QUENTIN MANNS
New Port Richey
Summary
Dedicated Electrician with extensive experience in new home construction and major commercial projects. Expert at residential installations of interior and exterior wiring for appliances, lighting and outlets. Speedy with focus on meeting tight deadlines on time.
Overview
6
6
years of professional experience
1
1
year of post-secondary education
Work History
Electrician/PV installer
Sundog solar
Searsport
11.2025 - 04.2026
- Drive and maintain company vehicles.
- Other duties including, sorting, lifting operating panel lifts, wire management and panel installation.
- Install base attachments and familiar with Snap&Rack materials.
- Work in all forms of weather.
- Work with crews to ensure efficient production and give the client a quality product
- Trenching and excavations
- Cable install and wire pulls, single phase and
- Installed solar panel systems on residential and commercial buildings.
- Collaborated with team members to troubleshoot electrical issues.
- Conducted routine maintenance on electrical systems and components.
- Ensured compliance with local electrical codes and safety regulations.
- Assisted in the design of solar energy solutions for clients.
- Utilized hand and power tools for electrical installations effectively.
- Provided training to junior electricians on best practices.
- Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
- Installed conduit, wire and motor controls.
- Connected wires to circuit breakers, transformers, or other components.
- Worked extensively on three-phase, 277/480 volt power distribution systems.
- Interpreted schematics, blueprints and diagrams to complete projects on time.
- Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
- Diagnosed issues in electrical circuits and equipment and took proper corrective or preventive measures for repair.
- Resolved safety issues related to faulty wiring installation practices in a timely manner.
- Inspected electrical equipment and systems to identify hazards, defects and the need for adjustment or repair.
- Diagnosed malfunctioning systems, apparatus and components to locate cause of breakdowns and correct problems.
Solar Panel Installer
Avvio Solar
06.2025 - 08.2025
- Residential rooftop and ground-mount PV installations.
- Here I was following NEC code compliances and building codes.
- Racking assembly and roof attachments being installed according to spec.
- Panel installations and wire management.
- Other duties involved installing Enphase and solar edge equipment.
- I've gained experience and to
- System commissioning and troubleshooting.
- Driving and hauling trailers as needed.
- Collaborated with team members to ensure safe installation practices.
- Conducted site assessments to determine optimal solar panel placement.
- Installed solar panels on residential and commercial rooftops efficiently.
- Assisted in training new installers on safety protocols and best practices.
- Updated project documentation to reflect installation progress and changes.
- Installed solar panels safely in extreme hot and cold weather, in confined crawl spaces and on roofs of multi-story buildings.
- Laid out and installed mounting hardware, such as brackets, bolts, and screws.
- Organized tools and supplies needed for each job site prior to arrival.
- Attended training sessions regularly in order to stay current on safety procedures and product knowledge.
- Connected wiring from the solar panels to inverters or other components in accordance with local codes and regulations.
- Inspected work sites prior to installation to ensure that all necessary materials were present.
- Assisted in troubleshooting problems with existing PV systems to determine repair needs.
- Ensured that customer expectations were met throughout the entire process.
- Filled out paperwork associated with each job accurately and completely.
- Identified and resolved photovoltaic system deficiencies, adjusting, and configuring inverters and controls to account for desired set points and operating modes.
- Identified and resolved electrical and environmental concerns negatively affecting system stability or efficiency.
Skilled Laborer/PV Installer/Driller
Louth Callen Renewables
06.2024 - 05.2025
- Duties including trenching and excavations.
- Operating excavators ranging from 50-650.
- Task such as shoveling, digging, raking and other general labor.
- Ground screw installation and pile driving.
- Operating PD-10 and ground screw attachments for solar foundations.
- String-lining and leveling and aligning arrays according to specs.
- Wiring and terminating for AC and DC loads.
- (Re-hired)
- Operated machinery for renewable energy projects safely and efficiently.
- Maintained tools and equipment to ensure readiness for daily tasks.
- Collaborated with team members to complete projects within set timelines.
- Loaded and unloaded materials, ensuring proper handling and storage procedures.
- Conducted routine inspections of job sites for compliance with safety standards.
- Documented daily activities and reported issues to supervisors promptly.
- Utilized heavy machinery such as forklifts, cranes or backhoes to move large loads safely.
- Cleaned up debris from construction sites after work was completed each day.
- Measured, cut and bent metal pieces using hand tools or machinery.
- Read blueprints or diagrams to determine the best method of assembly for products.
- Set up equipment to maintain worksite productivity.
- Filled trenches and holes using shovels and compactors to job site specifications.
