Phally Lach
Taunton,MA
Summary
Detail-oriented in manufacturing and production environment . Adept at interpreting blueprints, working with others and meeting production deadlines.Small piece assembly in medical usage productions and other diagnosis products.Assembly Line Worker in a large scale manufacturing environment. Safety-conscious with a strong attention to detail. Versatile in other areas of company demands and needs to be filled.Responsible and a hardworker who can collaborate with a team and produce quality work on tight deadlines.
Overview
10
10
years of professional experience
Work History
Electronic Mechanical Assembler
QinetiQ
Franklin , MA
02.2022 - 03.2024
- Assembled complex electrical and mechanical assemblies following engineering drawings, work instructions and verbal instructions.
- Verified quality of components using various measuring instruments such as calipers, micrometers, gauges.
- Identified and resolved issues with mechanical or electronic parts during assembly process.
- Performed basic soldering on wires to terminals for the purpose of connecting circuits.
- Tested assembled products for proper operation according to established standards and procedures.
- Disassembled defective units to determine cause of failure and repaired accordingly.
- Installed hardware such as nuts, bolts, screws, washers onto assemblies as necessary.
- Replaced faulty components with new ones after consultation with engineering staff.
- Calibrated equipment by adjusting functional parts to meet specifications outlined in documentation provided by engineers.
- Read blueprints, schematics and diagrams to determine the method of assembly of a unit or its component parts.
- Inspected completed subassemblies prior to final assembly ensuring all parts were accounted for and met specified criteria before proceeding further into production process.
- Utilized hand tools such as screwdrivers, wrenches, power tools such as drills, pneumatic tools such as air ratchets as required for specific tasks.
- Completed final installations by placing assemblies and subassemblies into cases.
- Joined parts to assemble using hand tools and machines.
- Operated drill press to press out and attach bearings and parts.
- Calibrated sensors, drives, motors, encoders, switches, actuators, vision systems., used in robotics applications.
- Reviewed drawings and blueprints required for the construction of robots.
- Installed, tested and maintained robotic systems to ensure optimal performance.
Production Tech II
Ultra Clean Technology
Scarborough, ME
07.2017 - 02.2022
- Performs Quality Control upon release of product/inventory before release of shipment and onto next process areas.
- Process parts utilizing both chemical and manual cleaning methods.
- Able to work in cleanroom for extended periods. Ability to work independently and as a part of a larger team of technicians
- Perform receiving, processing, wiping, scrubbing, masking, chemical processing, machine operating, etching, blasting, coating, drying, baking, and other processes,working and handling fragile parts as needed.
- Able to work 12-hour shifts in a fast paced environment.
- Flexible work schedule and the ability to work overtime on short notice.
- Refurbishment of semiconductor parts process.Following recipes and documents according to sop.
- Following all environmental protection, safety and health procedures, reporting accidents and spills promptly, and making recommendations to improve safe work practices. Maintaining a safe work environment, which includes housekeeping, labeling and proper disposal of waste.
- Setting up and operating production equipment; loading and unloading data entry and documentation of processing and shipment of lots
- Using computers for automated processing of product.
Cleaning the work area and complying with Clean Room work rules. Lifting and bending consistently of heavy products. - Verified quantity and quality of products pre-shipment to comply with production standards.
- Reviewed production schedule, customer orders, work orders and requisitions to determine items to be moved, gathered or distributed.
- Trained new employees on proper techniques for packaging, equipment operation and inventory management.
- Inspected items and accepted or rejected products according to acceptability standards determined by Good Manufacturing Principles, customer requirements and standard operating procedures.
