Summary
Overview
Work History
Education
Skills
Timeline
Generic

Randy Hogle

Columbus,OH

Summary

Dedicated Electrician with extensive experience in new home construction. Expert at residential installations of interior and exterior wiring for appliances, lighting and outlets. Speedy with focus on meeting tight deadlines on time.

Expert professional with experience completing accurate electrical work. Successfully collaborated with others while skillfully making independent decisions. Continually demonstrated excellent communication skills.

Knowledgeable professional offering several years of increasingly advanced journey-level electrical experience. Talented at inspecting, repairing, installing and maintaining electrical systems and subsystems. Flexible with wide range of hands-on experience.

Safety-focused electrician with several years of experience. Highly effective at testing electrical equipment and predicting possible electrical malfunctions. Upbeat when communicating with teammates and customers.

Accomplished Electrician with many years of experience accurately troubleshooting systems such as EMCS and variable frequency drives. Offers unfailing direction on electrical plans and specifications. Resolves issues correctly to eliminate repeat service calls.

Overview

15
15
years of professional experience
2009
2009
years of post-secondary education

Work History

Electrician

Efficient electric
Columbus, OH
01.2021 - 01.2025
  • Installed electrical wiring and fixtures in residential and commercial buildings.
  • Conducted routine inspections of electrical systems for safety and compliance.
  • Diagnosed electrical issues and performed necessary repairs efficiently.
  • Overhead wiring why it live
  • Collaborated with contractors to ensure project specifications were met.
  • Assisted in the installation of energy-efficient lighting systems.
  • Maintained tools and equipment to ensure operational readiness.
  • Followed safety protocols to prevent workplace accidents and hazards.
  • Provided guidance to junior electricians during installations and repairs.
  • Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
  • Installed conduit, wire and motor controls.
  • Connected wires to circuit breakers, transformers, or other components.
  • Connected wires to circuit breakers and transformers.
  • Repaired or replaced worn or defective parts using hand tools and power tools.
  • Ensured that all work was completed in accordance with applicable codes.
  • Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
  • Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
  • Identified problems with electrical systems by observing operation, listening for problems and using test equipment such as multi-meters.
  • Diagnosed issues in electrical circuits and equipment and took proper corrective or preventive measures for repair.
  • Interpreted schematics, blueprints and diagrams to complete projects on time.
  • Resolved safety issues related to faulty wiring installation practices in a timely manner.
  • Assessed, tested and operated variety of electrical components and systems.
  • Installed grounding system per NEC code requirements.
  • Evaluated electrical systems, equipment, and components to identify and resolve defects and safety risks.
  • Tested entire electrical assembly for performance levels and safety concerns.
  • Diagnosed malfunctioning systems, apparatus and components to locate cause of breakdowns and correct problems.
  • Oversaw project details and adhered to diagnosis, wiring and OSHA regulations.
  • Diagnosed malfunctioning systems using schematics diagrams and test instruments such as digital multimeters.
  • Developed preventive maintenance programs for lighting systems, motors and controls.
  • Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.
  • Reviewed and assessed electrical, mechanical and architectural diagrams and specifications to accurately complete projects.
  • Contributed to various projects, providing value to department, company and client base.
  • Troubleshot EMCS and variable frequency drive systems to correct and rectify issues.
  • Calibrated instruments to ensure accuracy of readings.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Dismantled electrical components using hand tools to disconnect and restore wiring connections.
  • Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
  • Trained workers to install, maintain and repair electrical equipment and fixtures.
  • Planned layout and installation of wiring and fixtures based on project specifications and building codes.
  • Fabricated parts according to specifications using hand and power tools.
  • Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
  • Collaborated with architects on electrical systems design for new construction.

