Orlando Pizano Jr
Chicago,IL
Summary
Detail-oriented HVAC Installer with 5+ years of experience in residential and commercial systems, specializing in blueprint reading, electrical wiring, and refrigerant handling. Proven track record in delivering code-compliant installations and ensuring system reliability. Recognized for strong troubleshooting skills and effective communication with clients and teams.
Overview
2
2
Languages
1
1
Certification
2027
2027
years of professional experience
Work History
Modular Team Associate
Walmart
Bridgeview, Illinois
08.2025 - 05.2026
- Reset Walmart shelf modules to match current planograms and merchandising standards.
- Stocked merchandise into assigned modular sections using store inventory procedures.
- Scanned labels and tags with handheld devices for accurate shelf placement.
- Reworked aisles to support seasonal resets and floor layout changes.
- Organized backroom freight for timely movement into modular sales areas.
- Communicated with team leads about module updates and stocking priorities.
- Maintained clean work areas and safe aisle conditions during store operations.
- Assisted Walmart associates with modular setup and merchandise transitions.
- Maintained a clean, organized, and safe work environment.
- Assisted customers with product selection and purchase decisions.
- Stocked shelves, racks, and bins with new or transferred merchandise.
Heating, Ventilation, and Air Conditioning Installer
Four Seasons Heating, Air Conditioning & Plumbing - Chicago, Il
Bridgeview, Illinois
07.2020 - 03.2025
- Mounted furnaces, condensers, and evaporator coils according to Chicago code requirements.
- Installed and tested HVAC systems in commercial and residential buildings.
- Connected ductwork, piping, and electrical wiring for new HVAC equipment.
- Tested refrigerant levels, airflow, and thermostat operation before completing installations.
- Diagnosed installation issues and adjusted components for proper system performance.
- Performed start-up operations of newly installed HVAC systems to ensure proper operation.
- Tested equipment following each install to determine efficiency and proper functionality.
- Checked refrigerant levels in heat pumps and recharged units.
- Confirmed quality assurance standards were met throughout the entire installation process.
- Configured, programmed, and calibrated thermostats for optimal performance.
- Ensured safety protocols were followed during all phases of installation process.
- Connected wiring between units and power supply sources per code regulations.
- Removed old units and prepared job sites for Four Seasons heating and plumbing teams.
- Communicated with customers about equipment placement, startup steps, and care instructions.
- Provided excellent customer service by responding to inquiries promptly and accurately.
- Promptly responded to complaints about temperature problems during massive heatwave and conducted assessments to determine causes and target solutions.
- Updated and maintained service records and documentation for all HVAC maintenance and repair activities.
- Designed and implemented custom HVAC solutions to meet specific customer requirements and building specifications.
- Managed inventory of HVAC parts and supplies, ensuring availability of necessary components for repairs and installations.
- Trained junior technicians on HVAC repair and maintenance techniques, tools, and safety practices.
- Provided technical support and guidance to clients on the operation and maintenance of their HVAC systems.
- Utilized HVAC diagnostic software and tools to accurately identify and resolve system issues.
- Monitored and adjusted building automation systems to improve HVAC system performance and efficiency.
- Tested pipe, tubing joints, and connections for leaks.
- Installed furnaces, boilers and A/C units in new and existing buildings and assessed functionality of existing units.
- Put in new gas lines, wiring and other support components for HVAC systems.
- Cut and drilled holes in floors, walls and roofs to install equipment using power saws and drills.
- Mounted compressors, condensers and other components in specified locations using hand tools and various welding equipment.
- Read technical manuals and schematics to understand specific configurations.
- Evaluated work orders to ensure all tasks were clearly defined and scheduled. and discussed with supervisors.
- Inspected job site before project start to identify obstacles and resolve issues.
- Trained and guided employees on correct methods for performing different repairs and maintenance services.
- Loaded materials and tools onto truck at the beginning of each shift for efficient transport., tools and equipment on truck at beginning of each shift.
Package Handler
FedEx:Ground
Bridgeview, Illinois
11.2018 - 06.2020
- Loaded and unloaded FedEx Ground trailers using hand trucks and pallet jacks.
- Loaded and unloaded delivery vehicles efficiently, ensuring timely distribution of packages.
- Scanned packages with FedEx Ground tracking devices for accurate shipment processing.
- Scanned and sorted packages according to destinations and service type using handheld scanner.
- Scanned and sorted incoming packages by destination and priority, maintaining accuracy.
- Stacked and organized parcels to support efficient conveyor and trailer flow.
- Inspected packages for damage upon receipt to ensure quality control. and reported concerns to FedEx Ground supervisors.
- Reported any lost or damaged items to supervisors immediately upon discovery.
- Adhered to FedEx Ground safety procedures while lifting, carrying, and moving freight to maintain a safe work environment.
- Kept up to date on safety procedures and correct lifting techniques to prevent injuries.
- Participated in regular safety meetings and training sessions.
- Coordinated with team members on package handling and trailer loading to optimize workflow and ensure smooth operations.
- Followed company policies and procedures for secure package handling.
- Worked flexible hours, including weekends and holidays, to meet business needs.
- Placed bins, carts and containers in convenient locations to assist with loading efficiency.
Sanitation Worker
Unilever company
Chicago, Illinois
09.2017 - 10.2018
- Supported production-area cleaning using Unilever sanitation procedures and approved cleaning chemicals.
- Cleaned equipment surfaces in line with GMP and food safety standards.
- Removed waste from floors, drains, and collection points across plant areas.
- Disassembled sanitation tools and washed parts for daily reuse.
- Stored chemicals, supplies, and PPE according to Unilever safety rules.
- Recorded cleaning tasks and completed sanitation checklists for shift documentation.
- Followed sanitation schedule and documented cleaning activities.