- Leveraged rigging equipment to move materials or structures on job site.
- Used laser measuring tools to calculate lengths, widths, and heights.
- Performed basic maintenance on machines and tools.
- Signaled construction equipment operators to facilitate alignment, movement and adjustment of machinery.
- Used hand tools to spread gravel, asphalt and other materials over surfaces.
- Controlled traffic to protect work site integrity, crew safety, and general public welfare.
- Transported materials between locations in order to complete projects on time.
- Understood how to operate and maintain job site equipment safely and for maximum productivity.
- Dug ditches or trenches, backfilled excavations or compacted and leveled earth to grade specifications.
- Measured, marked or recorded openings or distances to construction layout areas.
- Lubricated, cleaned or repaired machinery or equipment.
- Installed photovoltaic systems on residential and commercial rooftops.
- Provided training on proper use of safety gear such as harnesses, hard hats, gloves and protective eyewear.
- Conducted periodic tests to assess system functionality and identify any potential problems.
- Followed local regulations and safety standards during all installations.
- Installed roof-mounts, ground mounts, racking systems and other components in accordance with local codes.
- Collaborated with customers to explain how the PV systems worked and answered questions regarding operation and maintenance needs.
- Worked closely with project managers throughout the entire process from start to finish.
- Operated drilling equipment to execute precise borehole operations.
- Managed rig move and drilling operations.
- Assisted with moving rigs from one location to another for different jobs.
- Supervised a team of workers who assisted with various aspects of the drilling process.
- Supervised all day drilling operations and provided troubleshooting expertise.
- Cleaned and maintained work areas after every job was completed.
- Listened to operating drills, confirmed normal vibrations and collected material samples from hole to monitor output.
- Observed drilling or boring machine operations to proactively detect issues.
3rd Year Electrical Apprentice
Capital Construction
Galway
11.2023 - 03.2024
- After completing trade-school I did multiple sites in upstate New York.
- Worked in all types of weather and long hours with brutal conditions.
- Tasks involved AC wire pulls as well as DC.
- Combiner box terminations as well as switchgear and transfer load side connections.
- As well as hanging inverters and inverter rack assembly.
- Electrical pad layouts and conduit installations.
- Assisted in installation of electrical systems and components for residential projects.
- Supported senior electricians by preparing materials and tools for job sites.
- Connected wires to circuit breakers, transformers, outlets, or other components.
- Installed conduit for new construction projects.
- Ensured compliance with all applicable codes related to the installation of electrical systems.
- Read blueprints and schematics to determine layout of electrical wiring and equipment placement.
- Dug trenches and created holes to pull conduit and install supports.
- Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
- Listened to directives of senior electrical professionals to complete efficient tasks.
- Followed relevant electrical and building codes for each job.
- Completed semi-skilled and skilled work under supervision of fully qualified professionals.
- Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
- Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
- Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
- Installed leads and connected cables to motors, apparatus and equipment.
Apprentice Electrician
Jon K Ming Elec
Temple
12.2022 - 04.2023
- Duties were removing old devices and material and replacing them with proper working equipment.
- Assisted in installing electrical systems and fixtures in residential buildings.
- Followed safety protocols while working on live electrical systems and installations.
- Lighting installation and remodeling homes.
- Here I operated scissor lift and man lifts efficiently.
- Experience with rough ins and trim outs in new construction homes and remodeled dwellings.
- Supported team members by providing assistance during complex electrical tasks.
- Measured, cut and bent wire and conduit using hand tools and power tools.
- Installed electrical wiring and fixtures, such as outlets, switches, circuit breakers, junction boxes and wall sockets.
- Installed lighting fixtures such as fluorescent bulbs or LED lights.
- Assisted with electrical installation tasks, added new wiring, and adjusted breaker boxes.
- Kept work areas clean, neat, and free of hazards.
- Worked in team-based environment to accomplish projects.
- Worked in all weather conditions and on multiple types of ladders and mechanical lifts.
- Verified measurements and made accurate cuts to avoid wasting materials on job sites.
- Ensured compliance with relevant codes related to the National Electrical Code.
- Listened to directives of senior electrical professionals to complete efficient tasks.
- Measured and prepared supplies for electrical tasks.
- Connected wires to circuit breakers, transformers, or other components.
- Performed installation, maintenance and tests of electrical energy systems and components by safely using all equipment and tools.
- Set up equipment and configured settings for optimal performance.
Skilled Laborer/Panel Technician
Tradesource contractors and staffing
Maine
11.2021 - 05.2022
- Job sites in Maine USA which included contractors looking for traveling installers for multiple projects.