Electrician

Countryside electric
Columbus, OH
01.2019 - 01.2021
  • Installed electrical wiring and fixtures in residential and commercial buildings.
  • Conducted routine inspections of electrical systems for safety and compliance.
  • Diagnosed electrical issues and performed necessary repairs efficiently.
  • Overhead wiring why it live
  • Collaborated with contractors to ensure project specifications were met.
  • Assisted in the installation of energy-efficient lighting systems.
  • Maintained tools and equipment to ensure operational readiness.
  • Followed safety protocols to prevent workplace accidents and hazards.
  • Provided guidance to junior electricians during installations and repairs.
  • Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
  • Installed conduit, wire and motor controls.
  • Connected wires to circuit breakers, transformers, or other components.
  • Connected wires to circuit breakers and transformers.
  • Repaired or replaced worn or defective parts using hand tools and power tools.
  • Ensured that all work was completed in accordance with applicable codes.
  • Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
  • Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
  • Identified problems with electrical systems by observing operation, listening for problems and using test equipment such as multi-meters.
  • Diagnosed issues in electrical circuits and equipment and took proper corrective or preventive measures for repair.
  • Interpreted schematics, blueprints and diagrams to complete projects on time.
  • Resolved safety issues related to faulty wiring installation practices in a timely manner.
  • Inspected electrical equipment and systems to identify hazards, defects and the need for adjustment or repair.
  • Assessed, tested and operated variety of electrical components and systems.
  • Installed grounding system per NEC code requirements.
  • Responded to emergency callbacks and provided onsite support.
  • Evaluated electrical systems, equipment, and components to identify and resolve defects and safety risks.
  • Tested entire electrical assembly for performance levels and safety concerns.
  • Diagnosed malfunctioning systems, apparatus and components to locate cause of breakdowns and correct problems.
  • Oversaw project details and adhered to diagnosis, wiring and OSHA regulations.
  • Diagnosed malfunctioning systems using schematics diagrams and test instruments such as digital multimeters.
  • Developed preventive maintenance programs for lighting systems, motors and controls.
  • Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.
  • Reviewed and assessed electrical, mechanical and architectural diagrams and specifications to accurately complete projects.
  • Contributed to various projects, providing value to department, company and client base.
  • Maintained current electrician's license or identification card to meet governmental regulations.
  • Prepared sketches showing location of wiring and equipment or followed diagrams during installation process.
  • Troubleshot EMCS and variable frequency drive systems to correct and rectify issues.
  • Calibrated instruments to ensure accuracy of readings.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Dismantled electrical components using hand tools to disconnect and restore wiring connections.
  • Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
  • Trained workers to install, maintain and repair electrical equipment and fixtures.
  • Planned layout and installation of wiring and fixtures based on project specifications and building codes.
  • Fabricated parts according to specifications using hand and power tools.
  • Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
  • Collaborated with architects on electrical systems design for new construction.

Electrician

Synergy electric
Columbus, OH
01.2016 - 01.2019
  • Installed electrical wiring and fixtures in residential and commercial buildings.
  • Conducted routine inspections of electrical systems for safety and compliance.
  • Diagnosed electrical issues and performed necessary repairs efficiently.
  • Overhead wiring why it live
  • Collaborated with contractors to ensure project specifications were met.
  • Assisted in the installation of energy-efficient lighting systems.
  • Maintained tools and equipment to ensure operational readiness.
  • Followed safety protocols to prevent workplace accidents and hazards.
  • Provided guidance to junior electricians during installations and repairs.
  • Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
  • Connected wires to circuit breakers, transformers, or other components.
  • Connected wires to circuit breakers and transformers.
  • Repaired or replaced worn or defective parts using hand tools and power tools.
  • Ensured that all work was completed in accordance with applicable codes.
  • Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
  • Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
  • Identified problems with electrical systems by observing operation, listening for problems and using test equipment such as multi-meters.
  • Diagnosed issues in electrical circuits and equipment and took proper corrective or preventive measures for repair.
  • Interpreted schematics, blueprints and diagrams to complete projects on time.
  • Resolved safety issues related to faulty wiring installation practices in a timely manner.
  • Inspected electrical equipment and systems to identify hazards, defects and the need for adjustment or repair.
  • Assessed, tested and operated variety of electrical components and systems.
  • Installed grounding system per NEC code requirements.
  • Evaluated electrical systems, equipment, and components to identify and resolve defects and safety risks.
  • Tested entire electrical assembly for performance levels and safety concerns.
  • Diagnosed malfunctioning systems, apparatus and components to locate cause of breakdowns and correct problems.
  • Oversaw project details and adhered to diagnosis, wiring and OSHA regulations.
  • Diagnosed malfunctioning systems using schematics diagrams and test instruments such as digital multimeters.
  • Developed preventive maintenance programs for lighting systems, motors and controls.
  • Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.
  • Contributed to various projects, providing value to department, company and client base.
  • Assisted with the layout of large scale industrial plant projects.
  • Troubleshot EMCS and variable frequency drive systems to correct and rectify issues.
  • Calibrated instruments to ensure accuracy of readings.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Dismantled electrical components using hand tools to disconnect and restore wiring connections.
  • Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
  • Trained workers to install, maintain and repair electrical equipment and fixtures.
  • Planned layout and installation of wiring and fixtures based on project specifications and building codes.
  • Installed leads and connected cables to motors, apparatus and equipment.
  • Fabricated parts according to specifications using hand and power tools.
  • Addressed and resolved worksite safety hazards to reduce risk.
  • Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
  • Collaborated with architects on electrical systems design for new construction.