- Sanitized food processing areas according to safety protocols.
- Cleaned and sanitized equipment, walls, ceilings and other surfaces.
- Removed trash and waste from work areas to designated collection points.
- Handled cleaning and sanitation chemicals by following safety precautions.
- Applied cleaning chemicals to machinery using centralized or portable foaming systems.
- Followed all safety procedures when handling hazardous materials.
- Performed periodic deep cleans of entire facility as needed.
- Demonstrated proper use of PPE and understood procedures necessary to minimize exposure to chemicals while performing daily tasks.
- Used brooms, mops and vacuum cleaners to remove dirt and debris from floors.
- Provided assistance to other departments upon request.
- Maintained janitorial closets with supplies for daily use.
- Confirmed properly labeling and storage of chemicals and cleaning items.
- Mixed and diluted caustic chemicals for use in industrial cleaning.
- Managed sanitation tasks across production areas using Unilever procedures and approved cleaning chemicals.
- Maintained equipment surface cleanliness in alignment with GMP and food safety requirements.
- Coordinated waste removal from floors, drains, and collection points throughout plant areas.
- Prepared sanitation tools for repeat daily use by disassembling and washing components.
- Delivered clean production areas through use of Unilever sanitation procedures and approved cleaning chemicals.
- Supported GMP and food safety compliance by sanitizing equipment surfaces.
- Kept plant areas clear by removing waste from floors, drains, and collection points.
- Enabled daily cleaning work by disassembling and washing sanitation tools for reuse.
Lead Installer
Polar Heating & Cooling
Orland Park, Illinois
- Installed heating and cooling systems for residential and commercial Polar Heating & Cooling projects.
- Connected ductwork, refrigerant lines, and electrical wiring to system specifications.
- Mounted furnaces, condensers, and indoor units using hand tools and power tools.
- Read blueprints, layouts, and work orders to guide installation steps.
- Coordinated jobsite tasks with technicians, supervisors, and customers on Polar Heating & Cooling calls.
- Inspected installed equipment for proper fit, safety, and operation.
- Trained new installers on company procedures, tools, and installation standards.
- Maintained clean job sites and followed safety practices during heating and cooling installations.
- Analyzed project requirements to determine the best approach for successful implementation of new systems or services.
- Demonstrated efficiency and dedication to quality by contributing to successfully completed jobs.
- Demonstrated proper use of equipment to reduce accidents and meet health and safety requirements.
- Inventoried material, tools, and equipment to record product on-hand or to be ordered.
- Read and comprehended technical documentation, checked measurements and reviewed site conditions to facilitate installation.
- Answered questions and responded to issues to deliver exceptional service to customers.
- Investigated customer complaints regarding installation processes or quality assurance practices.
- Provided regular updates on project progress to stakeholders at all levels.
- Conducted post-installation inspections to ensure accuracy of work performed by technician teams.
- Reviewed schedules and work orders to determine supplies and materials for assignments.
- Removed systems and fixtures to prepare for replacements.
- Identified potential risks associated with installations and proposed solutions to mitigate them prior to deployment.
- Surveyed job sites to identify positions and locations for equipment.
- Wired equipment while following safe electrical procedures to eliminate risk.
- Created detailed installation plans for new projects while ensuring customer satisfaction.
- Notified supervisors of faulty operations and defective materials to improve production.
- Reviewed existing documentation to identify areas needing improvement or additional information.
- Performed system upgrades and maintenance including patching, troubleshooting, and resolving hardware and software issues.
- Submitted detailed service order ticket upon job completion.
- Followed building standards and codes during unit installations.
- Performed timely and reliable service in shops and outdoors in variable weather conditions.
- Configured and tested installed systems, ensuring functionality meets customer and manufacturer specifications.
- Provided customer education on system maintenance and operation post-installation.
- Followed blueprints, diagrams, and installation instructions accurately to complete tasks efficiently.
- Utilized a variety of hand and power tools to cut, shape, and fit materials for installation.
- Ensured work area cleanliness and safety, preventing accidents and maintaining a professional environment.
- Assembled and mounted electronic equipment following technical guidelines and safety standards.
- Completed scheduled appointments on time to drive quality service.
- Adjusted, connected, or disconnected wiring, piping and tubing to complete repairs and installations.
- Disassembled dysfunctional machinery to perform root cause analysis and repairs.
- Installed new appliances, wiring and machinery in homes with defective equipment.
- Relayed important safety guidelines to clients to achieve thorough understanding of new equipment.
Education
EPA - HVAC
HVAC Technicial Institute
4400 W 46th St, Chicago, IL6063801-2020
High School Diploma -
John F. Kennedy
6325 W 56th St, Chicago , IL06-2018
Skills
- HVAC installation
- Electrical wiring
- Refrigerant handling
- Equipment maintenance
- Safety compliance
- Customer service
- Problem solving
- Time management
- Multitasking
- Pallet jack operation
- Material handling
- Logistics coordination
- Order fulfillment
- Inventory tracking
- Inventory rotation
- Team coordination
- Effective communication
- Team communication
- Work area maintenance
- Merchandising standards
- Product merchandising
- Customer engagement
- Problem-solving aptitude
- Customer engagement
- Material handling
Languages
English
Professional
Spanish
Professional
Certification
- EPA universal
Timeline
Modular Team Associate
Walmart
08.2025 - 05.2026
Heating, Ventilation, and Air Conditioning Installer
Four Seasons Heating, Air Conditioning & Plumbing - Chicago, Il
07.2020 - 03.2025
Package Handler
FedEx:Ground
11.2018 - 06.2020
Sanitation Worker
Unilever company
09.2017 - 10.2018
Lead Installer
Polar Heating & Cooling
EPA - HVAC
HVAC Technicial Institute
High School Diploma -
John F. Kennedy