Randall Rogers
Batesville,AR
Summary
Resourceful professional eager to utilize analytical and problem-solving skills. Proficient in using testing equipment and software programs with keen eye for precision. Smart and committed to furnishing detailed reports.
Overview
10
10
years of professional experience
Work History
Quality Control Lead Inspector
Bad Boy Mowers
10.2020 - 06.2023
- Inspected incoming and outgoing materials for accuracy and quality.
- Communicated with production team members about quality issues.
- Inspected quality of products, taking note of functionality, appearance and other specifications.
- Performed visual inspections and non-destructive tests where appropriate.
- Collaborated with production staff to establish and meet quality standards
- Reported repeated issues to supervisors and other departments, collaborating to identify issue roots and rectify problems.
- Evaluated components and final products against quality standards and manufacturing specifications.
Process Control Operator
Future Fuel Chemical Company
07.2017 - 10.2020
- Handled troubleshooting of operational issues, ceasing operations whenever conditions were hazardous.
- Described engineering-related information in terms that could be easily understood by non-technical personnel.
- Adhered to security measures and procedures to promote health and safety of all employees.
- Wrote all documentation in regards to process procedures and made updates whenever changes were implemented for overall improvement.
- Trained and mentored newly hired employees, offering assistance and insight to equip each for job roles.
- Made sure that products were produced on time and are of good quality.
- Met production targets and tight deadlines by collaborating closely with team members.
- Maintained organized work area by cleaning and removing hazards.
- Used problem-solving and issue-resolution skills to promptly and successfully address production problems.
Welder Helper
Energy Services South
02.2017 - 07.2017
- Removed trash and excess materials to clean up work areas.
- Maintained equipment in good working order.
- Kept positive attitude focused on learning new processes and techniques.
- Chipped off excess weld, slag, and spatter using hand tools.
- Prepared welding equipment to perform advanced welding work.
- Supported production needs by performing routine tasks using standard procedures and equipment.
- Monitored machinery to identify concerns, make corrections, or report complex problems.
- Fabricated shop parts directly from blueprints.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
Welder Helper
Sunland Construction
10.2016 - 01.2017
- Removed trash and excess materials to clean up work areas.
- Maintained equipment in good working order.
- Kept positive attitude focused on learning new processes and techniques.
- Chipped off excess weld, slag, and spatter using hand tools.
- Prepared welding equipment to perform advanced welding work.
- Supported production needs by performing routine tasks using standard procedures and equipment.
- Monitored machinery to identify concerns, make corrections, or report complex problems.
- Fabricated shop parts directly from blueprints.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Inspected welds and checked critical measurements to meet specifications.
Assembly Line Worker
Intimidator UTV
02.2016 - 10.2016
- Used established assembly instructions to complete jobs quickly, accurately, and with zero errors.
- Followed protocols to enhance protection and maintain safe work environment.
- Assembled components with minimal supervision, exceeding expected project milestones.
- Performed visual and functional inspection of components to determine quality and identify defects.
- Assisted quality assurance by inspecting items and removing defective parts.
- Completed durable assemblies and subassemblies with hand and power tools.
- Followed outlined specifications to implement assembly plans.
- Trained and mentored new employees to apply best practices on assembly line operations and comply with procedures and regulations.
HVAC Technician
Wades Heating, Air And Electric
09.2015 - 03.2016
- Performed troubleshooting on HVAC systems to determine root cause of issues.
- Conducted maintenance service on HVAC systems to increase life expectancy of equipment and prevent costly repair work.
- Investigated major malfunctions and breakdowns of heating and air-conditioning systems and used troubleshooting to determine causes.
- Traveled to job sites for both scheduled and emergency appointments.
- Kept accurate records of time and materials used for each job to compile into service reports.
- Worked overtime, holidays and weekends to accommodate company needs.
- Inspected and tested refrigeration systems, safety devices and controls to determine proper functionality.
- Filled out detailed work orders for each job completed.
