Niko Lyn
Outside Machinist/Mechanic
Norfolk,VA
Summary
Outside Machinist with intermediate skills in Fleet Support Overhaul with about 2 -3 years experience on submarines and maintained a secret security clearance. I had worked on USS Helena (SSN-725) and USS Boise (SSN-764). Both are Los Angeles-class submarines. I'm looking to further my knowledge and skill sets in an apprenticeship program. Before this industry I was an automotive mechanic for 10+ years and grew up in automotive shops when I was younger. I still have a valid VA state inspector license given to me by Virginia State Police for doing class A inspections. Before that I worked at Norfolk International Airport (ORF) as a line technician refueling private jets, single engine and major airline jets. I have had construction experience as a masonry helper, plumber helper and carpet installer helper in the construction business for a short period of time. Committed to doing the job the correct way the first time. Available 40+ hours per week, including weekends and evenings.
Overview
1
1
Certification
3
3
years of post-secondary education
14
14
years of professional experience
Work History
Outside Machinist
Huntington Ingalls Industries-Newport News Shipbuilding
Newport News, VA
02.2018 - 12.2020
- Studied daily work instruction, sketches, drawings, blueprints and manuals to determine dimensions and tolerances accurately. Familiar with mechanical joint records, mechanical joint record supplements, work permits, work authorization forms, inspection reports from engineers, and NAVSEA maintenance standards
- Removed, repaired, overhauled, installed and aligned main machinery and associated equipment and components. Worked on/in torpedo tubes, racks, torpedo ejection pumps, vertical launch system, auxiliary machine room trim and drain pumps, vh- valves, valve bearings, diesel exhaust, diesel lube oil system, snorkel, mast antenna, steering and diving, shaft work in engine room, main ballast tanks, and auxiliary tanks.
- Closely monitored equipment to detect and report malfunctions and prevent accidents.
- Obtained blueprints and support materials from suppliers and engineers. Inspected materials for quality and made sure part numbers matched paperwork.
- Manually set up machinery and equipment, including high torque machine, sprague pumps, hydraulic jacks, manifolds, and grinders.
Mechanical Associate III
CarMax
Virginia Beach, VA
11.2010 - 02.2018
- Maximized productivity by keeping detailed records of daily progress and identifying and rectifying areas for improvement.
- Educated new hires on company policies and procedures by designing and developing training program. Helped write standardized procedures for mechanical pace time for optimum productivity goals.
- Worked with sales team to collaboratively reach targets, consistently meeting or exceeding personal quotas.
- Engaged with other professionals, including mechanics, interior repair, exterior repair and paint to impart knowledge and discuss best productivity time.
- Performed diagnostic and troubleshooting procedures to find and identify root causes of mechanical issues.
- Replaced damaged, missing or defective parts with new and refurbished components.
- Maintained accurate records of time and materials required to perform repairs and service.
- Expertly utilized diagnostic equipment to evaluate mechanical problems in vehicles. Familiar with Snap On and Autel diagnostic tools.
- Supervised general repairs performed by new staff mechanics.
- Demonstrated process of preventive maintenance and visual inspections to junior mechanics.
- Operated tools, equipment and machinery according to prescribed safety procedures. Air tools, hydraulic lifts, Hunter alignment machine, Hunter tire machine, Hunter speed balancing machine, and brake lathes
- Serviced vehicles according to OEM recommended maintenance schedules for oil changes, engine tune-ups and fluid changes. Familiar with all makes and models such as Domestic, European, and Asian.
- Corrected unsafe conditions in work areas and immediately reported correctable conditions to quarterly meetings. I volunteered to be team captain spokes person for mechanical EH&S team meetings.
- Followed established safety procedures and techniques when working under lifted vehicles.
- Inspected and tested vehicles and completed preventive maintenance such as engine tune-ups, oil changes, tire rotations, wheel balancing and filter replacement.
- Performed scheduled and unscheduled maintenance tasks on Accuturn off car brake lathe and Procut on car brake lathe machines in between morning and night shifts.
- Inspected vehicles and evaluated condition of systems, equipment, lights and accessories. I am a certified Commonwealth of VA state inspector by The Department of State Police and currently hold my license for safety inspections until 04/30/2022.
- Completed full vehicle inspections to check for leaks, damage or other issues of concern.
- Consulted manuals, technical documentation and repair tree charts for further information prior to conducting fixes. Familiar with Identifix and Mitchell repair programs.
Line Technician
Landmark Aviation
Norfolk, VA
11.2009 - 11.2010
- Deliver a proactive, personalized service experience to private and business aviation clientele.
- Maintain a security identification display area (SIDA) badge to comply with Transportation Security Administration.
- Provide a variety of aircraft services, including marshaling, fueling, hangar storage, towing and other ground support.
- Operate ground service equipment, such as tugs, fuel trucks, ground power units, lavatory waste equipment and transport vans.
- Additional responsibilities included providing shuttle service for passengers/crew as required.