Electrician

Countryside electric
Columbus, OH
01.2014 - 01.2016
  • Installed electrical wiring and fixtures in residential and commercial buildings.
  • Overhead wiring why it live
  • Conducted routine inspections of electrical systems for safety and compliance.
  • Diagnosed electrical issues and performed necessary repairs efficiently.
  • Collaborated with contractors to ensure project specifications were met.
  • Assisted in the installation of energy-efficient lighting systems.
  • Maintained tools and equipment to ensure operational readiness.
  • Followed safety protocols to prevent workplace accidents and hazards.
  • Provided guidance to junior electricians during installations and repairs.
  • Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
  • Installed conduit, wire and motor controls.
  • Connected wires to circuit breakers, transformers, or other components.
  • Connected wires to circuit breakers and transformers.
  • Ensured that all work was completed in accordance with applicable codes.
  • Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
  • Identified problems with electrical systems by observing operation, listening for problems and using test equipment such as multi-meters.
  • Diagnosed issues in electrical circuits and equipment and took proper corrective or preventive measures for repair.
  • Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
  • Interpreted schematics, blueprints and diagrams to complete projects on time.
  • Resolved safety issues related to faulty wiring installation practices in a timely manner.
  • Inspected electrical equipment and systems to identify hazards, defects and the need for adjustment or repair.
  • Assessed, tested and operated variety of electrical components and systems.
  • Installed grounding system per NEC code requirements.
  • Evaluated electrical systems, equipment, and components to identify and resolve defects and safety risks.
  • Tested entire electrical assembly for performance levels and safety concerns.
  • Diagnosed malfunctioning systems, apparatus and components to locate cause of breakdowns and correct problems.
  • Developed accurate estimates and proposals to perform electrical installations and troubleshooting.
  • Oversaw project details and adhered to diagnosis, wiring and OSHA regulations.
  • Diagnosed malfunctioning systems using schematics diagrams and test instruments such as digital multimeters.
  • Developed preventive maintenance programs for lighting systems, motors and controls.
  • Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.
  • Assisted with the layout of large scale industrial plant projects.
  • Troubleshot EMCS and variable frequency drive systems to correct and rectify issues.
  • Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Trained workers to install, maintain and repair electrical equipment and fixtures.
  • Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
  • Planned layout and installation of wiring and fixtures based on project specifications and building codes.
  • Fabricated parts according to specifications using hand and power tools.
  • Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
  • Collaborated with architects on electrical systems design for new construction.

Electrician

Graham electric
Columbus, OH
01.2012 - 01.2014
  • Installed electrical wiring and fixtures in residential and commercial buildings.
  • Conducted routine inspections of electrical systems for safety and compliance.
  • Diagnosed electrical issues and performed necessary repairs efficiently.
  • Collaborated with contractors to ensure project specifications were met.
  • Assisted in the installation of energy-efficient lighting systems.
  • Maintained tools and equipment to ensure operational readiness.
  • Followed safety protocols to prevent workplace accidents and hazards.
  • Provided guidance to junior electricians during installations and repairs.
  • Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
  • Installed conduit, wire and motor controls.
  • Connected wires to circuit breakers, transformers, or other components.
  • Repaired or replaced worn or defective parts using hand tools and power tools.
  • Ensured that all work was completed in accordance with applicable codes.
  • Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
  • Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
  • Identified problems with electrical systems by observing operation, listening for problems and using test equipment such as multi-meters.
  • Diagnosed issues in electrical circuits and equipment and took proper corrective or preventive measures for repair.
  • Interpreted schematics, blueprints and diagrams to complete projects on time.
  • Resolved safety issues related to faulty wiring installation practices in a timely manner.
  • Inspected electrical equipment and systems to identify hazards, defects and the need for adjustment or repair.
  • Assessed, tested and operated variety of electrical components and systems.
  • Installed grounding system per NEC code requirements.
  • Evaluated electrical systems, equipment, and components to identify and resolve defects and safety risks.
  • Tested entire electrical assembly for performance levels and safety concerns.
  • Diagnosed malfunctioning systems, apparatus and components to locate cause of breakdowns and correct problems.
  • Oversaw project details and adhered to diagnosis, wiring and OSHA regulations.
  • Diagnosed malfunctioning systems using schematics diagrams and test instruments such as digital multimeters.
  • Developed preventive maintenance programs for lighting systems, motors and controls.
  • Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.
  • Troubleshot EMCS and variable frequency drive systems to correct and rectify issues.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
  • Trained workers to install, maintain and repair electrical equipment and fixtures.
  • Planned layout and installation of wiring and fixtures based on project specifications and building codes.
  • Addressed and resolved worksite safety hazards to reduce risk.
  • Supervised apprentices and assessed completed tasks, offering guidance and encouragement.

