Summary
Overview
Work History
Education
Skills
Timeline
Apprentice Plumber

Nicholas Gamboa

Top Notch Texas Plumbing and Drainage
Spring,Texas
2027
Years of experience

Results-driven plumbing apprentice with hands-on experience at Top Notch Texas Plumbing and Drainage. Proficient in fixture installation and plumbing troubleshooting, I consistently enhanced client satisfaction through efficient repairs and effective problem-solving. Demonstrated strong teamwork and adherence to plumbing codes, ensuring high-quality service and minimal downtime for clients.

Work History

Apprentice Plumber

Top Notch Texas Plumbing and Drainage | 2026 - Current
  • Inspected leaks, damaged fittings, and drainage issues to identify repair needs.
  • Assisted with drain-cleaning tasks by removing clogs and setting up troubleshooting equipment.
  • Cleared drains and swapped faulty fixtures to restore plumbing service for customers.
  • Installed plumbing systems and fixtures in residential and commercial properties.
  • Positioned valves, hangers, supports, and flanges within piping systems.
  • Followed drawings, sketches, and verbal instructions to install and modify plumbing systems.
  • Improved work quality by working with coworkers and sharing knowledge across specialized plumbing tasks.
  • Improved job-site efficiency through careful planning and organization of required materials and equipment.
  • Supported emergency repair work by responding quickly and reducing downtime for clients with urgent plumbing issues.
  • Raised client satisfaction by diagnosing and repairing plumbing issues efficiently.
  • Lowered callback rates by completing thorough quality checks before leaving job sites.
  • Removed old sinks, toilets, and pipes to prepare for new fixture installation.
  • Tested new and repaired systems for leaks to confirm safe working condition.
  • Cleared sinks and toilets for customers using tools and drain-cleaning products.
  • Cut wall openings and drilled access points to allow pipe passage.
  • Filled pipe systems with water and air to locate leaks.
  • Set up appliances such as water heaters, filters, and dishwashers with correct settings for strong performance.
  • Planned pipe-system layout, installation, and repairs according to specifications.
  • Operated drill motors, grinders, chop saws, hack saws, and torches to complete work.
  • Measured, threaded, and cut materials to correct angles.
  • Read blueprints to identify needed material locations, quantities, and sizes.
  • Used clamps and brackets to secure pipes to walls, structures, and fixtures.
  • Read blueprints and schematics to identify needed material locations, quantities, and sizes.

Plumber's Apprentice

9 Months
Hunts Plumbing | 11.2025 - 08.2026
  • Supported licensed plumbers with pipe installation, repairs, and fixture replacements.
  • Measured and cut piping to match accurate residential plumbing layouts.
  • Learned code-compliant methods for soldering, threading, and sealing connections.
  • Transported tools, materials, and equipment to active job sites.
  • Checked fittings and joints for leaks, damage, and proper alignment.
  • Cleaned work areas and kept storage organized for plumbing supplies.
  • Followed safety procedures while using hand tools and power equipment.
  • Improved customer satisfaction by diagnosing and correcting plumbing issues quickly.
  • Increased efficiency through planning, organizing, scheduling, and tracking assigned tasks.
  • Showed strong problem-solving skills when unexpected challenges arose during project execution.
  • Supported cost estimation process for clients while maintaining accuracy and transparency in pricing information.
  • Demonstrated reliability by arriving punctually for work shifts prepared with required tools and equipment.
  • Adapted to varied project types while completing residential and commercial plumbing tasks successfully.
  • Reduced downtime during repairs through accurate issue diagnosis and prompt resolution methods.
  • Shortened job completion times through efficient use of tools and materials while assisting lead plumber.
  • Maintained high service quality through compliance with company guidelines and industry best practices.
  • Supported lead plumbers.

Plumbing Apprentice

3 Months
Leon's Electrical and Plumbing | 02.2025 - 05.2025
  • Helped licensed plumbers install pipe sets, fixtures, and repair materials.
  • Measured, cut, and fit piping with hand tools and plumbing equipment.
  • Assisted with leak, clog, and water pressure troubleshooting during service calls.
  • Kept materials, fittings, and tools organized to support smooth jobsite workflow.
  • Followed journeyman plumber instructions while completing onsite job training.
  • Gained practical experience through guided training under skilled master plumbers.
  • Kept up with plumbing codes and standards so work met regulatory requirements.
  • Supported lead plumbers during complex repairs while learning advanced techniques.
  • Set up water heaters, filters, and dishwashers with correct settings for performance.
  • Filled pipe systems with water and air to locate leaks.
  • Performed basic and semi-skilled work under supervision from lead plumber.
  • Measured, threaded, and cut materials to correct angles.