Quality Inspector
Belmont Instrument Corp
Billerica, MA
02.2015 - 05.2017
- Rework or reject subassemblies or finished products as required. Conduct and document process and system audits using written procedures as audit standards
- Accurately document the results of the inspections and testing. Maintain all controlled document files and test records in a timely and accurate manner
- Coordinate calibration of all test equipment and fixtures. Monitor critical equipment and instrumentation to ensure proper operation and calibration
- Participate in the construction and/or revision of SOPs for the inspection function. Assist in the writing and updating inspection procedures, protocol and checklists
- Evaluate problems and make initial recommendations for possible corrective action to supervise
- Work with production management and Quality Assurance to provide feedback to assemblers regarding. accuracy of assembly procedures
- Perform review of Device History Records and other documentation for compliance to established procedures,and Good Documentation Practices. Assist in and helping other departments when help is needed
Alere I-Nat Production
Alere
Saco, Maine
10.2014 - 02.2015
- Experienced in the manufacture and production,following SOP restrictions,
- Set up and performed hand and automatic assembly operations on components, sub-assemblies and assemblies
- Assembled components with hand and power tools.Assessed work for errors or compliance issues and made corrections and modifications when necessary
- Determine materials, tools and equipment needed for product orders.Attentive inspection of small piece diagnosis medical product
- Operating of machinery,usage of eye and hand coordination, working as a team and individual work to meet production quotas,fill room trained for vaccines,placement of areas needing coverage.Kit line work,clean room environment manufacturing
- Changing equipment over to new product. Microscope and magnified usage
Production
RTS Packaging
Saco, Maine
08.2014 - 10.2014
- Sorting and organizing of incoming inventory,Separation of partition and paper goods,
- Cleaning of warehouse, standing for long lengths of time, team work and individual, understanding of number system of workload upon demands of workload,
- Working in a time efficient matter, stripping material in preparation of shipment's, packing and handling, assist of areas need filled,Assessed work for errors or compliance issues and made corrections and modifications when necessary
- Usage of pallet jack,placement of material accordance to diagram
- Picking out orders,Completed and entered quality records, scrap reports and machine logs in a timely manner
- Reporting and working with management,Maintained proper stock levels on a line
Engine Premiers Production
Nicholas
Portland, Maine
02.2014 - 08.2014
- Loading and unloading of sinister furnace ,Placing parts in trays,Dipping gilcote and SP-9, cleaning,
- Able to accurately understand sp data sheet.working in a fact pace work environment,organization of ceramic rings, repetitive hand and eye coordination,quality assurance, constant bending and lifting
- Changed equipment over to new product.,operating several machines in a timely matter,working in a hot temperature environment,
- Drafted a timescale for all jobs.Inspected finished products for quality and adherence to customer specifications
- Planned and laid out work to meet production and schedule requirements, communicated with management in relations to work and performance of business needs
Education
High School Diploma - High School Diploma
Farrington High School
2012
Skills
- Testing and troubleshooting
- Blueprint Interpretation
- Lean manufacturing principles
- Mechanical Assembly
- Schematic Interpretation
- Packing and handling
- Quality inspection
- Quick learner in projects
- Production scheduling familiarity
- Materials knowledge
- Kit line production
- Sand blasting and refurbished of semiconductor parts
- Assembly line experience
Skills
- Customer service oriented
- Great organization skills
- Quick learner
- Able to understand diagrams and blue prints
- Sand blasting and refurbished of semiconductor parts.
Timeline
Electronic Mechanical Assembler
QinetiQ
02.2022 - 03.2024
Production Tech II
Ultra Clean Technology
07.2017 - 02.2022
Quality Inspector
Belmont Instrument Corp
02.2015 - 05.2017
Alere I-Nat Production
Alere
10.2014 - 02.2015
Production
RTS Packaging
08.2014 - 10.2014
Engine Premiers Production
Nicholas
02.2014 - 08.2014
High School Diploma - High School Diploma
Farrington High School
Similar Profiles
Daniel BeatsonDaniel Beatson
Maintenance Manager at QinetiQMaintenance Manager at QinetiQ
Cody JohnsonCody Johnson
Paint Technician at QinetiQPaint Technician at QinetiQ
Ashur McDuffie Jr.Ashur McDuffie Jr.
Security Specialist - Team Lead at QinetiQSecurity Specialist - Team Lead at QinetiQ