Paden Parker
Durham,NC
Summary
Hard working employee with more than 6 years of experience in the power distribution industry assisting with various task ranging from underground transformer changeout and underground fault repairs to Secondary overhead residential service repair. I also have knowledge in the auto/diesel field having both worked in the field for about 2-3 years and graduated a Trade School with a focus on auto/diesel. Always open to learning new skills and come with a ready to work attitude!
Overview
9
9
years of professional experience
Work History
Class B Lineman
Pike Electric
Durham, NC
08.2017 - Current
- Ensured that all safety procedures were followed while working at heights or near energized power lines.
- Assisted in various capacities during construction, repair and maintenance of electrical lines.
- Assisted with the installation of new service drops for residential customers.
- Inspected electrical systems for faulty connections, loose wires, and other potential issues.
- Installed, maintained, and repaired aerial and underground power lines according to safety regulations.
- Adhered to strict federal and corporate rules to promote overall safety of workers and members of public.
- Repaired broken streetlights by replacing bulbs or wiring components.
- Handled repair work for overhead and underground electrical power lines.
- Followed up with customers regarding any concerns related to their service requests.
- Assessed job sites for cleanliness and organization and loaded trucks with materials at completion of shift.
- Shortened or lengthened wires by removing or adding wire and used different types of splices, connectors and clamps.
- Helped out by participating in extra shifts when emergencies or outages required additional assistance in adverse weather conditions.
- Participated in continuing education classes in order to stay current with industry trends.
- Coordinated with subcontractors when needed for the completion of projects.
- Assessed power lines, poles and electrical equipment for wear and damage and reported deficiencies to appropriate supervisor.
- Worked with team to install cables, poles and transformers.
- Responded to emergency calls in order to repair downed power lines or restore electricity services.
- Operated a variety of tools such as saws, drills, grinders, hydraulic benders and presses.
- Maintained electric work tools and equipment.
- Identified areas where additional training was necessary in order to improve job performance.
- Conducted tests on electrical systems using specialized equipment such as voltmeters and ammeters.
- Identified site hazards and utilized safety and protective equipment to comply with safety rules.
- Provided technical support to co-workers in order to complete tasks efficiently.
- Performed daily inspections of trucks, tools, ladders and other equipment prior to use.
- Patrolled lines and reported defective equipment or unsafe conditions to supervisor for resolution.
- Assisted with customer requests and answered questions to improve satisfaction.
- Planned and completed group projects, working smoothly with others.
- Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
- Provided excellent service and attention to customers when face-to-face or through phone conversations.
- Maintained updated knowledge through continuing education and advanced training.
- Completed day-to-day duties accurately and efficiently.
- Approached customers and engaged in conversation through use of effective interpersonal and people skills.
- Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
DSA (Designated Shop Assistant)
Truck Fleet Parts LTD
Norfolk, VA
06.2017 - 08.2017
- Disposed of hazardous materials properly in approved containers.
- Completed basic and semi-skilled work using available tools and facilities.
- Monitored stock levels and alerted management when supplies are running low or need replenishing.
- Cleaned shelves, counters and tables to maintain organized store.
- Drove company vehicles to transport tools, equipment and supplies to and from work sites.
- Assisted in maintaining store appearance by stocking shelves, organizing displays, and ensuring cleanliness of the shop floor.
- Assisted in training new employees on standard operating procedures within the store environment.
- Operated equipment and tools in full accordance with safety procedures.
- Assisted customers with loading their purchases into their vehicles when necessary.
- Maintained work area organization and cleanliness to uphold production levels and safety standards.
- Completed daily checklists for smooth shop operations.
- Helped shop personnel complete assignments.
- Assisted parts personnel with managing inventory, receiving and stocking.
- Understood and followed oral and written directions.
- Completed day-to-day duties accurately and efficiently.
Technician-in-Training
Ryder Truck Rentals Inc.
Raleigh, NC
03.2017 - 05.2017
- Installed new equipment according to specifications.
- Attended training sessions to stay up-to-date on best practices.
- Collaborated with other technicians to complete projects efficiently.
- Repaired broken or malfunctioning components using hand tools.
- Adhered to safety protocols while working with hazardous materials.
- Assisted in troubleshooting, diagnosing, and repairing mechanical issues.
- Conducted tests on products using various instruments and gauges.
- Updated work logs with details of completed tasks and repairs.
Automotive Technician
Mangums Truck and Auto LLC.
Stem, NC
01.2017 - 03.2017
- Repaired vehicles according to manufacturer specifications by replacing worn parts such as brakes, wheel bearings, and spark plugs.
- Maintained certifications and completed training on systems and components.
- Performed maintenance inspections, tune-ups, oil changes and other key services.
- Completed repairs and maintenance to major vehicle models to meet safety specifications.
- Used diagnostics and troubleshooting tools to identify failures and equipment issues.