Electrician

Exact electric
Columbus, OH
01.2010 - 01.2012
  • Installed electrical wiring and fixtures in residential buildings.
  • Conducted routine inspections of electrical systems for safety and compliance.
  • Diagnosed electrical issues and performed necessary repairs efficiently.
  • Panel change
  • Read blueprints
  • Box out house
  • Installed electrical wiring and fixtures in residential and commercial buildings.
  • Collaborated with contractors to ensure project specifications were met.
  • Assisted in the installation of energy-efficient lighting systems.
  • Maintained tools and equipment to ensure operational readiness.
  • Followed safety protocols to prevent workplace accidents and hazards.
  • Provided guidance to junior electricians during installations and repairs.
  • Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
  • Installed conduit, wire and motor controls.
  • Connected wires to circuit breakers, transformers, or other components.
  • Connected wires to circuit breakers and transformers.
  • Repaired or replaced worn or defective parts using hand tools and power tools.
  • Ensured that all work was completed in accordance with applicable codes.
  • Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
  • Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
  • Identified problems with electrical systems by observing operation, listening for problems and using test equipment such as multi-meters.
  • Diagnosed issues in electrical circuits and equipment and took proper corrective or preventive measures for repair.
  • Interpreted schematics, blueprints and diagrams to complete projects on time.
  • Resolved safety issues related to faulty wiring installation practices in a timely manner.
  • Assessed, tested and operated variety of electrical components and systems.
  • Installed grounding system per NEC code requirements.
  • Evaluated electrical systems, equipment, and components to identify and resolve defects and safety risks.
  • Tested entire electrical assembly for performance levels and safety concerns.
  • Diagnosed malfunctioning systems, apparatus and components to locate cause of breakdowns and correct problems.
  • Diagnosed malfunctioning systems using schematics diagrams and test instruments such as digital multimeters.
  • Developed preventive maintenance programs for lighting systems, motors and controls.
  • Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.
  • Connected wires to circuit breakers, junction boxes and components in residential properties.
  • Planned layout and installation of wiring and fixtures based on project specifications and building codes.
  • Trained workers to install, maintain and repair electrical equipment and fixtures.
  • Dismantled electrical components using hand tools to disconnect and restore wiring connections.
  • Pulled insulated wires or cables through conduits to complete circuits.

Education

Ged
Columbus, Ohio

Skills

  • Electrical installations
  • Wiring diagrams
  • Circuit troubleshooting
  • Safety inspections
  • Overhead wiring when live
  • Voltage testing
  • Project coordination
  • Equipment maintenance
  • Critical thinking
  • Team collaboration
  • Effective communication
  • Technical training
  • Problem solving
  • National electrical code
  • Test equipment operation
  • Junction box assembly
  • Excellent written and verbal communication skills
  • Residential electric construction
  • Quality assurance
  • Electrical repairs
  • Sub-panel installation
  • Low-voltage systems
  • Power distribution
  • Safety management
  • Knowledge of standard for electrical safety in the workplace (NFPA 70E)
  • Load calculations
  • Blueprint fluency
  • Troubleshooting and repairs
  • Code compliance
  • Lighting systems
  • National electric codes (NEC)
  • Job planning
  • Electrical experience
  • Field installation expert
  • Circuit design
  • Fixture installation
  • Circuit breaker installation
  • Underground wiring
  • Complex issues management
  • Schematic reading
  • Technical documentation
  • Circuit testing
  • Residential construction
  • Problem-solving

Timeline

Electrician

Efficient electric
01.2021 - 01.2025

Electrician

Countryside electric
01.2019 - 01.2021

Electrician

Synergy electric
01.2016 - 01.2019

Electrician

Countryside electric
01.2014 - 01.2016

Electrician

Graham electric
01.2012 - 01.2014

Electrician

Exact electric
01.2010 - 01.2012

Ged
Randy Hogle