managed sites by focusing on safety, operations and productivity.
• Implemented cost-saving measures and process improvements to align with company goals and objectives.
• Prepared and planned worksites to help jobs run smoothly.
• Kept production team moving forward for progress in daily site operations.
• did time for crew and production sheets verified before turning in
• did material take off according to print
• supervised junbo bagging area and rain station
• supervised wire pulling crew and will have amber pull our wires acorrding to wire schedule
• supervised cable tray runs
• 
  

• Connected and repaired equipment based on mechanical drawings and electrical prints.
• Reviewed line drawings to locate and splice buried fiber optic cables.
• Climbed towers, worked in confined crawl spaces and worked flexible, non-standard workweek.
• Supplied electrical services and control wiring to facilities including correctional facilities.
• Repaired electrical equipment using hand and power tools and testing and diagnostic equipment.
• Ran back-up programs for PLCs, PCs, CNCs, HMIs and VFDs.
• Rebuilt and repaired printed circuit boards.

• Run channel tray
• Pull single pair and multiple pair wires for instrumentand instrument boxes
• Install supports to run channel tray
• Terminate transmeters flow level switches preasure transmeters
• Disconnect transmeters and valves and motors for turnaround
• Check for votages
• Termiate wires in dcs

determ valves for turnaround and transmeters and motors

run conduit for new instruments and flex

terminte rtds andstart stops

take off old lighting and install new upgraded led lighting exterior

asist instrument techs in opening and closing valves

rack out motor starters and main bus buckets in mcc stations

• Remove ph probes and install new ones and buff probes
• Change elctrical motors /determ and term
• Run ocal pipe for exterior lighting
• Pull wire
• Make up instrument j boxes and power
• Change fuses and relays out
• Actuate valvevs with meter
• Asist the techs in work

run 3/4 to 2 inch rigid conduit.Bend conduit 90s saddles offsets.

• pull control and power wires for instruments and plugs and lights 
• terminate  j boxes, instrument, starter buckets,three phase motors,startstops in bucket and in field, power supplies,lights,dcs station
• install cable tray install dividers for power and signal 
• read loop checks to find wires and terminate wires
• rack in480v to 24kv breaker buckets 
• re wire buckets
• un hook motors and hook back up in turnaround for boiler and general 24kv 480 motors
• trouble shoot cuircuits 
• test for voltage with hot sticks and voltage meters
• preturn around work and 3 turnarounds in total dow texas city 
• pull permits for multiple scopes of work 
• thread pipe with power pony and 535
• wire up transformers step up and step down

• run basket tray 
• pull wire 
• run rigid pipe plastic bond also for said locations
• pull permits
• terminate buckets start stops and 3 phase motors
• check motor rotation
• run cable tray 
• trouble shoot instruments 
• terminate j boxes and power boxes 
• do loop checks on dis station 

• Consulted with supervisor electrician regarding likely risks associated with assigned job.
• Performed electrical system installation of conduit, wire, power distribution and motor controls.
• Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
• Tested electrical systems and continuity of circuits in electrical wiring, equipment and fixtures using various testing devices.
• Consistently updated knowledge of safety requirements and policies.
• Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
• Updated service record files on equipment drawings and history.
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters to complete fast-paced work.
• Installed and wired electrical hardware, including transformers, junction boxes, service panels, electrical boxes, switches and circuit breakers.
• Measured devices, including analyzers, amp meters and volt-ohm meters.
• Planned motor starter and control installations using codes and specs.
• Developed in-depth knowledge of arc flash ratings and standards.
• Maintained clean, safe and stocked work area with appropriate equipment and supplies.
• Maintained safety of electrical work and systems using test meters.
• worked side by side with knowledgeable engeneers
• instal panduit,breakers,terminal blocks, relays,timers
• run wire
• read schematics
• istall momentary switches and hand auto switches 
• multiple  emergency stops
• 
  

• run rigid conduit for motors and sensors for plc 
• install sensors limit switches 
• run seal tight to motors and terminate motors
• check motor rotation 
• wire up power j boxes
• wire up plc for solenoids and sensors and mcc statiion
• pull wire 
• install touch screen control panels for operators 
• Applied knowledge of trade tools and ability to read and follow blueprints and wiring plans to projects.
• Consulted with supervisor electrician regarding likely risks associated with assigned job.
• Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
• Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
• Tested electrical systems and continuity of circuits in electrical wiring, equipment and fixtures using various testing devices.
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
• Consistently updated knowledge of safety requirements and policies.
• Performed electrical system installation of conduit, wire, power distribution and motor controls.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Operated systems such as Andover Energy Management Systems and computers.
• Tested equipment tools such as oscilloscopes, ammeters and test lamps.
• Maintained safety of electrical work and systems using test meters.
• Provided high level and in-depth technical support by resolving inquiries by phone, e-mail and web, in manner and timeframe consistent with department and team service levels and goals.