- Diagnosed mechanical problems using specialized computer software and diagnostic tools.
- Replaced defective parts with new or reconditioned parts following manufacturers' instructions.
- Completed standard inspections to assess wear and damage to vehicles.
- Followed established guidelines for troubleshooting and diagnosing various types of automotive systems.
- Maintained garage safety protocols to meet regulatory and company expectations.
- Inspected vehicles for damage and recorded findings to facilitate repairs.
- Performed drive ability tests on vehicles after repairs were completed.
- Tested automotive systems such as brakes, steering, suspension, transmission and engine performance.
- Reviewed work orders and discussed with supervisors.
- Operated a variety of shop equipment safely and efficiently.
- Conducted test drives before and after repair services.
- Performed routine maintenance including oil changes, tire rotations, and brake pad replacements.
- Conferred with customers to obtain descriptions of vehicle problems and discuss work or future repair requirements.
- Cooperated with other technicians from different disciplines to achieve optimal integration.
- Maintained a clean working environment at all times.
- Inventoried stock, placed orders and verified receipt to keep supplies ready.
- Provided accurate estimates of repair times to customers prior to work being performed.
- Repaired, replaced and adjusted brakes.
- Conducted routine servicing on fuel, electrical and cooling systems.
- Utilized scan tools to diagnose drivability concerns on gasoline powered cars and trucks.
- Completed simple and advanced repairs according to specifications for brakes, exhaust and electrical systems.
- Removed, replaced, balanced and rotated new or used tires to maintain on-road safety
- Demonstrated knowledge of applicable safety procedures while performing repairs.
- Kept detailed records of repairs, labor involved and parts used.
- Conducted scheduled maintenance services such as oil changes, tune-ups, and filter replacements.
- Inspected vehicle engines and other components to identify potential issues.
- Repaired engines and transmissions, providing labor and parts cost breakdowns for work performed.
- Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
- Performed minor maintenance services, including gasket replacements, coolant flushes and tune-ups.
- Maintained updated knowledge through continuing education and advanced training.
- Understood and followed oral and written directions.
- Checked vehicle mileage and determined necessary belts, fluids flushing or gasket replacements.
- Executed preventive and corrective maintenance on work trucks and other vehicles.
- Replaced faulty wiring harnesses in order to restore proper functioning of electrical systems.
- Identified additional needed repairs by conducting visual inspections of the vehicle's interior and exterior.
- Inspected, serviced, and repaired brakes, exhaust systems, transmissions, engines, suspension systems, drive trains, fuel systems and other vehicle components as required.
- Assisted fellow mechanics when necessary during complex repairs.
DSA (Designated Shop Assistant)
Truck Fleet Parts LTD
Norfolk, VA
09.2014 - 02.2016
- Same As Currently Listed above
Education
Auto/diesel Diploma - Auto/Diesel
Advanced Technology Institute
Virginia Beach, VA03-2016
High School Diploma -
Southern Durham High School
Durham, NC06-2014
Skills
- Electrical Power Line Maintenance
- Written and Verbal Communication
- Emergency Repairs
- Hand and Power Tools
- Company Radio Usage
- Electrical System Knowledge
- Safety Procedures
- Heavy Lifting
- Equipment Selection
- Effective Customer Communication
- Parts Replacement
- System Repairs
- EPA Requirements
- Changing Oil
- Maintaining Records
- Operating Pneumatic Tools
- Brake Systems Knowledge
- Strong Work Ethic
- Team Collaboration
- Diesel Engines
- Replacing Filters
- Problem-Solving
- Electrical Understanding
- CDL License Holder
Timeline
Class B Lineman
Pike Electric
08.2017 - Current
DSA (Designated Shop Assistant)
Truck Fleet Parts LTD
06.2017 - 08.2017
Technician-in-Training
Ryder Truck Rentals Inc.
03.2017 - 05.2017
Automotive Technician
Mangums Truck and Auto LLC.
01.2017 - 03.2017
DSA (Designated Shop Assistant)
Truck Fleet Parts LTD
09.2014 - 02.2016
Auto/diesel Diploma - Auto/Diesel
Advanced Technology Institute
High School Diploma -
Southern Durham High School
Similar Profiles
Seth FyffeSeth Fyffe
Senior Project Manager at Pike ElectricSenior Project Manager at Pike Electric
Bailey HarrelsonBailey Harrelson
Groundman at Pike ElectricGroundman at Pike Electric
Bailey HarrelsonBailey Harrelson
Groundman at Pike ElectricGroundman at Pike Electric
Jasen HalperinJasen Halperin
Line Worker at Pike ElectricLine Worker at Pike Electric
Brenda SanchezBrenda Sanchez
Owner/ Esthetician at Willow & Sage AestheticsOwner/ Esthetician at Willow & Sage Aesthetics