PAPPU BEHERA

Sr. Application Engineer

UdayUdyog Electronics Pvt.Ltd

01.2014 - 03.2021

A registered channel partner of DELTA, BANNER SENSORS ), PROJECT: 1 Maintain Over Head Water Level That Should Not Run Under Dry Condition
The objective of the project is to steadily maintain the overhead tanks water level
No tower should run under dry condition
Water filled to the overhead tanks from sumps
A remote PLC is provided for each tower
Float switches are used as inputs to the plc
One main PLC will always monitor the remote PLC inputs and checks the status and runs the pumps as per the requirement
PROJECT: 2 HIGH SPEED LIQUID FILLING MACHINE
It is a liquid packaging application
The objective is to packaging of processed milk as per the selected quantity
Servo is used to get high precision on pouch length and increased speed
I-mark sensors are used for better sealing length
5” DELTA make HMI is used to comfort the operator to adjust the machine as per requirements
PROJECT: 3 AUGER FILLING MACHINE
It’s a solid filling machine used in packaging of granules and solid powders as pert the required quantity
Two servo sets are used to complete the machine along with one plc of required I/Os and HMI
HMI is used to set the setting of the machine and to select the packing quantity
PROJECT: 4 OXIDATION ROLLER TEST (SPM)
Machine is used to test the oxidation effect on the object as per standard procedure
PLC is used to execute the machine logic with two channel analog output module
HMI is used to enter the commands to control the flow of oxygen and nitrogen and also set other parameters through RS232 protocol
PROJECT: 5 ROTARYINDUCTION MACHINE (SPM)
AB PLC is used to develop and execute the logic with 64 numbers of Inputs and Outputs
With a interlocks
PROJECT: 6 TUBE FILLING MACHINE
SERVO, HMI & PLS is used to complete the machine using RS-485 protocol
Servo motor is running with high precision in pulse mode
Encoder is used to taken measure the angular position of the machine
PROJECT: 7 PC GAME SYNCHRONIZATION WITH SERVO
Two SERVO motors are used to synchronies the chair as per the game’s movement
PLC gets commands from the PC through RS-232 Protocol
PROJECT: 8 ELEVATOR PROGRAMMING AND COMMISSIONING OF DELTA MAKE VFD FOR BOTH MR& MRL SITES
Objective is to run the car cabin of the elevator smoothly as per the command getting from controller with slow and high speed
9 REPLACE AND PROGRAMMING OF DELTA SERVOWITH MITSUBISHI SERVO
WITHOUT CHANGING PLC LOGIC
Changed the servo drive of other make with delta make servo without disturbing the PLC logic
Understand and changed the wiring of servo connection as requirement
PROJECT: 10 INSTALATION AND COMMISSIONING OF 185 KW AC DRIVE
Set the parameters and made connection for control circuit as per the requirements.
Analyzed and developed technical solutions to meet business requirements.
Learned and shared knowledge of new technologies to support technically challenging projects and assume various responsibilities.
Implemented consistent coding practices.
Reviewed existing programs to refine, reduce operating time and improve techniques.