• Adhered to work site safety protocols and reported potential hazards.
• Decreased project work time by [Number]% through introducing [Tool] use for [Type] tasks.
• Demonstrated knowledge of safety protocols and industry best practices.
• Reviewed electrical schematics and plans and followed according to specifications.
• Transported equipment and workers between job sites using company vehicles.
• Configured controllers and set up panels for [Type] installations.
• Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls.
• Safely and accurately measured, cut and bent [Type] wire using [Tool].
• Inspected wiring to evaluate issues and identify short circuits.
• Gathered parts supplies and tools in preparation for each workday or new job.
• Helped complete system installations, digging trenches and breaking up concrete.
• Minimized accidents with [Type] tool by creating effective training program for [Number] coworkers.
• Boosted job efficiency and customer satisfaction by maintaining organized and clean job sites.
• Assisted electrician in basic tasks such as handling tools and completing maintenance work orders.
• Measured and cut required supplies such as wire and conduit.

• Worked in houses and small commercial venues to install electrical systems.
• Maintained underground conduits and circuit wirings by troubleshooting and fixing problems.
• Designed blueprints and prepped job sites for installation of cables and wiring.
• Troubleshooted electrical system errors with blueprint readings and modern computer programs.
• Correctly connected wires to receptacles by installing professional wiring systems and working closely with construction team.
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
• Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
• Measured devices, including analyzers, amp meters and volt-ohm meters.
• Consulted with supervisor electrician regarding likely risks associated with assigned job.
• Applied knowledge of trade tools and ability to read and follow blueprints and wiring plans to projects.
• Installed and wired electrical hardware, including transformers, junction boxes, service panels, electrical boxes, switches and circuit breakers.
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters to complete fast-paced work.
• Updated service record files on equipment drawings and history.
• Tested electrical systems and continuity of circuits in electrical wiring, equipment and fixtures using various testing devices.
• Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
• Inspected machine parts for conformance to product specifications.
• Performed basic machine set up.
• Employed wide variety of hand and power tools including hoists, drills, precision measuring instruments and electronic testing devices.
• Set ladders, scaffolds and hoists in place for taking supplies to roofs.
• Maintained compliance with company standards to perform all maintenance activities.
• 
  

• Designed, installed and maintained [Company]’s lighting and electrical systems.
• Maintained, installed and terminated commercial shopping center’s large conductors.
• Installed and maintained commercial fluorescent lights for [Client name].
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Measured devices, including analyzers, amp meters and volt-ohm meters.
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters to complete fast-paced work.
• rated diffrent sizes of eat pipe for wiring systems
• pulled branch circuits and main feed service wires
• connected plugs,ligghts,pumps,ac units,
• read prints and interpreted them 

• troubleshoot plc cabinets 
• replace limit switches sensors
• replace damaged 3 phase motors and check rotation
• replace blown fuses
• replace lights and trouble shoot 
• rewire momentary switches 
• replace wires
• anything electrical wise need in plant i will repair along side a journey man nd engineers 
• perform preventative maintenance on equipment wire instruments
• Devoted special emphasis to punctuality and worked to maintain outstanding attendance record, consistently arriving to work ready to start immediately.
• reduce down time
• Performed various administrative functions, including filing paperwork, delivering mail, sorting mail, office cleaning and bookkeeping.

• Maintained, installed and terminated commercial shopping center’s large conductors.
• Installed and maintained commercial fluorescent lights for [Client name].
• Installed three and 4 way switches for lights and regular switches
• Install plugs quads and singles
• Pull wire
• Run mc
• Pull wire for acs and flew them in and terminate them
• Run flex for transformers and seal tight for lights outside
• Read prints to pull wire and branch out
• Pull main service wires for commercial buildings such as schools, police stations, stores,medical stations
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
• Trouble shoot electrical systems
• Install solar pannels and wire up acoording to nec