- Provided single engine, private jets, helicopters, and major air line jets with aviation fuel such as Jet A, Prist (fuel deicing preventative) and AVGAS 100 Low Lead for small single engines. Familiar with most makes and models for example, Cessna 172, 182, Citation, Piaggio, Beechcraft Queen Air, King Air, Bombardier Learjet, Challenger, Boeing 737, Antonov, Gulfstream G5, G6
- Topping off fuel trucks at fuel farms at end of each shift.
- Worked with all types of weather and ground conditions.
- Coordinate and direct ramp movements for arriving and departing aircraft by monitoring the flight tracker system.
- Received deliveries of aviation fuel and had to do fuel density measurements to make sure fuel were at appropriate levels before signing off on paperwork.
Oil and Lube Technician/Greeter/Detailer Technician
Checkered Flag Toyota
Virginia Beach, VA
08.2007 - 02.2009
- Changed oil and filters in customer vehicles and safely disposed of used oil in approved receptacles.
- Recommended automotive services and repairs to promote good vehicle operation and enhance road safety.
- Topped off all fluids in vehicle engines to lubricate, protect and cool engine. Toyota Avalon, Camry, Corolla, Prius, Sienna, Yaris, Matrix, Tacoma, Tundra, Scion TC and XB
- Installed wiper blades and headlamps and confirmed items' functionality to promote safe vehicle operation.
- Mounted and balanced tires to promote even wear and decrease on-the-road safety hazards.
- Worked alone or in team-based systems to complete oil changes each day.
- Assisted other lube technicians and mechanics in vehicle diagnostic and repair work to enable timely completion of service tickets.
- Greeted customers and answered questions about oil changes and other services.
- Learned to perform vehicle alignments and diagnose and repair suspension malfunctions to expand automotive services skill set. Familiar with Hunter alignment machine.
- Completed fluid checks and inspection points as complimentary service for recommendations
- Used cleaning, protective and restorative agents to maintain and enhance appearance of vehicles. Washing and waxing.
- Operated buffers, steamers, hoses, vacuums and other equipment to meet service expectations.
- Painted undercarriage frames by using spray gun and masking material. Spray painted undercarriage rust preventive and dead sounder sealer.
- Pinstriped all cars and trucks using vinyl pinstripes.
- Installed 3M invisible vinyl bras for hoods, bumpers, fenders, and side view mirrors. Company paid 3M vinyl company to train me as the only installer.
- Operated nitrogen machine and put nitrogen into all Toyota cars and trucks.
Truck Unloader/Stocker Associate
Walmart
Norfolk, VA
01.2006 - 12.2006
- Unloaded items and goods from trucks into main storage area for transfer to shelves with care.
- Monitored weights and dimensions of boxes and pallets for compliance with standards.
- Loaded and unloaded materials onto or from pallets, trays, racks, and shelves by hand.
- Sorted and properly arranged items.
- Collaborated with backroom and receiving team, working night shifts to support inventory fulfillment goals.
- Operated manual and electric pallet jacks, safely relocating heavy merchandise on sales floor for timely stocking.
- Removed all debris and packaging from boxes and separated for recycling or disposal.
- Consistently lifted materials weighing as much as 50 + pounds.
- Greeted customers and directed to requested products.
- Assisted maintenance team with organizing and cleaning warehouse, stockroom and store near shift close.
- Helped assist stockers by stocking sales floor when we had finished unloading our trucks.
Education
No Degree - Basic Course Studies
Granby High School
Norfolk, VA 09.2002 - 06.2005
Skills
Auto and engine repair
Certification
VA State Inspector
Hobbies
I enjoy working on cars and fishing with the family.
Timeline
Outside Machinist
Huntington Ingalls Industries-Newport News Shipbuilding
02.2018 - 12.2020
VA State Inspector
04-2016
Mechanical Associate III
CarMax
11.2010 - 02.2018
Line Technician
Landmark Aviation
11.2009 - 11.2010
Oil and Lube Technician/Greeter/Detailer Technician
Checkered Flag Toyota
08.2007 - 02.2009
Truck Unloader/Stocker Associate
Walmart
01.2006 - 12.2006
No Degree - Basic Course Studies
Granby High School
09.2002 - 06.2005
Similar Profiles
Tanya GilchristTanya Gilchrist
Supply Chain Specialist III at Huntington Ingalls Industries-Newport News ShipbuildingSupply Chain Specialist III at Huntington Ingalls Industries-Newport News Shipbuilding
Dimitri Grace HillDimitri Grace Hill
Insulation Installer at Huntington Ingalls Industries-Newport News ShipbuildingInsulation Installer at Huntington Ingalls Industries-Newport News Shipbuilding
Henri L. GloverHenri L. Glover
Pipefitter at Huntington Ingalls Industries-Newport News ShipbuildingPipefitter at Huntington Ingalls Industries-Newport News Shipbuilding
LATASHA BRYANTLATASHA BRYANT
X43 Production Support Foreman at Huntington Ingalls Industries-Newport News ShipbuildingX43 Production Support Foreman at Huntington Ingalls Industries-Newport News Shipbuilding
Gabriella BaranyaiGabriella Baranyai
Independent Contractor at Norview CarsIndependent Contractor at Norview Cars