Apprentice Plumber

9 Months
Walls Plumbing | 04.2024 - 01.2025
  • Supported pipe installation, repair, and fixture replacement for residential drainage systems.
  • Followed safety procedures, proper tool handling, and code-compliant plumbing practices on active job sites.
  • Measured, cut, and fitted pipe sections with hand tools and power tools for routine service assignments.
  • Backed up drain cleaning work by clearing blockages and staging equipment for troubleshooting.
  • Checked leaks, damaged fittings, and drainage concerns to guide repair planning.
  • Completed basic plumbing tasks under supervisor direction with accuracy and safe work habits.
  • Kept work areas clean and protected, then restored jobsite condition after service completion.
  • Assisted licensed plumbers during installation and repair of plumbing systems.
  • Completed plumbing system and fixture installation in residential and commercial settings.
  • Placed valves, hangers, supports, and flanges within piping systems.
  • Adapted to changing residential and commercial project demands while meeting client requirements.
  • Improved work quality through team collaboration and shared plumbing expertise.
  • Matched piping type and size to project specifications.
  • Supported emergency repair response to limit client downtime during critical plumbing failures.
  • Built productive supplier and vendor relationships to support cost-conscious material sourcing.
  • Trained junior team members.
  • Operated tools and equipment safely on large-scale projects.
  • Mapped pipe system layout, installation, and repair needs based on project requirements.
  • Read blueprints and schematics to identify required locations, quantities, and material sizes.
  • Reviewed drawings and project specifications to determine proper plumbing solutions.

Plumbing Apprentice

1 Year
Hagler Plumbing | 02.2023 - 02.2024
  • Assisted with installation of 6" - 8" cast iron storm pipe drain primary and overflow.
  • Laid out storm DWV and water lines on slab.
  • Used lasers, plumb bobs, and tape measure to locate centers on floor and transfer points to ceiling.
  • Built hangers for pipe support with correct spacing for each pipe type.
  • Followed layout and checked measurements after each fitting or pipe was hung with proper fall.
  • Soldered copper piping through full process.
  • Cleaned pipe ream, pipe, and fittings, applied flux, and used torch to create clean joints.
  • Set floor drains and floor sinks with correct fall.
  • Joined pipe with bands.
  • Read prints and located walls and partitions for measurement points.

Apprentice Plumber

2 Years
Afton Incorporated | 02.2021 - 02.2023
  • Helped plumbers install pipe, repair lines, and replace fixtures in residential drainage systems.
  • Learned safety procedures, tool handling, and code-compliant plumbing practices on active job sites.
  • Measured, cut, and fitted piping with hand tools and power tools for routine service work.
  • Supported drain cleaning by clearing clogs and setting up equipment for troubleshooting tasks.
  • Moved materials, organized tools, and kept work areas clean to keep jobs moving efficiently.
  • Prepared work areas, protected property, and cleaned sites after service completion.
  • Followed supervisor directions to complete basic plumbing tasks accurately and safely.
  • Assisted licensed plumbers with installation and repair of plumbing systems.
  • Reduced potential hazards by addressing safety concerns during daily tasks.
  • Kept inventory organized and maintained adequate stock levels for project needs.
  • Removed sinks, toilets, and pipes before installation of new fixtures.
  • Tested new and repaired systems for leaks to confirm safe working condition.

Education

Bachelor of Science - Business Administration

Sam Houston State University | Huntsville, TX

Skills

Hand and power tools
Fixture installation
Piping installation
Pipe threading
Hand tool proficiency
Plumbing repairs
Drain cleaning
Water heater installation
Soldering
Gas line installation
Valve repair
Pipe installation
Plumbing troubleshooting
Pressure testing
Plumbing code compliance
Backflow prevention
Pipe insulation
Blueprint reading
Blueprint interpretation
Ventilation systems
Pipe cutting
Leak detection
Pipe bending
Installation of plumbing systems
Water system
Plumbing installation
Fixture repair
Job site safety
Equipment safety
Hand tool use
Lift up to number pounds
Pipe replacement
Valve and coupling fitting
Measurements
Problem-solving
Construction plan interpretation
Skilled with both hand and power tools
Hand and power tool operation
Installation and maintenance
Team collaboration
Blueprints and specifications
Layout planning
Residential plumbing
Detail-oriented
Commercial plumbing
Codes compliance
Plumbing fixture installation
Piping specifications
Power tool operation
Relationship building
Remodels and new construction

Timeline

Plumber's Apprentice

Hunts Plumbing
11.2025 - 08.2026Read More

Plumbing Apprentice

Leon's Electrical and Plumbing
02.2025 - 05.2025Read More

Apprentice Plumber

Walls Plumbing
04.2024 - 01.2025Read More

Plumbing Apprentice

Hagler Plumbing
02.2023 - 02.2024Read More

Apprentice Plumber

Afton Incorporated
02.2021 - 02.2023Read More

Sam Houston State University

Bachelor of Science from Business Administration
Read More

Apprentice Plumber

Top Notch Texas Plumbing and Drainage
2026 - CurrentRead More
Nicholas Gamboa