Patrick casey
Hamilton,OH
Summary
IBEW Journeyman Wireman with 11 years in the trade. Detailed in troubleshooting, interpreting blueprints, and installing electrical components to specifications. Worked at many large scale jobs including two Aligned data centers, two Proctor and Gable facility's, Markland Dam, Nucor Steel, Leipsic Steel, and Plant Vogtle units 3 and 4. All of these jobs came with responsibilities of AC/DC controls, high and low voltage power distribution, troubleshooting, working under pressure, and ensuring that everything has been installed to code and to job specifications.
Overview
11
11
years of professional experience
Work History
Journeyman Electrician
Bechtel
09.2025 - 10.2025
- Solar farm for Kennacott Copper Mine
- Upholding IBEW Code of Excellence
- Upholding safety standards
- Installing solar panels
- Terminating solar panels
- Pulling Cable
Journeyman Electrician
Rosendin Electric
07.2024 - 08.2025
- Battery storage for solar field
- Upholding IBEW Code of Excellence
- Upholding safety standards
- Installing conduit from 3/4 to 4 inch
- Pulling medium voltage cable
- Terminating medium voltage cable
- Installing Cable tray
Journeyman Electrician
Skyline Electric
05.2025 - 06.2025
- Northrup Grumman Missile silo and storage facility
- Upholding IBEW Code of Excellence
- Upholding safety standards
- Running 3/4 to 2 inch Rigid Metal Conduit
- Terminating cable in a PLC control panel
- Pulling Cable in a control panel, in conduits, and in cable tray
- Working at heights from a lift
- Working suspended for a crane in a basket in the missile silo
- Reading blue prints and schematic drawling
Journeyman Electrician
Cache Valley Electric Co.
11.2024 - 04.2025
- Working at Alligned Data Center build out
- Upholding IBEW Code of Excellence
- Upholding safety standards
- Running EMT conduit 3/4 to 4 inch
- Drilling anchors to set the Gear
- Setting the battery storage units, setting the data racks, and setting the gear
- Designing the conduit racks
- Drilling into the gear and battery storage units
- Terminating 480v wires to a fine spec
- Working closely with Quality Control team
- Using the torque wrench to ensure specs were met as the Quality Control watches
- Torque sealing the terminations after Quality Control confirms that its at the correct spec
- Working on the IPad with Quality Control to sign off and confirming that each and every termination was terminated to spec
Journeyman Electrician
Winward Electric
09.2024 - 11.2024
- Working at a Northrup Grumman Missile Cleaning facility
- Upholding IBEW Code of Excellence
- Upholding safety standards
- Installing 3/4 to 2 inch Rigid Metal Conduit
- Working at Heights from Scissor and Articulating lifts
- Pulling 120v to 480v wire
- Terminating 120v to 480v wire
- Installing cable tray
- Proper grounding and bonding to the building and the shell of the facility
- Setting light poles for the parking lot and driveway
- Terminating in the PLC control panels
Journeyman Electrician
Wasatch Electric
05.2024 - 09.2024
- Working at Aligned Data Center shell build
- Running 3/4 to 1 inch EMT
- Setting strut racks and supports for conduits
- Stringing and supporting temporary lighting
- Climbing and working from scaffold
- Working from scissor lifts
- Mounting panels
- Pulling 120v to 480v wire
- Working on the roof making penetrations for the back up generators
Journeyman Electrician
Rydalch Electric
04.2024 - 05.2024
- Working at a office building for a school
- Upholding IBEW Code of Excellence
- Upholding safety standards
- Running 3/4 to 2 inch EMT conduit
- Pulling 120v to 480v wires
- Terminating in electrical panels
- Setting cable tray
- Working from ladders and lifts
Journeyman Electrician
Cache Valley Electric Co.
02.2023 - 03.2024
- Working at multiple different jobsites. Nucor steel, Logan Hospital, Aligned Data center shell build, and Salt Lake City Airport
- Upholding IBEW Code of Excellence
- Upholding IBEW safety standards
- Demolition of conduit, wire, and gear and Nucor Steel
- Installing new gear at Nucor Steel
- Running 3/4 to 2 inch Rigid Metal Conduit at Nucor Steel
- Pulling low voltage to 480v wire at Nucor Steel
- Working with Nucor Quality Control to ensure it meets the Nucor Steel quality and the correct Specifications
- Setting and daisy chaining lighting at Logan Hospital
- Setting and daisy chaining 120v outlets at Logan Hospital
- Running 3/4 to 1 in branch conduits at Logan Hospital
- Running 3/4 to 4 in conduits at Aligned Data Center
- Branching fire alarm conduits at Aligned
- Pulling 120v to 480v and fire alarm cable at Aligned
- Working closely with Quality Control to ensure proper installation and terminations at Aligned
- Working outside running cable tray to the back up battery and back up generators at Aligned
- Working off a 3D model for running conduit and setting gear at the Salt Lake City Airport
- Setting supports and conduit racks
- Working from boom, scissor, and articulating lifts
- Wall penetrations drilled or cut out for cable tray or conduits
- Installing underground conduits in the trenched
- Working with Quality Control to ensure proper installation and specifications being met at the Airport
- Terminating wire in for the bag conveyers belt at the airport
Journeyman Electrician
Henry F. Teichmann
11.2022 - 01.2023
- Working at Owens Corning Nephi Plant
- Upholding IBEW Code of Excellence
- Upholding safety standards
- Demolition on old wire, conduit, and gear
- Setting new gear
- Running 3/4 to 2 inch rigid conduit