- Read blueprints, wiring diagrams, piping schemes and engineering specifications to diagnose and repair units.
- Closed out work orders after verifying completion with customers and reporting discrepancies discovered on job site.
- Evaluated status of refrigeration liquids for safety and compliance purposes.
Chemical Operator
Future Fuel Chemical Company
01.2014 - 09.2015
- Followed all waste handling guidelines to minimize waste generation.
- Operated chemical processing equipment successfully while adhering to company standards.
- Followed safety processes and protocols while moving hazardous chemicals and operating heavy machinery to avoid and accidents.
- Communicated with supervisors and other personnel to review and discuss process changes.
- Modified controls to regulate temperature, pressure, feed, and flow of liquids and gases while monitoring outcomes and promoting successful processing.
- Safely used various machinery and forklifts during chemical drumming operations.
- Implemented safety protocols and procedures for safe, efficient process operation.
- Successfully operated chemical reactors, pumps and centrifuges to produce commercial-grade products.
- Developed and implemented preventative maintenance procedures for chemical production equipment.
- Diagnosed issues quickly and contacted supervisor to warn of potential project delays.
HVAC Technician
Middleton Heating And Air
02.2013 - 01.2014
- Performed troubleshooting on HVAC systems to determine root cause of issues.
- Conducted maintenance service on HVAC systems to increase life expectancy of equipment and prevent costly repair work.
- Investigated major malfunctions and breakdowns of heating and air-conditioning systems and used troubleshooting to determine causes.
- Traveled to job sites for both scheduled and emergency appointments.
- Kept accurate records of time and materials used for each job to compile into service reports.
- Worked overtime, holidays and weekends to accommodate company needs.
- Inspected and tested refrigeration systems, safety devices and controls to determine proper functionality.
- Filled out detailed work orders for each job completed.
- Read blueprints, wiring diagrams, piping schemes and engineering specifications to diagnose and repair units.
- Closed out work orders after verifying completion with customers and reporting discrepancies discovered on job site.
- Evaluated status of refrigeration liquids for safety and compliance purposes.
Education
Associate of Applied Science - General Technology
Arkansas State University - Beebe
Beebe, AR12.2019
Technical Certificate - HVAC Installation And Repair
Arkansas State University - Beebe
Beebe, AR03.2013
Certificate of Proficiency - Welding Technology
Arkansas State University - Beebe
Beebe, AR01.2013
Skills
- Computer-Aided Manufacturing
- Blueprint Understanding
- Quality Standards Adherence
- Safety Procedures
- Active Learning
- Reliable Attendance Record
Timeline
Quality Control Lead Inspector
Bad Boy Mowers
10.2020 - 06.2023
Process Control Operator
Future Fuel Chemical Company
07.2017 - 10.2020
Welder Helper
Energy Services South
02.2017 - 07.2017
Welder Helper
Sunland Construction
10.2016 - 01.2017
Assembly Line Worker
Intimidator UTV
02.2016 - 10.2016
HVAC Technician
Wades Heating, Air And Electric
09.2015 - 03.2016
Chemical Operator
Future Fuel Chemical Company
01.2014 - 09.2015
HVAC Technician
Middleton Heating And Air
02.2013 - 01.2014
Associate of Applied Science - General Technology
Arkansas State University - Beebe
Technical Certificate - HVAC Installation And Repair
Arkansas State University - Beebe
Certificate of Proficiency - Welding Technology
Arkansas State University - Beebe
Similar Profiles
Ronnie BristerRonnie Brister
Brake Press Operator at Bad Boy MowersBrake Press Operator at Bad Boy Mowers
Jonathan AcostaJonathan Acosta
Manufacturing Assembly Associate at Bad Boy MowersManufacturing Assembly Associate at Bad Boy Mowers
Eric FulcherEric Fulcher
Parts Specialist/Credits and Returns at Bad Boy MowersParts Specialist/Credits and Returns at Bad Boy Mowers