- Some of the duties involved crew management, commercial wiring for AC/DC systems.
- Module installation and plug and play as well as wire management were all common practices.
- General labor tasks were assigned.
- Worked in all types of weather for long hours.
- Operated hand tools and equipment for various construction tasks.
- Collaborated with team members to ensure effective communication.
- Followed safety protocols to minimize risks on job sites.
- Operated power tools and equipment to complete assigned tasks.
- Measured, cut and bent metal pieces using hand tools or machinery.
- Read blueprints or diagrams to determine the best method of assembly for products.
- Set up equipment to maintain worksite productivity.
- Signaled construction equipment operators to facilitate alignment, movement and adjustment of machinery.
- Assisted distribution of tools, materials, and equipment to skilled workers.
- Assisted with diverse construction challenges to help team and customer.
- Completed day-to-day duties accurately and efficiently.
- Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
- Worked with cross-functional teams to achieve goals.
PV Installer
Louth Callen Renewables
09.2021 - 02.2022
- Solar projects among the east coast and was enrolled in a apprenticeship obtaining 1,042 hours for the OTJ electrical experience for the journeyman license.
- Duties were mechanical and electrical work, such as racking assembly, staging out materials, skid-steer operations and maintenance, underground and utility work.
- Combiner box terminations and wire pulling.
- Work with PVC conduit, grounding and bonding methods.
Laborer/Electrician
Precision solar
Watson
06.2020 - 08.2020
- Responsible for racking and PV installation.
- Some duties involved wire management, mechanical and electrical work.
- Module install as well as torque tube install.
- Day to day operations of Lull forklift and skid steer.
- Utilizing laser level and string line to align post for installs, concrete and for work.
Education
Construction Electrician Program - basic electrical theory, motor controls, commercial and residential wiring and service, OSHA compliance, business management and strategies
Training center of Central Texas
Harker Heights, TX 09.2022 - 04.2023
Skills
- Circuit design
- Equipment maintenance
- Code compliance
- Customer relationship management
- Parts ordering
- Vehicle inspection
- Team collaboration
- Problem solving
- Attention to detail
- Time management
- Safety awareness
- Troubleshooting
- Organization
- Critical thinking
- Training & Development
- Excellent communication
- PPE use
- Planning
- Team building
- Active listening
- Heavy equipment operations
- Excavation/trenching/shoveling
- Inventory and logistics
- Delivery (loading/unloading)
- Solar module installing
- Torque/Marking
- Electrical system troubleshooting
- Solar panel systems
- Wire management
- Electrical installations
- OSHA 10 certified
- Efficient
- Cable installation
- Conduit bending
- Sub-panel installation
- Works well in team environment
- Electrical experience
- DC drives
- Technical documentation
- Wiring termination requirements
- National electrical code
- Knowledge of standard for electrical safety in the workplace (NFPA 70E)
- Safety procedures and regulations
- Branch circuit wiring
- Electrical installation
- AC/DC power and control systems
- Electrical testing
- Electrical wiring
- Commercial construction experience
- Wiring installation
References
- Jeff Cooper, Master, 781-603-5176
- Jon K Ming, Master, 254-279-3431
- Kent Turner, Master, 512-818-5297
- Jason Monks, Master, 254-661-0352
- Jamie Pichette, Master, pichettj5@gmail.com
- Jeff E Washer, Master, 207-351-8555
- Jon Meader, Master, 207-860-0232
- George Bennett, Master, 315-405-0393
Awards And Acknowledgements
- Certification of completion from trade school.
- OSHA and fall protection training.
- Skid steer training certification.
- Electrical helper/apprentice card (Maine).
- Approx 6000 OTJ verified electrical hours.
Timeline
Electrician/PV installer
Sundog solar
11.2025 - 04.2026
Solar Panel Installer
Avvio Solar
06.2025 - 08.2025
Skilled Laborer/PV Installer/Driller
Louth Callen Renewables
06.2024 - 05.2025
3rd Year Electrical Apprentice
Capital Construction
11.2023 - 03.2024
Apprentice Electrician
Jon K Ming Elec
12.2022 - 04.2023
Construction Electrician Program - basic electrical theory, motor controls, commercial and residential wiring and service, OSHA compliance, business management and strategies
Training center of Central Texas
09.2022 - 04.2023
Skilled Laborer/Panel Technician
Tradesource contractors and staffing
11.2021 - 05.2022
PV Installer
Louth Callen Renewables
09.2021 - 02.2022
Laborer/Electrician
Precision solar
06.2020 - 08.2020