- Working from lifts
- Setting outside lighting on the side of the building
- Terminating 120v to 480v wire
Journeyman Electrician
Electrical Corporation of America
05.2022 - 11.2022
- Working at a Amazon Distribution Facility
- Upholding IBEW Code of Excellence
- Upholding safety standards
- Running 3/4 to 2 inch EMT conduit
- Pulling wire to the conveyer belt switches, PLC control cabinets, and sensors
- Terminating the cables to the correct places and working with Quality Control to ensure proper installation and specifications are being met
Journeyman Electrician
Wasatch Electric
10.2021 - 03.2022
- Working at Proctor and Gable
- Installing temporary lighting
- Setting gear
- Running 3/4 to 4 inch EMT
- Running 3/4 to 1 inch RMC
- Pulling 120v to 240v wire
- Hanging lights
- Setting lights in the ceiling grid
- Working from lifts
- Working from ladders
- Terminating in panels
- Installing fire alarm conduits and terminating fire alarm systems
- Troubleshooting electrical issues
- Replacing ballasts in lights
Journeyman Electrician
Bechtel
11.2020 - 06.2021
- Plant Vogtle Nuclear Power Plant Units 3 and 4
- Extensive 5 day safety classes
- Working from nuclear packets
- Ensuring every piece of conduit, every cable tray, and any other raceway was installed and labeled according to nuclear packet
- Walking with Quality Assurance, Quality Control, and Engineers to confirm and get signed off on the fact that every raceway was installed and labeled according to nuclear packet
- Pulling the correctly labeled cable in the raceway after being signed off
- Confirming and signing off with QA and QC that the cable is in
- Properly Terminating the Cable on both ends
- Confirming and signing off with QA and QC that the cable is terminated to specifications of the nuclear packets
- Working off of scaffolding at height upwards of 300 feet to pull the cable in the correct raceways
Journeyman Electrician
Keiwit Construction
02.2020 - 10.2020
- Wind Farm
- Upholding IBEW Code of Excellence
- Upholding safety standards
- 3M 35KVA splicing and T-Body terminations training
- 35KVA underground splicing from 4/0 to 1500KCM
- 35KVA T-Body and terminations in Junction boxed and at the base of the windmills from 4/0 to 1500KCM
- Testing with 50k Volt to ensure no electrical leaks in the splicing and terminations
- Ensuring proper shore on trenches
Journeyman Electrician
Lake Erie Electric, Inc.
11.2019 - 02.2020
- Leipsic Steel Mill
- Upholding IBEW Code of Excellence
- Upholding safety standards
- Installing 3/4 to 2 inch RMC
- Pulling and terminating wires
- Setting gear
- Mounting panels
- Working from lifts
Journeyman Electrician
Cummins Electric
05.2019 - 10.2019
- Working at Sugar Creek Food Processing Plant
- Training for working in a food processing plant
- Working in a clean facility and ensuring good working manners and cleanliness
- Terminations on large scale ovens and cookers
- Terminations on food conveyors
- Running stainless steel rigid from 3/4 to 1 inch
- Pulling cable
- Working from lifts
- Working from ladders
Apprentice Electrician
Glenwood Electric
01.2017 - 05.2019
- Proctor and Gable
- Upholding IBEW Code of excellence
- Upholding safety standars
- Learning from Journeyman
- Running 3/4 to 4 inch EMT
- Troubleshooting electrical problems
- Installing HVAC actuators
- Pulling wire and terminating actuators
- Drilling wall and floor penetrations
Apprentice Electrician
Chapel Electric
05.2015 - 12.2017
- Working at many jobsites
- Upholding IBEW Code of Excellence
- Upholding safety standards
- Learning from Journeyman
- Assisting with what the Journeyman needed
- Running parts
- Pulling wire
- Learning how to run conduit
- Learning how to support conduits and build racks
Apprentice Electrician
Synergy Electric
07.2014 - 04.2015
- Multiple jobs
- Learning about and upholding IBEW Code of Excellence
- Learning about and upholding safety standards
- Learning from the Journeyman an superiors
Education
High School Diploma -
Edgewood High School
Trenton, OHHigh School Diploma -
NJATC
Hamilton, OHSkills
- Electrical troubleshooting
- Conduit bending
- Blueprint reading
- Circuit installation
- Hand and power tools
- Electrical testing
- Fire alarm systems
- Electrical repair
- Safety awareness
- Low-voltage systems
- Electrical circuits
- Wiring diagrams
- Equipment troubleshooting
- Motor controls
- Building codes
Timeline
Journeyman Electrician
Bechtel
09.2025 - 10.2025
Journeyman Electrician
Skyline Electric
05.2025 - 06.2025
Journeyman Electrician
Cache Valley Electric Co.
11.2024 - 04.2025
Journeyman Electrician
Winward Electric
09.2024 - 11.2024
Journeyman Electrician
Rosendin Electric
07.2024 - 08.2025
Journeyman Electrician
Wasatch Electric
05.2024 - 09.2024
Journeyman Electrician
Rydalch Electric
04.2024 - 05.2024
Journeyman Electrician
Cache Valley Electric Co.
02.2023 - 03.2024
Journeyman Electrician
Henry F. Teichmann
11.2022 - 01.2023
Journeyman Electrician
Electrical Corporation of America
05.2022 - 11.2022
Journeyman Electrician
Wasatch Electric
10.2021 - 03.2022
Journeyman Electrician
Bechtel
11.2020 - 06.2021
Journeyman Electrician
Keiwit Construction
02.2020 - 10.2020
Journeyman Electrician
Lake Erie Electric, Inc.
11.2019 - 02.2020
Journeyman Electrician
Cummins Electric
05.2019 - 10.2019
Apprentice Electrician
Glenwood Electric
01.2017 - 05.2019
Apprentice Electrician
Chapel Electric
05.2015 - 12.2017
Apprentice Electrician
Synergy Electric
07.2014 - 04.2015
High School Diploma -
Edgewood High School
High School Diploma -
NJATC